Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
UC1846VTD1
Texas Instruments
The Texas Instruments UC1846VTD1 is a 16-terminal switching controller with current-mode control and pulse width modulation. Operating b/w 7-40 V, it supports a max switching frequency of 500 kHz in buck-boost configuration. Ideal for applications requiring precise voltage regulation in compact spaces.
SWITCHING CONTROLLER
CURRENT-MODE
PULSE WIDTH MODULATION
40 V
7 V
R-XUUC-N16
2.5146 mm
1
16
UNSPECIFIED
DIE
RECTANGULAR
UNCASED CHIP
NOT SPECIFIED
12 V
YES
BUCK-BOOST
500 kHz
NO LEAD
UPPER
2.413 mm
UC1846VTD2
The Texas Instruments UC1846VTD2 is a 16-terminal switching controller with a current-mode control mode and pulse width modulation technique. It operates at a max switching frequency of 500 kHz, supporting input voltages from 7V to 40V for buck-boost configurations. Ideal for applications requiring precise voltage regulation in compact designs.
AP65402SP-13
Diodes Incorporated
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
OUTPUT VOLTAGE RANGE FROM 0.8 V TO 12 V
SWITCHING REGULATOR
17 V
4.75 V
R-PDSO-G8
e3
4.9 mm
8
85 Cel
-40 Cel
PLASTIC/EPOXY
HLSOP
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
260
1.5 mm
BUCK
INDUSTRIAL
MATTE TIN
GULL WING
1.27 mm
DUAL
30
3.9 mm
TPS40007TDA2
TPS40007TDA2 by Texas Instruments is a VOLTAGE-MODE SWITCHING CONTROLLER with 15A output current, 300 kHz switching frequency, and BUCK switcher config. Ideal for applications requiring a compact RECTANGULAR UNCASED CHIP package with surface mount capability.
VOLTAGE-MODE
5.5 V
2.25 V
R-XUUC-N12
1.584 mm
12
15 A
4 V
.7 V
300 kHz
1.522 mm
TPS40007TDA3
TPS40007TDA3 by Texas Instruments is a voltage-mode switching controller with 12 terminals. It offers a max output current of 15A, operating at a frequency of up to 300 kHz. Ideal for applications requiring buck switcher configuration and input voltages ranging from 2.25V to 5.5V.
UC1825VTD1
UC1825VTD1 by Texas Instruments is a 21-terminal switching controller with current-mode control and pulse width modulation. It operates in buck-boost configuration at a max switching frequency of 1000 kHz, suitable for applications requiring a supply voltage range of 8.4-30 V such as power management systems.
ALSO OPERATES WITH VOLTAGE MODE CONTROL
30 V
8.4 V
R-XUUC-N21
3.1699 mm
21
Buck-Boost
1000 kHz
30k Rad(Si)
2.3444 mm
UC1825VTD2
The Texas Instruments UC1825VTD2 is a 21-terminal switching controller with a max switching frequency of 1000 kHz. Operating in current-mode control with pulse width modulation, it supports buck-boost configurations and has a supply voltage range from 8.4V to 30V. Ideal for applications requiring high-frequency power conversion in compact spaces.
UCC1800TD1
UCC1800TD1 by Texas Instruments is a current-mode switching controller with 11 terminals in a rectangular package. It operates using pulse width modulation control technique and BICMOS technology, with a compact size of 2.09mm x 1.81mm. Ideal for buck-boost switcher configurations in various applications requiring precise current control.
R-XUUC-N11
2.09 mm
11
BICMOS
1.81 mm
UCC1800TD2
UCC1800TD2 by Texas Instruments is a current-mode switching controller with 11 terminals in a rectangular unencased chip package. It utilizes pulse width modulation control technique for buck-boost switcher configuration. Ideal for compact applications requiring precise power regulation.
UCD9244MRGCTEP
UCD9244MRGCTEP by Texas Instruments is a 64-terminal switching controller with a 3.3V nominal voltage and BUCK switcher config. It operates b/w -55 to 125 °C, has a max switching frequency of 2 MHz, and is ideal for military-grade applications requiring precise power regulation in compact spaces.
3.6 V
3 V
3.3 V
S-PQCC-N64
e4
9 mm
3
4
64
125 Cel
-55 Cel
HVQCCN
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
1 mm
65 mA
2000 kHz
MILITARY
NICKEL PALLADIUM GOLD
.5 mm
QUAD
CSD87333Q3DT
CSD87333Q3DT by Texas Instruments is a switching controller with 8 terminals, operating temperature range of -55 to 150°C, and max output current of 15A. It is ideal for military applications requiring a compact design with a small outline package style and high switching frequency up to 1500 kHz.
24 V
S-PDSO-N8
3.3 mm
150 Cel
HTSON
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE
1.05 mm
1500 kHz
Matte Tin (Sn)
.65 mm
LV5769V-MPB-E
Onsemi
LV5769V-MPB-E by Onsemi is a current-mode switching controller with BUCK switcher config. It operates b/w -40 to 85 °C, suitable for industrial applications. With a small outline and low profile, it has 16 terminals in a rectangular package shape.
42 V
8.5 V
R-PDSO-G16
e6
5.2 mm
LSSOP
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
Tin/Bismuth (Sn/Bi)
4.4 mm
LV5769VZ-TLM-E
LV5769VZ-TLM-E by Onsemi is a 16-terminal switching controller with BICMOS technology. It operates b/w -40 to 85 °C, suitable for industrial applications. With a buck switcher config, it supports input voltage range of 8.5-42 V, making it ideal for current-mode control in various electronic devices.
TIN BISMUTH
NCP6925AFCT1G
NCP6925AFCT1G by Onsemi is a 36-terminal switching regulator with a max output current of 1.9A and max switching frequency of 3300 kHz. Ideal for industrial applications, it operates b/w -40 to 85 °C, with a control mode of current-mode PWM.
VOUT 0.6 TO 3.3V OUTPUT
2.5 V
S-PBGA-B36
2.36 mm
36
1.9 A
VFBGA
BGA36,6X6,16
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
3.6
Not Qualified
.6 mm
Power Management Circuits
3300 kHz
BALL
.4 mm
BOTTOM
NCV887700D1R2G
NCV887700D1R2G by Onsemi is a current-mode switching controller with boost switcher config. It has a max switching frequency of 501 kHz, min input voltage of 2V, and nominal output voltage of 6.8V. Ideal for applications requiring efficient power conversion in compact spaces.
2 V
6.8 V
SOP
SOP8,.25
SMALL OUTLINE
1.75 mm
Switching Regulator or Controllers
BOOST
501 kHz
NCV887740D1R2G
NCV887740D1R2G by Onsemi is a current-mode switching controller with boost switcher config. It has a max switching frequency of 501 kHz, min input voltage of 2V, and nominal output voltage of 12V. Ideal for applications requiring efficient power conversion in compact spaces.
NCP1076STCT3G
NCP1076STCT3G by Onsemi is a small outline switching controller with current-mode control. It operates b/w -40 to 125 °C, ideal for automotive applications. With a max switching frequency of 130 kHz and nominal input voltage of 8V, it offers efficient power management in compact designs.
8 V
R-PDSO-G4
6.5 mm
SOT-223
130 kHz
AUTOMOTIVE
2.3 mm
3.5 mm
NCP1219BD100R2G
NCP1219BD100R2G by Onsemi is a current-mode switching regulator with max. switching frequency of 107 kHz. It features small outline package style, matte tin terminal finish, and dual terminal position. Ideal for applications requiring efficient power management in compact electronic devices.
R-PDSO-G7
7
SOP7/8,.25
107 kHz
NCP5269BMNTWG
NCP5269BMNTWG by Onsemi is a voltage-mode switching controller with a 5V nominal input and 1V output voltage. It operates in buck configuration with a max switching frequency of 600kHz, suitable for industrial applications requiring precise voltage regulation in compact spaces. The chip carrier package style with matte tin finish and quad terminal position make it ideal for surface mount designs.
28 V
5 V
S-XQCC-N20
3 mm
20
100 Cel
1.5 V
.65 V
1 V
LCC20,.11SQ,16
5 mA
600 kHz
NCP5392PMNR2G
NCP5392PMNR2G by Onsemi is a voltage-mode switching controller with a max output current of 0.0005A and a max switching frequency of 1000kHz. It operates b/w 0-85 °C, ideal for applications requiring precise voltage regulation in compact spaces like consumer electronics or industrial automation systems.
5.25 V
S-XQCC-N40
6 mm
40
0 Cel
.0005 A
LCC40,.24SQ,20
PUSH-PULL
OTHER
TIN
NCP1599MNTWG
NCP1599MNTWG by Onsemi is a small outline switching regulator with 3A output current, 1130kHz max switching frequency, and PWM control technique. Ideal for industrial applications requiring a compact design and efficient power management in the temperature range of -40 to 85°C.
S-PDSO-N6
6
3 A
HVSON
SOLCC6,.12,38
1130 kHz
.95 mm
NCP3012DTBR2G
NCP3012DTBR2G by Onsemi is a voltage-mode switching controller with a min output voltage of 0.8V and max operating temperature of 125°C. Ideal for automotive applications, it has a single switcher configuration, operates at a max frequency of 88kHz, and supports input voltages ranging from 4.7V to 28V.
4.7 V
R-PDSO-G14
5 mm
14
.13 A
.8 V
TSSOP
TSSOP14,.25
1.2 mm
.012 mA
SINGLE
88 kHz
MOS
NCP3030ADR2G
NCP3030ADR2G by Onsemi is a VOLTAGE-MODE SWITCHING CONTROLLER with 8 terminals, operating from -40 to 125 °C. It has a max switching frequency of 1440 kHz and is ideal for automotive applications due to its small size and push-pull switcher configuration.
1440 kHz
NCP3102CMNTXG
NCP3102CMNTXG by Onsemi is a 40-terminal SQUARE CHIP CARRIER with VOLTAGE-MODE control mode, ideal for AUTOMOTIVE applications. It operates b/w -40 to 125 °C, supports BUCK switcher config, and has a max switching frequency of 317 kHz.
13.2 V
4.5 V
QCCN
CHIP CARRIER
317 kHz
NCP3170ADR2G
NCP3170ADR2G by Onsemi is a current-mode switching regulator with 3A output, 550kHz max frequency, and 85°C operating temp. Ideal for industrial applications requiring efficient power control in compact spaces.
18 V
550 kHz
CMOS
NCP3170BDR2G
NCP3170BDR2G by Onsemi is a current-mode switching regulator with a max output current of 3A and a max switching frequency of 1100 kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in compact spaces. With its buck switcher configuration and pulse width modulation control technique, this small outline IC is ideal for systems needing stable 3.3V output voltage from input sources ranging b/w 4.5V to 18V.
1100 kHz
NCV8881PWR2G
NCV8881PWR2G by Onsemi is a switching regulator with 16 terminals, VOLTAGE-MODE control mode, and BUCK switcher config. It operates at a max frequency of 600 kHz and supports a max output current of 3 A. Ideal for applications requiring efficient power conversion in compact spaces.
19 V
9 V
10.3 mm
HSOP
SOP16,.4
13.2
2.65 mm
7.5 mm
NCV3163MNR2G
NCV3163MNR2G by Onsemi is a voltage-mode switching regulator with a max output current of 3.4A and a max switching frequency of 300kHz. Ideal for automotive applications, it operates b/w -40 to 125 °C temperatures and supports input voltages ranging from 2.5V to 40V.
15 V
R-XDSO-N18
18
3.4 A
SOLCC18,.2,20
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
NCV8851DBG
NCV8851DBG by Onsemi is a switching controller with current-mode control technique. It operates in automotive temperature grade range from -40 to 125 °C, suitable for various automotive applications. With a max output current of 0.12A and a peak switching frequency of 575kHz, it offers efficient power management in a small outline package.
20 V
R-PDSO-G20
.12 A
6 V
TSSOP20,.25
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
575 kHz
A4490EES-T
Allegro MicroSystems
A4490EES-T by Allegro MicroSystems is a 20-terminal switching regulator with a max output current of 2A and a control mode of current-mode. It operates b/w -40 to 85°C, making it suitable for industrial applications requiring precise power regulation at frequencies up to 630kHz. The chip carrier package style with a very thin profile enables surface mount installation in space-constrained environments.
34 V
4 mm
2 A
.8 mm
630 kHz
PM6670AS
STMicroelectronics
PM6670AS by STMicroelectronics is a compact switching regulator designed for automotive applications, featuring a voltage-mode control technique and supporting input voltages from 4.5V to 36V. It operates efficiently at temperatures b/w -40 °C and 125°C, delivering up to 3A output current. With its thin profile and quad terminal design, it’s ideal for space-constrained environments.
36 V
S-XQCC-N24
24
LCC24,.16SQ,20
UCC2895QDWRQ1
UCC2895QDWRQ1 by Texas Instruments is a switching controller with a 12V nominal input voltage and 5V output voltage. It operates in automotive-grade temperatures from -40 to 125°C, featuring a max switching frequency of 1000 kHz. With AEC-Q100 screening, it's ideal for automotive applications requiring high efficiency and precise current-mode control.
PEAK/AVERAGE CURRENT MODE ALSO POSSIBLE
16.5 V
12.8 mm
2
.02 A
5.06 V
4.94 V
SOP20,.4
AEC-Q100
6 mA
10 V
PHASE-SHIFT
REG71050DRVT
REG71050DRVT by Texas Instruments is a small outline, heat sink package with a very thin profile. It operates in industrial temperatures (-40 to 85°C) and has a max output current of 0.06A. Ideal for applications requiring a min output voltage of 5V, such as switched capacitor regulators.
SWITCHED CAPACITOR REGULATOR
2.7 V
3.25 V
2 mm
.06 A
SOLCC6,.08,25
Other Analog ICs
DOUBLER INVERTER
AP1530SDPG-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 18V
-20 Cel
1.63 mm
360 kHz
AP1530SG-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP1512-12K5L-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3;
60 V
R-PSSO-G5
10.16 mm
5
5.5 A
SMSIP5H,.6,67TB
4.85 mm
60 kHz
1.71 mm
9.15 mm
AP1512-12K5L-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: 1.71 mm;
AP1512-33K5L-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: SMSIP5H,.6,67TB;
AP1512-33K5L-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: 5.5 A;
AP1512-50K5L-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Qualification: Not Qualified;
AP1512-50K5L-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Control Mode: VOLTAGE-MODE;
AP1512A-12K5L-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: 6 A;
6 A
AP1512A-12K5L-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Nominal Input Voltage: 30 V;
AP1512A-33K5L-13
AP1512A-33K5L-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Length: 10.16 mm;
AP1512A-50K5L-13
AP1512A-50K5L-U
UCC28221DG4
UCC28221DG4 by Texas Instruments is a current-mode dual switching controller with BICMOS technology. It operates at 2000 kHz max switching frequency, suitable for industrial applications. With a 12V nominal input/output voltage range and compact design (9.9mm x 3.9mm), it's ideal for small outline surface-mount designs.
DUAL SWITCHING CONTROLLER
14.5 V
9.9 mm
105 Cel
.01 A
3.45 V
3.15 V
SOP16,.25
© 2023 All rights reserved
