Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol M39012553126 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and 165°C Max Operating Temperature. Ideal for RF applications with RG-316 cable types, it offers a characteristic impedance of 50 ohm and can operate up to 12.4 GHz frequency.
Median Price
$13.930
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Arrow
1+ parts
$5.785
100+ parts
-
1k+ parts
$1.415
10k+ parts
Heilind Electronics
$10.268
$8.668
Farnell
$10.680
$9.980
$9.290
AE Petsche
$12.075
Interstate Connecting
$13.236
$12.365
$12.048
TTI
$12.700
$12.560
Newark
$12.580
Mouser Electronics
$16.260
$13.520
$12.740
DigiKey
$20.540
$14.838
$13.247
Element14
$22.720
$19.190
$17.690
Powell Electronics
$23.900
$16.310
Fairview Microwave
$40.990
Verical
Master Electronics
$14.120
$12.800
BTC Electronics
Freelance Electronics
$8.117
$8.523
$8.036
Nova Conductors
$9.165
Digiode
$11.134
Electro Enterprises
$12.584
$10.330
$9.481
$10.178
Component Electronics Inc.
$15.380
$11.540
$10.000
Microwave Components, LLC
Vyrian
Electro Sonic
$12.830
$10.050
LWI Electronics Inc
IBS Electronics
$14.291
TME
$13.800
American Connector Supply Corp
FDH Electronics
Bristol Electronics
MISTER SPROCKETS
R&J Components
Gateway Technologies
$8.156
Netroflash
Ampacity Inc.
$9.960
Singapore Electronics
$10.081
$9.375
$8.972
$8.568
Corphita
$10.548
Argo Parts USA
Continental Prestige Electronics
Authorized Procurement Solutions
Speed Components Ltd (Excess)
The small body diameter allows for a compact and efficient design, making it suitable for applications where space is limited.
High insulation resistance ensures reliable and stable performance, reducing the risk of signal interference or loss.
Withstanding high voltage ensures safety and protection for the equipment and users, making it suitable for demanding environments.
The high maximum operating temperature allows for use in a wide range of temperature environments, increasing the product's versatility.
The low minimum operating temperature ensures the product can also be used in extreme cold conditions, enhancing its reliability in various settings.
Cable mounting type makes installation easy and convenient, allowing for a secure and reliable connection.
The 50 ohm characteristic impedance is widely used in RF applications, ensuring compatibility and efficient signal transmission.
Low contact resistance helps in maintaining signal integrity and minimizing signal loss, ensuring high performance.
The high maximum operating frequency makes it suitable for high-frequency applications, providing reliable and stable signal transmission.
Conforming to MIL standards ensures high reliability and quality, making it suitable for critical and mission-critical applications.
SSMA Connectors M39012553126 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Body Depth:
Body Diameter:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Contact Gender:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
MIL Conformity:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
M39012553126 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
5935-01-214-9569, 5935012149569
NIIN
012149569
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
RC0402FR-071KL
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
60312412114518
Wuerth Elektronik & Kg
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
132119RP
The Amphenol 132119RP is an RF SMA connector with a threaded coupling type, gold shell finish, and brass shell material. It has a panel mount option and is suitable for RG-174/U cable termination in commercial applications requiring reliable coax connections.
132281
Amphenol 132281 is an RF SMA Connector with 50 ohm impedance, 0.14 dB insertion loss, and gold termination. Ideal for panel mounting, it operates at up to 12.4 GHz frequency and conforms to MIL standards. Suitable for threaded coupling in applications requiring reliable signal transmission.
R124426123
Radiall S A
Radiall S A SSMA Connector R124426123 features 0.21 dB Insertion Loss, Gold (Au) - with Nickel (Ni) Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 18 GHz, with 50 ohm impedance and FEMALE contact gender.
R124.426.123
Radiall S A's R124.426.123 SSMA Connector features 0.21 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 18 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and FEMALE contact gender.
R125464274
The Radiall S A R125464274 is an RF SMA Connector with a threaded coupling type and gold termination contact finish. It features a low insertion loss of 0.18 dB and a VSWR of 1.12, making it ideal for applications requiring high-frequency performance up to 18 GHz in industries such as telecommunications and aerospace.
142-0721-871
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Durability: 500 Cycles;
1051651-1
TE Connectivity
TE Connectivity's 1051651-1 SSMA Connector features a body length of 1.187", insertion loss of 0.21 dB, and insulation resistance of 10^10 ohm. Ideal for RF applications with RG 142 cable types, it operates b/w -65 to 165 °C with a max frequency of 12.4 GHz.
142-0701-871
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mounting Style: STRAIGHT; IEC Conformity: NO;
142-1711-026
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: RECEPTACLE; Contact Material: NOT SPECIFIED;
132134-10
Amphenol 132134-10 is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for surface mount termination in applications requiring a female jack connector on a straight board mount.
142-1701-841
Bel Fuse
RF SMA CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
142-0335-401
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (30); IEC Conformity: NO; Coupling Type: THREADED;
142-0694-101
Bel Fuse's 142-0694-101 is an RF SMA connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 18 GHz and can withstand temperatures ranging from -65 to 165 °C. This panel-mounted connector, made of brass, is commonly used in commercial applications requiring reliable and durable connections for RG-402 cables.
142-0761-801
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; Voltage Standing Wave Ratio: 1.5; Insulator Material: POLYTETRAFLUOROETHYLENE;
MP-19-02V-11-TGG
RF SMA CONNECTOR;
1051639-1
TE Connectivity's 1051639-1 SSMA Connector features TFE insulator, gold shell finish, and 50 ohm impedance. Ideal for RF applications up to 18 GHz with RG 141 cable termination in commercial settings.
901-10011
Amphenol 901-10011 SSMA Connector features 0.11 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and CRIMP SOLDER termination. Suitable for cable mounting with MALE contact gender in a PLUG body style.
SF2921-61345-1S
Sv Microwave
132113RP
Amphenol's 132113RP is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a characteristic impedance of 50 ohm and is commonly used with RG-58C/U cables for commercial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M39012/55-3009
TE Connectivity's M39012/55-3009 is a threaded RF SMA connector with a 50 ohm characteristic impedance. It has a max operating frequency of 12.4 GHz and can be used with cable types RG 58, RG 142, and RG 223. Ideal for applications requiring high insulation resistance and low insertion loss.
Kings Electronics
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: THREADED; Termination Contact Finish: GOLD; Filter Feature: NO;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER; Contact Material: BERYLLIUM COPPER/COPPER ALLOY;
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Manufacturer Series: SMA; Coupling Type: THREADED;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Termination Contact Finish: GOLD; Characteristic Impedance: 75 ohm;
M39012/94-3003
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Connectors: ONE;
Winchester Interconnect
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: M39012/94; Mating Contact Finish: NOT SPECIFIED; Insulator Material: POLYTETRAFLUOROETHYLENE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Termination Type: SOLDER; Additional Features: STANDARD: MIL-C-39012;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO; Coupling Type: THREADED;
M39012/26-0101
RF TNC CONNECTOR; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; Body Depth: 1.108 inch; Body Diameter: .625 inch; Mounting Style: STRAIGHT;
M39012/57-3029
RF SMA CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Ports: 1; Minimum Operating Temperature: -65 Cel; Coupling Type: THREADED;
RF SMA CONNECTOR; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1; Insulation Resistance: 5000000000 ohm; Mounting Type: CABLE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: SMA; Body or Shell Style: JACK; Filter Feature: NO;
M39012/93-3001
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Panel Mount: NO; Characteristic Impedance: 50 ohm;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: STANDARD: MIL-C-39012; Mounting Type: BOARD; Mounting Style: STRAIGHT;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Termination Type: SOLDER; Mounting Style: STRAIGHT;
M39012/80B3101
RF SMA CONNECTOR; Reliability: MIL-G-45204; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Style: RIGHT ANGLE; Minimum Operating Temperature: -65 Cel;
TE Connectivity's M39012/80B3101 is a threaded RF SMA connector with a body length of 0.68 inch and depth of 0.666 inch. It has an insulation resistance of 5G ohm, operates at temperatures ranging from -65 to 165 °C, and is commonly used in MIL-C-39012 applications.
M39012/55-3030
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: SMA; Additional Features: STANDARD: MIL-C-39012; DIN Conformance: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved