Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AON6411 by Alpha & Omega Semiconductor is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 340A IDM and 245mJ EAS, operating in ENHANCEMENT MODE at -55 to 150 °C. The METAL-OXIDE SEMICONDUCTOR technology ensures 0.0036 ohm RDS(ON) and 1395pF Crss for efficient performance.
Median Price
$2.151
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.931
1k+ parts
$0.623
10k+ parts
-
DigiKey
$2.550
$1.118
$0.823
Verical
Nova Conductors
$0.724
TME
$1.060
$0.760
$0.710
Vyrian
VNN
Classic Components Corporation
Prism Electronics
Elcom Components
Advanced Electronics
$0.419
$0.381
$0.344
Aranea Global
$0.681
Argo Parts USA
Continental Prestige Electronics
Microchip USA
$4.644
AZTECH Wire
$20.140
Authorized Procurement Solutions
Kepictronics
This material provides good insulation and protection for the internal components of the FET.
P-channel FETs are known for their low ON resistance and high current carrying capability.
The built-in diode helps in protecting the FET from voltage spikes and reverse current flow.
Designed specifically for switching applications, ensuring efficient and fast switching operations.
Ideal for compact circuit designs and easy assembly on PCBs.
Suitable for low voltage applications, providing a safety margin for voltage spikes.
Capable of handling high peak currents, making it suitable for demanding applications.
Can withstand high energy spikes without damage, ensuring reliability in harsh conditions.
High power dissipation capability allows for continuous operation under heavy loads.
Can operate in high-temperature environments without compromising performance or reliability.
Power Field Effect Transistors (FET) AON6411 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Alpha & Omega Semiconductor
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
AON6411 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - AOYYY 08/Feb/2017
PCN Assembly/Origin - AOYYY 18/Oct/2016
Alpha and Omega Semiconductor is committed to excellence in design, manufacturing, and responsiveness to our customers through the continued development of new technologies, products and innovative solutions. We bring to the market devices designed to benefit our customers by meeting their product specific needs. Our mission is to bring value to our customers, shareholders and employees. We pride ourself in our expertise in all areas of power semiconductor technology and business operations. Our intellectual property and technical knowledge encompasses the latest advancements in the power semiconductor industry. AOS differentiates itself by integrating its Discrete and IC semiconductor process technology, product design, and advanced packaging know-how to develop high performance power management solutions. AOS's portfolio of products targets high-volume applications, including but not limited to portable computers, flat panel TVs, LED lighting, smart phones, battery packs, consumer and industrial motor controls and power supplies for TVs, computers, servers and telecommunications equipment.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200253
Molex
WIRE AND CABLE;
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
LM7805CT/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
NTF3055L108T1G
NTF3055L108T1G by Onsemi is a Power FET with 60V DS Breakdown Voltage, 9A IDM, and 0.12 ohm RDS(on). Ideal for switching applications, it features an N-CHANNEL configuration in a PLASTIC/EPOXY package with GULL WING terminals. Operating in enhancement mode, it has a max power dissipation of 2.1W and can withstand temperatures up to 175°C.
2N7002BKW,115
NXP Semiconductors
2N7002BKW,115 by NXP Semiconductors is an N-CHANNEL FET with a max drain current of 0.31A and power dissipation of 0.88W. It operates in enhancement mode, suitable for applications requiring a single configuration such as power management systems or voltage regulators.
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
FDS9926A
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 150 Cel;
IRF640
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Package Shape: RECTANGULAR; Package Style (Meter): FLANGE MOUNT;
BSC028N06NSTATMA1
Infineon Technologies
BSC028N06NSTATMA1 by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage, 0.0028 ohm max RDS(on), and 400A IDM. It's used for switching applications due to its built-in diode, small outline package style, and high pulsed drain current capacity.
SI7489DP-T1-GE3
Vishay Intertechnology's SI7489DP-T1-GE3 is a P-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features 40A IDM, 61mJ EAS, and 0.041 ohm Drain-Source On Resistance. Operating in Enhancement Mode, it has a max temp of 150°C and -55°C min temp.
FDMS86101A
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; Transistor Element Material: SILICON; Terminal Position: DUAL;
IRFP4568PBF
Infineon's IRFP4568PBF is a N-CHANNEL Power FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring 684A IDM and 0.0059 ohm RDS(on), it operates in ENHANCEMENT MODE up to 175°C. The PLASTIC/EPOXY package with THROUGH-HOLE terminals ensures reliable performance in high-power circuits.
FDMS86163P
FDMS86163P by Onsemi is a P-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 100A and EAS of 486mJ, operating in ENHANCEMENT MODE. With a package style of SMALL OUTLINE and -55 to 150 °C temperature range, it offers high performance in power management systems.
FDD6685
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 52 W; Qualification: Not Qualified; JESD-30 Code: R-PSSO-G2;
IRF7424TRPBF
Infineon's IRF7424TRPBF is a P-CHANNEL FET with 30V DS Breakdown Voltage, 11A Drain Current, and 0.0135 ohm On Resistance. Ideal for power applications in electronics due to its 2.5W Power Dissipation, -55 to 150°C Operating Temperature range, and compact SINGLE configuration for surface mount assembly.
JANTX2N6796
Semicoa
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Reference Standard: MIL-19500; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Minimum DS Breakdown Voltage: 100 V;
FQP27P06
FQP27P06 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 108A IDM, 560mJ EAS, and 0.07 ohm RDS(ON). Operating in ENHANCEMENT MODE, it has a max power dissipation of 120W at 175°C.
STW4N150
STW4N150 by STMicroelectronics is a N-CHANNEL FET with 1500V DS breakdown voltage, ideal for SWITCHING applications. It features 12A max pulsed drain current and 350mJ avalanche energy rating. The transistor operates in ENHANCEMENT MODE with 160W max power dissipation, making it suitable for high-power switching circuits.
IRF7205TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Peak Reflow Temperature (C): 260; JESD-30 Code: R-PDSO-G8;
FQB34N20LTM
FQB34N20LTM by Onsemi is a N-CHANNEL Power FET with 200V DS Breakdown Voltage and 124A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has an EAS of 640mJ and 0.08 ohm Drain-Source On Resistance.
2N7002K
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Maximum Drain Current (Abs) (ID): .34 A; Operating Mode: ENHANCEMENT MODE;
SI7252DP-T1-GE3
Vishay Intertechnology's SI7252DP-T1-GE3 is a N-channel Power FET with 100V DS breakdown voltage, ideal for switching applications. Featuring separate elements with built-in diode, it has 80A max pulsed drain current and 0.017 ohm max drain-source resistance. Its small outline package and matte tin finish make it suitable for surface mount designs.
FQB22P10TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; No. of Elements: 1; Terminal Finish: MATTE TIN;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AON6512
Alpha & Omega Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 83 W; Package Style (Meter): SMALL OUTLINE; Minimum DS Breakdown Voltage: 30 V;
AON6294
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Case Connection: DRAIN; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
AON6702L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 83 W; Terminal Position: DUAL; No. of Elements: 1;
AON6202
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 35 W; Terminal Form: FLAT; Maximum Drain-Source On Resistance: .0055 ohm;
AON6850
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 56 W; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDSO-F8;
AON6400
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 83 W; Case Connection: DRAIN; Package Style (Meter): SMALL OUTLINE;
AON6454
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 83 W; Maximum Drain-Source On Resistance: .045 ohm; Case Connection: DRAIN;
AON6236
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 39 W; Terminal Position: DUAL; Avalanche Energy Rating (EAS): 54 mJ;
AON6232
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 83 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Body Material: PLASTIC/EPOXY;
AON6526
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 25 W; No. of Elements: 1; Package Style (Meter): SMALL OUTLINE;
AON6538
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 35.5 W; Maximum Drain Current (ID): 75 A; Case Connection: DRAIN;
AON6524
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 35.5 W; Avalanche Energy Rating (EAS): 26 mJ; Minimum Operating Temperature: -55 Cel;
AON6752
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 83 W; Minimum DS Breakdown Voltage: 30 V; Operating Mode: ENHANCEMENT MODE;
AON6428
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 30 W; Minimum DS Breakdown Voltage: 30 V; Package Shape: RECTANGULAR;
AON6704
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Pulsed Drain Current (IDM): 250 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
AON6718
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
AON6414A
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 31 W; JESD-30 Code: R-PDSO-F8; Package Style (Meter): SMALL OUTLINE;
AON6590
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Pulsed Drain Current (IDM): 400 A; Terminal Position: DUAL; Avalanche Energy Rating (EAS): 634 mJ;
AON6152
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 100 A; Terminal Position: DUAL; Transistor Application: SWITCHING;
AON6314
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 32.5 W; Maximum Drain Current (Abs) (ID): 85 A; Operating Mode: ENHANCEMENT MODE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved