Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP3170BDR2G by Onsemi is a current-mode switching regulator with a max output current of 3A and a max switching frequency of 1100 kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in compact spaces. With its buck switcher configuration and pulse width modulation control technique, this small outline IC is ideal for systems needing stable 3.3V output voltage from input sources ranging b/w 4.5V to 18V.
Median Price
$0.547
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$0.514
1k+ parts
$0.465
10k+ parts
-
Digiode
$0.520
Nova Conductors
$1.113
Bristol Electronics
$1.875
Flip Electronics
Chip Stock
Vyrian
Diverse Electronics
Sensible Micro Corp
Microfarads
Ampacity Inc.
Semicontronic
$0.453
$0.451
Corphita
$0.492
Corohmni
Continental Prestige Electronics
$0.743
$0.728
Argo Parts USA
Aranea Global
$1.091
$1.047
Advanced Electronics
$1.277
$1.213
Vigor
$1.310
AZTECH Wire
$7.681
Aztec Data Supply Inc.
$20.210
Perfect Parts
Lixinc
Kepictronics
A-Z Elektronik GmbH
SupplyDigital Components
Problanco Electronics
Authorized Procurement Solutions
Assy Fe
UHIMA Technologies
TANS Electronics
Microchip USA
Kulean Microsystems
Futuretech Components
Robosynatics
Lucentia Tech
$0.056
iodParts Technologies Inc.
The plastic/epoxy material used for the package body is lightweight and durable, making this product easy to handle and resistant to damage during handling and installation.
Being surface mount compatible allows for easy and reliable PCB assembly, saving space and reducing the overall size of the final product.
With a high maximum operating temperature of 85°C, this product ensures reliability and stable performance even in challenging environmental conditions.
Current-mode control technique ensures precise regulation of output current, improving efficiency and response to load variations.
The nominal input voltage of 12V allows compatibility with a wide range of power sources, making it versatile for various applications.
With a maximum output current of 3A, this switching regulator can power multiple components or devices, making it suitable for applications requiring higher power output.
Pulse width modulation control technique offers precise and efficient regulation of output voltage, contributing to overall system stability and performance.
Buck configuration allows for step-down voltage regulation, making this product energy efficient and suitable for applications where lower voltage output is required.
Switching Regulators & Controllers NCP3170BDR2G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCP3170BDR2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 01/Oct/2021
PCN Assembly/Origin - NCP3170 13/Aug/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
SPC TECHNOLOGY/ MULTICOMP
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Rugao Dachang Electronic
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
Changzhou Starsea Electronics
Bytesonic Electronics
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
Sensitron Semiconductor
LM2675M-12
Texas Instruments
LM2675M-12 by Texas Instruments is a voltage-mode switching regulator with 1A output current and 260kHz max switching frequency. Ideal for automotive applications, it operates b/w -40 to 125°C, with a wide input range of 6.5V to 40V and an output voltage of 12V.
TPS54340DDAR
TPS54340DDAR by Texas Instruments is a switching regulator with 3.5A output current, 41V max output voltage, and 2500kHz max switching frequency. Ideal for automotive applications due to its low profile design and wide temperature range (-40 to 125°C).
LMR16006XDDCT
LMR16006XDDCT by Texas Instruments is a switching regulator with a max output voltage of 55V and max output current of 0.6A, suitable for automotive applications. It operates in buck configuration with pulse width modulation control technique, offering a wide input voltage range from 4V to 60V and high switching frequency up to 2100 kHz.
TPS63001DRCRG4
TPS63001DRCRG4 by Texas Instruments is a switching regulator with a max output current of 2A and max operating temp of 85°C. Ideal for industrial applications, it operates in buck-boost configuration with a control mode of current-mode PWM. With a small outline package style, it offers a min output voltage of 3.3V.
LM5008MMX/NOPB
LM5008MMX/NOPB by Texas Instruments is a switching regulator with a max output voltage of 75V and max output current of 0.61A. Ideal for automotive applications, it operates b/w -40 to 125°C, featuring hysteric current mode control technique and buck switcher configuration.
TPS62160DSGR
TPS62160DSGR by Texas Instruments is a switching regulator with a max output current of 2.45A and max output voltage of 6V. It operates in industrial temperature range, ideal for applications requiring high efficiency power conversion in compact spaces. With a small outline package style and very thin profile, it's suitable for various electronic devices needing precise voltage regulation.
LMZ14201HTZE/NOPB
LMZ14201HTZE/NOPB by Texas Instruments is a switching regulator with 1A output current, 5-24V output voltage range, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. Suitable for various power management needs in automotive systems.
SG3525AN
Motorola
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS5420DRG4
TPS5420DRG4 by Texas Instruments is a switching regulator with 2A output current, 500kHz max switching frequency, and 1.23V min output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact small outline package design.
PLMR36520ADDAR
Texas Instruments PLMR36520ADDAR is a switching regulator with 2A output current, 400kHz switching frequency, and -40 to 125°C operating temperature range. Ideal for automotive applications due to its small outline package style and pulse frequency modulation control technique.
UCC28089DR
UCC28089DR by Texas Instruments is a switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in industrial temperature grade range from -40 to 105°C, making it suitable for various power management applications. The IC features pulse width modulation control technique and push-pull switcher configuration for efficient power conversion.
TPS62160DGKT
TPS62160DGKT by Texas Instruments is a switching regulator with a max output current of 1A and a max switching frequency of 2250 kHz. It operates in buck configuration, supports input voltages from 3V to 17V, and has a min output voltage of 0.9V. This IC is ideal for industrial applications requiring efficient power management in compact spaces.
LMZ23605TZX/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3; Maximum Output Current: 5 A; Maximum Switching Frequency: 914 kHz;
LTC1144IS8#PBF
Linear Technology
SWITCHED CAPACITOR CONVERTER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ14201HTZ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Qualification: Not Qualified; Terminal Finish: MATTE TIN; Terminal Position: SINGLE;
TPS55340PWPR
TPS55340PWPR by Texas Instruments is a switching regulator with 14 terminals, operating b/w -40 to 150°C. It offers a min output voltage of 3V and max output current of 7.75A, suitable for automotive applications due to its compact size and pulse width modulation control technique.
MC34063ACN
Analog Integrations
Switching Regulator or Controllers; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
UC2825DW
UC2825DW by Texas Instruments is a current-mode switching controller with a 2A output current and 1000 kHz max switching frequency. Ideal for industrial applications, it operates b/w -40 to 85°C, with a nominal input voltage of 15V and min supply voltage of 9.2V. The package style is small outline, making it suitable for compact designs.
TPS54060DGQ
TPS54060DGQ by Texas Instruments is a switching regulator with a max output current of 0.5A and max input voltage of 60V, suitable for automotive applications. It operates in current-mode control with a PWM technique, offering a wide temperature range from -40 to 150°C. The compact square package style makes it ideal for space-constrained designs.
PTN78060WAD
PTN78060WAD by Texas Instruments is a switching regulator with 7 terminals, operating b/w -40 to 85°C. It offers an output voltage range of 2.5V to 12.6V and can handle up to 3A output current at a max frequency of 660kHz. Ideal for industrial applications requiring efficient buck switching regulators in compact microelectronic assemblies.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP3063BDR2G
Onsemi
NCP3063BDR2G by Onsemi is a switching regulator with 1.5A output current, 190kHz max switching frequency, and -40 to 125°C operating temp range. Ideal for automotive applications due to its buck-boost switcher config and hysteric current mode control technique.
NCP3170ADR2G
NCP3170ADR2G by Onsemi is a current-mode switching regulator with 3A output, 550kHz max frequency, and 85°C operating temp. Ideal for industrial applications requiring efficient power control in compact spaces.
NCP3063BMNTXG
NCP3063BMNTXG by Onsemi is a current-mode switching regulator with 1.5A output, operating from -40 to 125°C. Ideal for automotive applications, it supports input voltage range of 5-40V and offers hysteric control at 190kHz frequency in a small outline package.
NCP3063DR2G
NCP3063DR2G by Onsemi is a switching regulator with 1.5A output current, 190kHz max switching frequency, and buck-boost configuration. Ideal for commercial applications requiring precise current-mode control in a compact SMD package. Operates b/w 0 to 70°C temperature range with input voltage from 5V to 40V.
NCP3063MNTXG
NCP3063MNTXG by Onsemi is a switching regulator with 1.5A output current, 190kHz max frequency, and buck-boost configuration. Ideal for commercial applications requiring precise current-mode control in a compact package with surface mount capability.
NCP3064MNTXG
NCP3064MNTXG by Onsemi is a current-mode switching regulator with 1.5A output, 190kHz switching frequency, and 3-40V input range. Ideal for buck-boost applications in commercial-grade electronics due to its small outline package and dual terminal position.
NCP3064BMNTXG
NCP3064BMNTXG by Onsemi is a current-mode switching regulator with 1.5A output, 190kHz switching frequency, and -40 to 125°C operating temperature range. Ideal for automotive applications due to its buck-boost configuration and wide input voltage range of 3-40V.
NCP3064BDR2G
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP3064DR2G
NCP3064DR2G by Onsemi is a switching regulator with 1.5A output current, 190kHz switching frequency, and buck-boost configuration. It operates b/w 3V to 40V input voltage range, ideal for commercial applications requiring efficient power management in compact spaces.
NCP3232NMNTXG
NCP3232NMNTXG by Onsemi is a 40-terminal switching controller with a max output current of 15A and a control technique of pulse width modulation. It operates b/w -40 to 85°C, making it suitable for industrial applications requiring precise voltage-mode control up to 500 kHz switching frequency.
NCP3163BPWR2G
NCP3163BPWR2G by Onsemi is a 16-terminal switching regulator with voltage-mode control, operating b/w -40 to 85°C. It supports a max output current of 3.4A and has a buck-boost switcher configuration with a max switching frequency of 300kHz. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
NCP3163BPWG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP3231MNTXG
NCP3231MNTXG by Onsemi is a 40-terminal switching regulator with max output current of 25A and max switching frequency of 500kHz. Ideal for industrial applications, it operates b/w -40 to 85°C, using voltage-mode control technique in a square package style.
NCP3063PG
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NCP3063BPG
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NCP3230MNTXG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCP3163BMNR2G
NCP3163BMNR2G by Onsemi is a VOLTAGE-MODE switching regulator with 3.4A output current, 300kHz max frequency, and BUCK-BOOST configuration. Ideal for industrial applications requiring efficient power management in a compact SMALL OUTLINE package with surface mount capability.
NCP3012DTBR2G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP3020ADR2G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved