Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Characteristic Impedance: 50 ohm; Body Depth: .77 inch;
Median Price
$4.800
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Verical
1+ parts
$4.740
100+ parts
$4.650
1k+ parts
$4.490
10k+ parts
-
Mouser Electronics
$6.950
$5.030
$4.370
PEI Genesis
DigiKey
$4.630
$4.550
$4.470
Chip1Stop
$5.000
$4.530
$4.220
Newark
$5.130
Avnet
Farnell
$4.860
Master Electronics
$4.390
$4.230
Powell Electronics
Vyrian
$4.440
TestEquity
$4.810
Digiode
$7.277
IBS Electronics
$4.775
$4.600
$4.188
Component Sense
Corphita
$6.894
Andel Nordic
$8.920
$8.563
SSMA Connectors 73251-2209 attributes and parameters. Explore more SSMA Connectors devices from Molex
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insertion Loss:
Insulation Resistance:
Insulator Material:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
73251-2209 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
24-1080-1201D
Phoenix Contact
RF SMA/SSMA Connectors; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Ports: 1; Maximum Insertion Force (N): 3.892;
5350-3
Carlisle Interconnect Technologies
The Carlisle Interconnect Technologies 5350-3 is an RF SMA CONNECTOR with MALE contact gender and COAX style. It features a 0.05" terminal length, STRAIGHT mounting style, and LOCKING option. Ideal for commercial applications requiring reliable SSMA connectors.
M39012/55-4502
Kings Electronics
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 12.4 GHz; Body or Shell Style: PLUG; Characteristic Impedance: 50 ohm;
142-0403-011
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .21 dB; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
142-0801-811
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; JESD-609 Code: e4; Panel Mount: NO;
16_SMA-50-2-53/119_NH
Huber+suhner Ag
16_SMA-50-2-53/119_NH by Huber+suhner Ag is an RF SMA connector with gold-plated nickel finish, suitable for commercial applications. With a characteristic impedance of 50 ohm and max operating frequency of 18 GHz, it offers durability up to 500 cycles. This threaded coupling type connector has a temperature range from -65°C to 165°C, making it ideal for various RF cable mounting setups.
SF1211-6062
Sv Microwave
SF1211-6062 by Sv Microwave is a SSMA Connector with 50 ohm impedance, 0.12 dB insertion loss, and 1.25 VSWR. Ideal for RF SMP applications up to 26.5 GHz, it features PTFE insulation, steel shell material, and can withstand temperatures from -65 to 165 °C.
1052030-1
TE Connectivity
TE Connectivity's 1052030-1 is an RF SMA connector with threaded coupling, TFE insulator, and gold shell finish. With 50 ohm impedance, it operates from -65 to 165°C and handles RG 196 cables. Ideal for commercial applications up to 12.4 GHz requiring high insulation resistance and low insertion loss.
142-0711-821
Bel Fuse
Bel Fuse's 142-0711-821 is an RF SMA connector with 50 ohm impedance, 1400VAC dielectric voltage, and -65 to 165 °C operating range. Ideal for commercial applications requiring a durable, female contact jack with POLYTETRAFLUOROETHYLENE insulator material.
16_SMA-50-2-43/133_NE
16_SMA-50-2-43/133_NE by Huber+suhner Ag is a threaded RF SMA connector with 50 ohm impedance, gold over nickel finish, and brass shell. It operates b/w -65 to 165 °C, suitable for applications requiring durability of 500 cycles at up to 18 GHz frequency. Compatible with cable types EZ_86_TP_M17, SUCOFORM_86, MULTIFLEX_86 for solder termination in male plug configuration.
142-0203-101
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD; Coupling Type: THREADED; Termination Type: CLAMP;
5692
Connecting Devices
RF SMA CONNECTOR; Contact Gender: FEMALE; JESD-609 Code: e4; DIN Conformance: NO; Characteristic Impedance: 50 ohm; Termination Contact Finish: GOLD (50);
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED; Termination Type: SURFACE MOUNT;
875-82-17
The Kings Electronics 875-82-17 is an RF SMA connector with threaded coupling, gold finish, and PTFE insulator. With a characteristic impedance of 50 ohm and max operating frequency of 12.4 GHz, it's ideal for high-frequency applications in military and aerospace industries.
1052523-1
Tyco Electronics Amp
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Insulator Material: POLYTETRAFLUOROETHYLENE; Maximum Operating Frequency: 18 GHz;
R125176000
Radiall S A
The Radiall S A R125176000 SSMA Connector features 0.25 dB insertion loss, GOLD termination contact finish, and threaded coupling type. Ideal for RF applications up to 12.4 GHz, with a characteristic impedance of 50 ohm. Suitable for cable mounting with right angle plug style.
1052962-1
TE Connectivity's 1052962-1 SSMA Connector has a body length of 0.375", insertion loss of 0.07 dB, and insulation resistance of 5000000000 ohm. Ideal for RF applications, this threaded connector features a max operating frequency of 12.4 GHz and is designed with a characteristic impedance of 50 ohm.
132101
Amphenol
Amphenol 132101 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 18 GHz with POLYTETRAFLUOROETHYLENE insulator material, BRASS contact material, and 50 ohm impedance. Suitable for cable mounting with SOLDER termination type and MALE contact gender.
R124.426.123
Radiall S A's R124.426.123 SSMA Connector features 0.21 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 18 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and FEMALE contact gender.
142-9701-211
Bel Fuse's 142-9701-211 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and 0.375" Body Depth. Ideal for RF applications up to 18 GHz, with POLYTETRAFLUOROETHYLENE insulator material and GOLD shell finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Molex
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved