Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
DP83848MPHPREP
Texas Instruments
DP83848MPHPREP by Texas Instruments is a 3.3V Ethernet transceiver with 100000 Mbps data rate. It operates in temperatures from -55 to 125 °C and has a MILITARY grade. The package style is FLATPACK, suitable for network interfaces in various applications.
100000 Mbps
S-PQFP-G48
e4
7 mm
4
1
48
125 Cel
-55 Cel
PLASTIC/EPOXY
HTFQFP
TQFP48,.35SQ
SQUARE
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
260
3.3
1.2 mm
Network Interfaces
3.3 V
YES
CMOS
ETHERNET TRANSCEIVER
MILITARY
NICKEL PALLADIUM GOLD
GULL WING
.5 mm
QUAD
30
TLK111PTR
TLK111PTR by Texas Instruments is an Ethernet transceiver with 4 transceivers, supporting data rate of 100 Mbps. It operates at industrial temperature grade (-40 to 85°C) and nominal voltage of 3.3V. The package style is flatpack, low profile, fine pitch, suitable for network interfaces in various applications.
100 Mbps
85 Cel
-40 Cel
LFQFP
FLATPACK, LOW PROFILE, FINE PITCH
1.6 mm
INDUSTRIAL
KS8001LI
Micrel
Micrel's KS8001LI is a 48-terminal Ethernet transceiver with 100 Mbps data rate. Operating at 3.3V, it has a temperature range of -40 to 85°C and uses CMOS technology. Ideal for network interfaces, this low-profile device is surface-mountable and features Gull Wing terminals.
e0
3
QFP48,.35SQ,20
240
Not Qualified
1.8 V
Tin/Lead (Sn85Pb15)
KSZ8051MLL
Micrel's KSZ8051MLL is a 48-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It features a low-profile flatpack package suitable for network interfaces, with a temperature range of 0-70°C. Ideal for commercial telecom applications due to its fine pitch and gull wing terminal form.
70 Cel
0 Cel
NOT SPECIFIED
1.2 V
COMMERCIAL
MC33FS6502CAER2
NXP Semiconductors
CAN FD/LIN TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Package Equivalence Code: LCC48,.32SQ,20;
S-PQCC-N48
HVQCCN
LCC48,.32SQ,20
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
AEC-Q100
CAN FD/LIN TRANSCEIVER
NO LEAD
40
MC33FS6523CAE
MC33FS6523CAE by NXP Semiconductors is a CAN FD/LIN transceiver with 48 terminals, AEC-Q100 screening, and operating temperature range of -40 to 125°C. It comes in a square chip carrier package suitable for network interfaces in automotive applications.
MC35FS4500NAE
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Screening Level: AEC-Q100;
150 Cel
HLFQFP
FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH
SMARTMOS
INTERFACE CIRCUIT
MC35FS4501CAE
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Length: 7 mm;
MC35FS4501NAE
MC35FS4502CAE
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; No. of Functions: 1;
MC35FS4502NAE
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Terminal Pitch: .5 mm;
MC35FS4503CAE
MC35FS4503CAE by NXP Semiconductors is a Network Interface with AEC-Q100 screening. It features 48 terminals in a square package, operating temperature range of -40 to 150°C, and Gull Wing terminal form. Ideal for telecom interface circuits due to its SMARTMOS technology and low profile design.
MC35FS4503NAE
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Maximum Time At Peak Reflow Temperature (s): 40;
KSZ8721SLI-TR
Microchip Technology
KSZ8721SLI-TR by Microchip offers 100 Mbps data rate, operates at -40 to 85°C, and has a 48-terminal GULL WING package. Ideal for Ethernet transceiver applications in industrial settings due to its CMOS technology and TS 16949 screening level.
R-PDSO-G48
e3
15.875 mm
SSOP
TSSOP48,.40
RECTANGULAR
SMALL OUTLINE, SHRINK PITCH
TS 16949
2.794 mm
2.5 V
MATTE TIN
.635 mm
DUAL
7.493 mm
MC34CM3120EPR2
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
S-XQCC-N48
5 mm
UNSPECIFIED
1 mm
5 V
KSZ9031RNXUA-TR
KSZ9031RNXUA-TR by Microchip Technology is a network interface IC with surface mount capability. It operates in an industrial temperature range of -40 to 85 °C and has a very thin profile package style. This Ethernet transceiver is suitable for telecom applications.
AEC-Q100; TS 16949
.9 mm
KSZ9031RNXUB-TRVAO
Microchip's KSZ9031RNXUB-TRVAO is an Ethernet transceiver with 1000 Mbps data rate, operating from -40 to 85 °C. It features a square chip carrier package with 48 terminals and matte tin finish. Ideal for industrial applications requiring reliable network interfaces in tight spaces.
1000 Mbps
LCC48,.27SQ,20
KSZ9031RNXUB-VAO
Microchip Technology's KSZ9031RNXUB-VAO is an Ethernet transceiver with 1000 Mbps data rate, AEC-Q100 screening level, and operates at -40 to 85°C. It has a square chip carrier package style suitable for industrial applications requiring reliable network interfaces.
KSZ9031RNXVA-TR
Microchip Technology's KSZ9031RNXVA-TR is an Ethernet transceiver with 48 terminals in a square chip carrier package. Operating temperature ranges from -40 to 105°C, suitable for industrial applications. It has a nominal voltage of 1.2V and meets AEC-Q100 and TS 16949 standards.
105 Cel
KSZ9031RNXVB-TRVAO
Microchip Technology's KSZ9031RNXVB-TRVAO is an Ethernet transceiver with 1000 Mbps data rate. It operates in industrial temperature range (-40 to 105 °C) and has AEC-Q100 screening level for automotive applications. The package style is chip carrier with very thin profile, suitable for surface mount assembly.
KSZ9031RNXVB-VAO
Microchip Technology's KSZ9031RNXVB-VAO is an Ethernet transceiver with a data rate of 1000 Mbps. It operates in industrial temperature range (-40 to 105 °C) and has 48 terminals in a square chip carrier package. Suitable for network interfaces, it features matte tin terminal finish and AEC-Q100 screening level.
KSZ8041MLLI
Microchip Technology's KSZ8041MLLI is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a low profile flatpack package with 48 terminals and matte tin finish. Ideal for industrial applications requiring reliable network interfaces in compact spaces.
S-XQFP-G48
58.3 mA
TLE92613QXV33XUMA1
Infineon Technologies
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Minimum Operating Temperature: -40 Cel;
.5 Mbps
6.5 mA
13.5 V
CAN FD TRANSCEIVER
TLE9261QXV33XUMA1
TLE9261QXV33XUMA1 by Infineon Technologies is a CAN FD transceiver with a data rate of 5 Mbps. It operates at a nominal voltage of 13.5 V and has a max operating temperature of 150°C. This network interface is commonly used in automotive applications for communication b/w electronic control units (ECUs).
5 Mbps
TLE92613BQXV33XUMA1
TLE92613BQXV33XUMA1 by Infineon is a CAN FD transceiver with 48 terminals in a square chip carrier package. It operates at -40 to 150°C, drawing a max of 6.5mA at 13.5V supply voltage, supporting data rates up to 5Mbps for automotive network interfaces.
TLE9261BQXXUMA1
TLE9261BQXXUMA1 by Infineon is a CAN FD transceiver with 48 terminals in a chip carrier package. It operates at temperatures from -40 to 150°C, drawing a max of 6.5mA at 13.5V supply voltage. Ideal for automotive network interfaces due to AEC-Q100 screening and 5Mbps data rate support.
TLE92603QXXUMA1
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Length: 7 mm;
2 Mbps
LCC48,.28SQ,20
TLE9261QXXUMA2
TLE9261QXXUMA2 by Infineon Technologies is a CAN FD transceiver with a data rate of 2 Mbps. It operates at temperatures ranging from -40 to 150 °C and has a max supply current of 6.5 mA. This network interface is commonly used in automotive applications for communication b/w electronic control units (ECUs).
MC35FS4500CAE
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Moisture Sensitivity Level (MSL): 3;
DP83848MPTBREP
DP83848MPTBREP by Texas Instruments is a Network Interface with 48 terminals, operating b/w -55 to 125°C. It features GULL WING terminal form, supports 100000 Mbps data rate for Ethernet transceiver applications in military-grade environments.
NICKEL PALLADIUM GOLD SILVER
DP83848MPTBEP
DP83848MPTBEP by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate. It operates at -55 to 125 °C, suitable for military-grade applications. The package is a square flatpack with 48 terminals, featuring GULL WING terminal form and 0.5 mm pitch.
BCM54811A2IMLG
Broadcom
ETHERNET TRANSCEIVER; Terminal Form: UNSPECIFIED; No. of Terminals: 48; Package Shape: UNSPECIFIED; No. of Functions: 1; Technology: CMOS;
TLE9271QXV33XUMA1
TLE9271QXV33XUMA1 by Infineon is a CAN FD transceiver with 48 terminals in a chip carrier package. It operates at -40 to 150°C, supports data rates up to 5 Mbps, and has a low supply current of 10 mA. Ideal for automotive applications requiring high-speed communication in harsh environments.
10 mA
TIN
TLE9272QXV33XUMA1
INTERFACE CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Moisture Sensitivity Level (MSL): 3;
TLE9271QXXUMA1
INTERFACE CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Package Body Material: PLASTIC/EPOXY;
KSZ8051MLLI-TR
Microchip Technology's KSZ8051MLLI-TR is an Ethernet transceiver IC with a data rate of 100 Mbps. It operates at temperatures ranging from -40 to 85°C, making it suitable for industrial applications. The package style is flatpack, low profile, fine pitch with a terminal pitch of 0.5 mm.
MC33FS6517CAE
CAN FD/LIN TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Length: 7 mm;
MC33FS6517LAER2
CAN FD/LIN TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; No. of Transceivers: 2;
2
MC33FS6517NAE
CAN FD/LIN TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Package Body Material: PLASTIC/EPOXY;
MC33FS6525CAE
CAN FD/LIN TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; No. of Transceivers: 1;
MC33FS6525CAER2
CAN FD/LIN TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Maximum Seated Height: 1.6 mm;
MC33FS6527CAE
CAN FD/LIN TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Technology: SMARTMOS;
MC33FS6527CAER2
CAN FD/LIN TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Terminal Pitch: .5 mm;
MC33FS6527NAER2
CAN FD/LIN TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Package Equivalence Code: QFP48,.35SQ,20;
MC33FS6528CAER2
CAN FD/LIN TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Surface Mount: YES;
MC33FS4507LAE
MC33FS4507LAE by NXP Semiconductors is a CAN FD/LIN transceiver with 2 transceivers. Operating temp range -40 to 125°C, it's AEC-Q100 compliant for automotive applications. Features include quad terminal position, SMARTMOS technology, and flatpack package style.
MC33FS4508CAER2
MC33FS4508CAER2 by NXP Semiconductors is a CAN FD/LIN transceiver with AEC-Q100 screening. Operating from -40 to 125°C, it features a flatpack package style, Gull Wing terminals, and SMARTMOS technology. Ideal for automotive applications requiring high-temperature resistance and reliable network interfaces.
MC33FS4508NAER2
CAN FD/LIN TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Width: 7 mm;
© 2023 All rights reserved
