Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP3020ADR2G by Onsemi is a voltage-mode switching controller with a max operating temperature of 125°C. It has a push-pull switcher config and operates at a max frequency of 360 kHz. Ideal for automotive applications due to its small outline package and wide input voltage range from 4.7V to 28V.
Median Price
$0.581
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.427
100+ parts
$0.232
1k+ parts
$0.181
10k+ parts
$0.317
Arrow
$0.585
$0.450
$0.408
$0.396
Mouser Electronics
$1.140
$0.580
$0.460
$0.412
Flip Electronics (Authorized)
-
Verical
$0.518
Rochester
$0.560
$0.465
$0.415
Digiode
$0.390
Vyrian
$0.399
Flip Electronics
Chip Stock
Nova Conductors
Ampacity Inc.
$0.339
Semicontronic
$0.354
$0.345
$0.343
Corphita
$0.369
Corohmni
Vigor
$1.150
Authorized Procurement Solutions
Lixinc
Kepictronics
SupplyDigital Components
Continental Prestige Electronics
Perfect Parts
Problanco Electronics
Robosynatics
Lucentia Tech
$0.514
$0.504
Aranea Global
TANS Electronics
Assy Fe
Kulean Microsystems
Futuretech Components
UHIMA Technologies
Argo Parts USA
GreenTree Electronics
Plastic/Epoxy material is lightweight and cost-effective, making the product suitable for portable and cost-sensitive applications.
Surface mount technology allows for easy and efficient PCB assembly, making the product suitable for automated mass production.
High maximum operating temperature ensures reliable performance even in harsh environmental conditions.
Voltage-mode control provides precise regulation of output voltage, making the product suitable for applications requiring stable power supply.
Specific nominal input voltage simplifies design and compatibility with systems using a 12V power source.
Automotive-grade temperature rating indicates the product is suitable for use in automotive electronics applications where temperature extremes are common.
High switching frequency allows for efficient power conversion and smaller components, making the product suitable for space-constrained designs.
Low minimum input voltage ensures compatibility with a wide range of power sources, making the product versatile in different applications.
High maximum input voltage allows for flexibility in the choice of power sources, making the product suitable for a variety of industrial and automotive applications.
Switching Regulators & Controllers NCP3020ADR2G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCP3020ADR2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
FDLL4148
Fairchild Semiconductor
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Kec
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
LMZ23603TZE/NOPB
LMZ23603TZE/NOPB by Texas Instruments is a switching regulator with 3A output current, 950kHz max switching frequency, and 6V max output voltage. Ideal for industrial applications requiring a compact design and efficient power management in temperature-sensitive environments.
TPS63020DSJT
TPS63020DSJT by Texas Instruments is a switching regulator with 14 terminals, operating temperature range of -40 to 85°C, and output current up to 4.5A. Ideal for industrial applications requiring a compact design, it supports input voltages from 1.8V to 5.5V and offers pulse width modulation control for efficient power management at frequencies up to 2600kHz.
LM2596SX-ADJ
LM2596SX-ADJ by Texas Instruments is a switching regulator with 5 terminals, offering a max output current of 3A and a wide input voltage range from 4.5V to 40V. Operating in voltage-mode control, it provides an adjustable output voltage ranging from 1.235V to 37V, making it suitable for automotive applications due to its high temperature grade of up to 125°C.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS61170QDRVRQ1
TPS61170QDRVRQ1 by Texas Instruments is a switching regulator with 1.44A output current, operating b/w -40 to 125°C. It features a buck-boost switcher config, PWM control mode, and supports input voltages from 3V to 18V. Ideal for automotive applications due to AEC-Q100 screening level and compact design with small outline package style.
PTN78000WAH
PTN78000WAH by Texas Instruments is a switching regulator with a max output current of 3.2 A and a nominal output voltage of 5 V. It is commonly used in industrial applications that require pulse width modulation control and operate within a temperature range of -40 to 85 °C.
LM2672M-12/NOPB
SG3525AN
Linear Technology
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM43603PWPR
LM43603PWPR by Texas Instruments is a switching regulator with 16 terminals, operating temperature range of -40 to 125°C, and output current up to 3A. Ideal for automotive applications, it offers a wide input voltage range from 3.5V to 36V and supports pulse width modulation control technique at a max switching frequency of 2200 kHz.
LMZ14202HTZE/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30;
LMR36520ADDAR
LMR36520ADDAR by Texas Instruments is a switching regulator with 24V nominal input/output voltage, 2A max output current, and 460kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design in a small outline package.
LM51551DSSR
LM51551DSSR by Texas Instruments is a switching regulator with a max operating temperature of 125°C and a min output voltage of 1.5V. It is commonly used in automotive applications due to its small outline, heat sink profile and high switching frequency of 2200 kHz.
LM2594M-5.0
LM2594M-5.0 by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V, suitable for automotive applications. Operating b/w -40°C to 125°C, it has a control technique of pulse width modulation and a buck switcher configuration, making it ideal for various power supply designs in compact spaces.
Microsemi
LMZ14203HTZE/NOPB
LMZ14203HTZE/NOPB by Texas Instruments is a switching regulator with 3A output current, 5-24V output voltage range, and 6-42V input voltage range. It operates in voltage-mode control with a max switching frequency of 1MHz. Ideal for automotive applications due to its -40 to 125°C temperature grade and small outline package style.
LM2676S-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ14203HTZX/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Maximum Switching Frequency: 1000 kHz; Terminal Finish: MATTE TIN; Maximum Output Current: 3 A;
TPS62410DRCR
TPS62410DRCR by Texas Instruments is a dual switching controller with a max output current of 0.8A and a max switching frequency of 2500kHz. It operates in voltage-mode control technique, suitable for industrial applications requiring precise power regulation in compact spaces.
LMZ14202TZ-ADJ/NOPB
LMZ14202TZ-ADJ/NOPB by Texas Instruments is a switching regulator with 2A output current, 6V max output voltage, and 1000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design.
LM2675M-12/NOPB
LM2675M-12/NOPB by Texas Instruments is a switching regulator with a max output current of 1A and a max output voltage of 37V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTC1771IS8#TRPBF
NCP3063BDR2G
Onsemi
NCP3063BDR2G by Onsemi is a switching regulator with 1.5A output current, 190kHz max switching frequency, and -40 to 125°C operating temp range. Ideal for automotive applications due to its buck-boost switcher config and hysteric current mode control technique.
NCP3170ADR2G
NCP3170ADR2G by Onsemi is a current-mode switching regulator with 3A output, 550kHz max frequency, and 85°C operating temp. Ideal for industrial applications requiring efficient power control in compact spaces.
NCP3063BMNTXG
NCP3063BMNTXG by Onsemi is a current-mode switching regulator with 1.5A output, operating from -40 to 125°C. Ideal for automotive applications, it supports input voltage range of 5-40V and offers hysteric control at 190kHz frequency in a small outline package.
NCP3063DR2G
NCP3063DR2G by Onsemi is a switching regulator with 1.5A output current, 190kHz max switching frequency, and buck-boost configuration. Ideal for commercial applications requiring precise current-mode control in a compact SMD package. Operates b/w 0 to 70°C temperature range with input voltage from 5V to 40V.
NCP3170BDR2G
NCP3170BDR2G by Onsemi is a current-mode switching regulator with a max output current of 3A and a max switching frequency of 1100 kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in compact spaces. With its buck switcher configuration and pulse width modulation control technique, this small outline IC is ideal for systems needing stable 3.3V output voltage from input sources ranging b/w 4.5V to 18V.
NCP3063MNTXG
NCP3063MNTXG by Onsemi is a switching regulator with 1.5A output current, 190kHz max frequency, and buck-boost configuration. Ideal for commercial applications requiring precise current-mode control in a compact package with surface mount capability.
NCP3064MNTXG
NCP3064MNTXG by Onsemi is a current-mode switching regulator with 1.5A output, 190kHz switching frequency, and 3-40V input range. Ideal for buck-boost applications in commercial-grade electronics due to its small outline package and dual terminal position.
NCP3064BMNTXG
NCP3064BMNTXG by Onsemi is a current-mode switching regulator with 1.5A output, 190kHz switching frequency, and -40 to 125°C operating temperature range. Ideal for automotive applications due to its buck-boost configuration and wide input voltage range of 3-40V.
NCP3064BDR2G
NCP3064DR2G
NCP3064DR2G by Onsemi is a switching regulator with 1.5A output current, 190kHz switching frequency, and buck-boost configuration. It operates b/w 3V to 40V input voltage range, ideal for commercial applications requiring efficient power management in compact spaces.
NCP3232NMNTXG
NCP3232NMNTXG by Onsemi is a 40-terminal switching controller with a max output current of 15A and a control technique of pulse width modulation. It operates b/w -40 to 85°C, making it suitable for industrial applications requiring precise voltage-mode control up to 500 kHz switching frequency.
NCP3163BPWR2G
NCP3163BPWR2G by Onsemi is a 16-terminal switching regulator with voltage-mode control, operating b/w -40 to 85°C. It supports a max output current of 3.4A and has a buck-boost switcher configuration with a max switching frequency of 300kHz. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
NCP3163BPWG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP3231MNTXG
NCP3231MNTXG by Onsemi is a 40-terminal switching regulator with max output current of 25A and max switching frequency of 500kHz. Ideal for industrial applications, it operates b/w -40 to 85°C, using voltage-mode control technique in a square package style.
NCP3063PG
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NCP3063BPG
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NCP3230MNTXG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCP3163BMNR2G
NCP3163BMNR2G by Onsemi is a VOLTAGE-MODE switching regulator with 3.4A output current, 300kHz max frequency, and BUCK-BOOST configuration. Ideal for industrial applications requiring efficient power management in a compact SMALL OUTLINE package with surface mount capability.
NCP3012DTBR2G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved