Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 901-10309 is an RF SMA connector with a dielectric voltage of 1400VAC, operating at -65 to 165°C. With a characteristic impedance of 50 ohm and max frequency of 18 GHz, it's ideal for commercial applications requiring durability up to 100 cycles. The SSMA connector features a gold finish, PTFE insulator, and brass shell for reliable surface mount board mounting.
Median Price
$8.710
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$3.964
100+ parts
$1.931
1k+ parts
-
10k+ parts
Farnell
$7.720
$5.590
$5.170
Powell Electronics
$8.700
Mouser Electronics
$8.720
$6.290
DigiKey
$6.298
$5.354
Newark
$12.770
$10.550
$9.560
Element14
$13.750
$9.130
$7.660
Verical
$6.272
$5.026
Nova Conductors
$4.810
VNN
Vyrian
Electro Sonic
$6.040
$4.350
$4.280
IBS Electronics
$7.995
$5.759
$5.629
Ampacity Inc.
$3.370
Gateway Technologies
Netroflash
Singapore Electronics
$5.290
$4.919
$4.708
$4.496
Continental Prestige Electronics
$8.670
$7.020
Argo Parts USA
Kepictronics
The compact body length makes this connector suitable for applications with limited space requirements.
The small body width allows for a high density of connectors to be used in a given area, making it ideal for crowded PCB layouts.
The high dielectric voltage rating ensures reliable performance and safety in high voltage applications.
The shallow body depth saves space on the PCB and allows for a lower profile design.
The use of PTFE insulator material provides excellent electrical properties and ensures stable performance over a wide temperature range.
The high maximum operating temperature allows this connector to be used in harsh environment applications without compromising performance.
The low minimum operating temperature ensures reliable operation in extreme cold conditions.
The gold shell finish provides excellent conductivity and corrosion resistance, ensuring a long-lasting connection.
The RF SMA connector type is a popular and widely used standard in the industry, making this product compatible with a wide range of devices.
The low VSWR of 1.3 indicates minimal signal loss and high efficiency in signal transmission.
The natural insulator color provides easy identification and helps with quick and accurate assembly.
The high durability rating of 100 cycles ensures a long product life and reliable performance over multiple mating cycles.
The board mounting type allows for easy and secure installation on PCBs, making it suitable for automated assembly processes.
The 50 ohm characteristic impedance is standard for RF applications, ensuring compatibility with a wide range of equipment.
The brass shell material provides durability and excellent shielding properties, ensuring a stable RF connection.
The surface mount termination type simplifies installation and allows for a compact and low-profile design.
The jack style allows for easy and secure connection, making it ideal for applications that require frequent mating and unmating.
The coaxial contact style ensures a reliable and low-loss RF connection for high-frequency applications.
The locking mounting option provides a secure and stable connection, preventing accidental disconnection.
The high maximum operating frequency of 18 GHz makes this connector suitable for high-speed data transmission in RF applications.
The commercial reliability rating ensures consistent performance and quality, making this connector a reliable choice for a wide range of applications.
SSMA Connectors 901-10309 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
901-10309 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Hitachi
2018.42.2520.005
Ims Connector Systems
2018.42.2520.005 by Ims Connector Systems is an RF SMA connector with a threaded coupling type, suitable for board and panel mounting. Featuring a characteristic impedance of 50 ohm, it offers low insertion loss of 0.127 dB and high insulation resistance of 5 Gohm. Ideal for applications requiring durability with 500 cycles, this connector operates b/w -55 to 125°C and supports frequencies up to 18 GHz.
5691
Connecting Devices
RF SMA CONNECTOR; Contact Gender: FEMALE; Coupling Type: THREADED; Mounting Style: STRAIGHT; IEC Conformity: NO; MIL Conformity: NO;
1052522-1
TE Connectivity
TE Connectivity's 1052522-1 SSMA Connector features a threaded coupling type, TFE insulator material, and gold shell finish. With a 50 ohm impedance and 18 GHz operating frequency, it is ideal for RF applications requiring high reliability in commercial settings. The panel-mount connector has a female contact gender and straight mounting style for easy installation.
5972-3CC
RF SMA CONNECTOR; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Manufacturer Series: SMA; Panel Mount: YES; Mating Contact Finish: GOLD (50);
R125175000
Radiall S A
R125175000 by Radiall S A is an RF SMA connector with a 50 ohm impedance and gold termination contacts. Featuring a threaded coupling type, it offers low insertion loss of 0.25 dB and operates up to 12.4 GHz. Ideal for applications requiring high-frequency signal transmission in aerospace, telecommunications, and military industries.
R125.414.000
Radiall S A's R125.414.000 is a panel mount RF SMA connector with a threaded coupling type and gold termination contact finish. It has an insertion loss of 0.34 dB, voltage standing wave ratio of 1.11, and max operating frequency of 18 GHz. This connector is commonly used in applications requiring a 50 ohm characteristic impedance and straight mounting style.
R125464274
The Radiall S A R125464274 is an RF SMA Connector with a threaded coupling type and gold termination contact finish. It features a low insertion loss of 0.18 dB and a VSWR of 1.12, making it ideal for applications requiring high-frequency performance up to 18 GHz in industries such as telecommunications and aerospace.
1053378-1
TE Connectivity 1053378-1 is an RF SMA connector with gold finish, suitable for commercial applications. With a characteristic impedance of 50 ohm and max operating frequency of 12.4 GHz, it offers high insulation resistance of 10^10 ohm. The threaded coupling type and right angle mounting style make it ideal for board mounting in various electronic devices.
1340153
Phoenix Contact
RF SMA CONNECTOR;
142-0701-501
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: SMA; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
M39012/60-3001
TE Connectivity's M39012/60-3001 SSMA Connector features gold termination, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 18 GHz with a temperature range of -65 to 125°C. Suitable for panel mounting in high-frequency systems requiring reliable signal transmission.
142-0711-811
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Additional Features: STANDARD: MIL-C-39012; Mating Contact Finish: GOLD;
142-0694-101
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: VSWR AT 12.4 GHZ: 1.34, INSERTION LOSS MAX AT 10 GHZ; JESD-609 Code: e4; Panel Mount: NO;
142-0203-101
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Filter Feature: NO; Mating Contact Finish: GOLD (30);
142-0711-201
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Type: BOARD; Mating Contact Finish: NOT SPECIFIED;
2037-5008-00
TE Connectivity's 2037-5008-00 SSMA Connector features an Insulation Resistance of 10^10 ohm, Insertion Loss of 0.07 dB, and Dielectric Withstanding Voltage of 750VAC. Ideal for RF applications up to 18 GHz with RG-188 cable types, this connector has a threaded coupling type and operates b/w -65°C to 105°C.
132284
Amphenol 132284 is an RF SMA Connector with 0.14 dB Insertion Loss, 1.4 VSWR, and 12.4 GHz Max Operating Frequency. It features a GOLD finish, POLYTETRAFLUOROETHYLENE insulator, and CRIMP termination for high-frequency applications in telecommunications and aerospace industries.
132135
Amphenol 132135 is an RF SMA connector with threaded coupling, gold finish, and PTFE insulator. It has a characteristic impedance of 50 ohm, solder termination, and male contact gender. Ideal for board mounting in applications requiring right-angle plug connectors.
SF2921-61506
Sv Microwave
R125414000
Radiall S A's R125414000 SSMA Connector features 0.296 dB Insertion Loss, 1.16 VSWR, and 50 ohm Impedance. With gold termination finish, it is ideal for RF applications up to 18 GHz requiring threaded coupling and panel mounting in straight configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
901-144-8RFX
Amphenol 901-144-8RFX is an RF SMA connector with 50 ohm impedance, 0.13 dB insertion loss, and 18 GHz operating frequency. Ideal for commercial applications, it features gold-plated contacts, PTFE insulator, and brass shell for durability in high-temp environments.
901-143-6RFX
Amphenol 901-143-6RFX is an SSMA connector with gold termination, PTFE insulator, and 50 ohm impedance. It operates b/w -65 to 165 °C, has 0.13 dB insertion loss, and can handle up to 18 GHz frequency. Ideal for RF applications requiring high durability and low VSWR.
901-10510-2
Amphenol's 901-10510-2 is an RF SMA connector with a threaded coupling type. It has a max operating frequency of 26.5 GHz and can withstand temperatures ranging from -65 to 165°C. This connector, suitable for board mounting, is commonly used in applications requiring high insulation resistance and low contact resistance.
901-144
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Total No. of Contacts: 1;
901-155-16
Amphenol 901-155-16 is an RF SMA connector with a dielectric voltage of 1400VAC, operating from -65 to 165°C. It has a gold finish, brass shell, and PTFE insulator suitable for RG-174/U cables. With a durability of 500 cycles, it's ideal for commercial applications requiring a 50 ohm impedance connection.
901-10025-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .25 dB; Termination Contact Finish: GOLD; MIL Conformity: NO;
901-10385
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Shell Finish: GOLD; Shell Material: BRASS; Voltage Standing Wave Ratio: 1.3;
901-10423
901-10512-1
RF SMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
901-10029-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 901-10029-RFX; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: PLUG;
901-10512-2
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
901-144-3
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Panel Mount: NO;
901-10512-3
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
901-144-4
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mating Contact Finish: NOT SPECIFIED;
901-10011
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 12.4 GHz; DIN Conformance: NO; Mounting Type: CABLE;
901-10172
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 700VAC; Body Width: .411 inch; Insulator Material: POLYTETRAFLUOROETHYLENE; Insulator Color: NATURAL;
901-10387
RF SMA CONNECTOR; Reliability: COMMERCIAL; Termination Type: SURFACE MOUNT; Voltage Standing Wave Ratio: 1.16; Body or Shell Style: JACK; Mounting Type: BOARD AND PANEL;
901-101-15
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Cable Types: RG-400/U;
901-1GA200000AE
901-10360-110
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Termination Type: SOLDER; Shell Finish: GOLD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved