Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP3064BMNTXG by Onsemi is a current-mode switching regulator with 1.5A output, 190kHz switching frequency, and -40 to 125°C operating temperature range. Ideal for automotive applications due to its buck-boost configuration and wide input voltage range of 3-40V.
Median Price
$1.840
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Farnell
1+ parts
$1.010
100+ parts
$0.909
1k+ parts
$0.759
10k+ parts
$0.745
Mouser Electronics
$1.660
$1.100
$0.988
$0.821
DigiKey
$1.093
$0.987
-
Element14
$2.730
$1.630
$1.210
$1.180
Chip1Stop
$5.980
Nova Conductors
$0.791
Digiode
$1.444
Component Electronics Inc.
$3.850
$2.880
$2.500
Vyrian
Chip Stock
Cyclops Electronics Ltd
Ampacity Inc.
$0.690
Semicontronic
$0.740
$0.722
$0.718
Corohmni
$0.776
Continental Prestige Electronics
Argo Parts USA
Corphita
$1.368
Advanced Electronics
$2.947
$2.799
Aztec Data Supply Inc.
$19.330
RC Electronics
Perfect Parts
Futuretech Components
TANS Electronics
Kepictronics
Assy Fe
SupplyDigital Components
Problanco Electronics
Lixinc
Kulean Microsystems
UHIMA Technologies
Authorized Procurement Solutions
iodParts Technologies Inc.
GreenTree Electronics
Surface mount design allows for easy and efficient PCB assembly, making this product suitable for high-volume production.
Square package shape provides a good balance between space efficiency and ease of mounting on the PCB.
8 terminals offer flexibility in connection options and allow for versatile circuit design.
High maximum operating temperature ensures reliability and performance in demanding environments.
Current-mode control provides better transient response and stability, enhancing overall efficiency and performance.
Wide operating temperature range allows for operation in extreme conditions, making this product suitable for a variety of applications.
Nominal input voltage of 5 V makes this switching regulator compatible with a wide range of power sources.
High maximum output current allows for powering of a variety of loads, making this product versatile and suitable for various applications.
Switching Regulators & Controllers NCP3064BMNTXG attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCP3064BMNTXG Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - DFN/QFN 19/Aug/2016 DFN/QFN Device Lead Finish/BOM Change 27/Apr/2016
PCN Packaging - Covering Tape/Material Chg 20/May/2016
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Wuxi Xuyang Electronic
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
NXP Semiconductors
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
Diotec Semiconductor Ag
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
Shenzhen Yixinsemi Electronics
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
LMR54406FDBVR
LMR54406FDBVR by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125 °C. It has a max output voltage of 28 V and current of 0.6 A, suitable for applications requiring a compact design and efficient power management in various electronic devices.
LMZ14203HTZ
LMZ14203HTZ by Texas Instruments is a voltage-mode switching regulator with 3A output current, ideal for automotive applications. It operates b/w -40°C to 125°C, accepting input voltages from 6V to 72V and providing a stable 12V output. This small outline package with gull wing terminals is surface mountable and designed for efficient power management in compact spaces.
LTC1144IS8#PBF
Linear Technology
SWITCHED CAPACITOR CONVERTER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ22005TZE/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Terminal Pitch: 1.27 mm; Terminal Finish: MATTE TIN; Qualification: Not Qualified;
TPS63070RNMR
TPS63070RNMR by Texas Instruments is a 15-terminal switching regulator with a max output current of 2A and a control technique of pulse width modulation. It operates b/w -40 to 125°C, making it suitable for automotive applications requiring efficient power management in compact spaces. With a buck-boost switcher config and max switching frequency of 2800 kHz, it offers reliable performance in various electronic systems.
TPS5410DR
TPS5410DR by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max input voltage of 36V. It operates in buck configuration with pulse width modulation control technique, suitable for automotive applications due to its temperature grade. The package style is small outline, making it ideal for space-constrained designs.
LM2576HVT-ADJLF03/NOPB
Texas Instruments' LM2576HVT-ADJLF03/NOPB is a 5-terminal switching regulator with max output current of 3A, operating b/w -40 to 125°C. Ideal for automotive applications, it supports input voltage range from 8V to 60V and offers a max switching frequency of 63kHz in a flange mount package.
LM2594M-ADJ/NOPB
LM2594M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V. It operates in the automotive temperature grade range (-40 to 125°C) and is ideal for applications requiring pulse width modulation control, such as buck converter circuits.
LM22672MRE-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 40;
LMZ10501SILT
LMZ10501SILT by Texas Instruments is a switching regulator with 1A output current, 3.6V max output voltage, and 2250kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with small outline package style.
LT8641EUDC#TRPBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 18; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2672M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS82085SILR
TPS82085SILR by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output current up to 3A. Ideal for automotive applications, it offers a max output voltage of 6V and switching frequency of 2800 kHz.
LM5116MH/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS62110RSARG4
TPS62110RSARG4 by Texas Instruments is a 16-terminal switching regulator with VOLTAGE-MODE control, operating b/w -40 to 85°C. It offers a max output voltage of 16V and current of 1.5A, suitable for industrial applications requiring efficient power management in compact spaces.
LM5017SDX/NOPB
LM5017SDX/NOPB by Texas Instruments is a switching regulator with max output voltage of 90V, max output current of 0.6A, and max switching frequency of 1MHz. Ideal for automotive applications due to its temp grade and small outline package style.
IR1155STRPBF
Infineon Technologies
IR1155STRPBF by Infineon is a current-mode power factor controller with boost switcher config. Operating at 200 kHz, it has a nominal voltage of 15 V and max input voltage of 19 V. This small outline IC is ideal for switching regulators & controllers in applications requiring efficient power supplies.
TPS61070DDCRG4
TPS61070DDCRG4 by Texas Instruments is a voltage-mode boost switching regulator with a max output current of 0.7A and a max switching frequency of 1440kHz. It operates in industrial temperature grade range (-40 to 85°C) and is ideal for battery charge controller applications due to its small outline, very thin profile package style.
LTC3350EUHF#PBF
SWITCHED CAPACITOR CONVERTER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
LM3150MHX/NOPB
LM3150MHX/NOPB by Texas Instruments is a switching regulator with 14 terminals, operating at -40 to 125°C. It offers a max output voltage of 40V and current up to 12A, suitable for automotive applications. With hysteric current mode control technique and push-pull configuration, it supports input voltages from 6-42V and has a compact design with small outline package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP3063BDR2G
NCP3063BDR2G by Onsemi is a switching regulator with 1.5A output current, 190kHz max switching frequency, and -40 to 125°C operating temp range. Ideal for automotive applications due to its buck-boost switcher config and hysteric current mode control technique.
NCP3170ADR2G
NCP3170ADR2G by Onsemi is a current-mode switching regulator with 3A output, 550kHz max frequency, and 85°C operating temp. Ideal for industrial applications requiring efficient power control in compact spaces.
NCP3063BMNTXG
NCP3063BMNTXG by Onsemi is a current-mode switching regulator with 1.5A output, operating from -40 to 125°C. Ideal for automotive applications, it supports input voltage range of 5-40V and offers hysteric control at 190kHz frequency in a small outline package.
NCP3063DR2G
NCP3063DR2G by Onsemi is a switching regulator with 1.5A output current, 190kHz max switching frequency, and buck-boost configuration. Ideal for commercial applications requiring precise current-mode control in a compact SMD package. Operates b/w 0 to 70°C temperature range with input voltage from 5V to 40V.
NCP3170BDR2G
NCP3170BDR2G by Onsemi is a current-mode switching regulator with a max output current of 3A and a max switching frequency of 1100 kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in compact spaces. With its buck switcher configuration and pulse width modulation control technique, this small outline IC is ideal for systems needing stable 3.3V output voltage from input sources ranging b/w 4.5V to 18V.
NCP3063MNTXG
NCP3063MNTXG by Onsemi is a switching regulator with 1.5A output current, 190kHz max frequency, and buck-boost configuration. Ideal for commercial applications requiring precise current-mode control in a compact package with surface mount capability.
NCP3064MNTXG
NCP3064MNTXG by Onsemi is a current-mode switching regulator with 1.5A output, 190kHz switching frequency, and 3-40V input range. Ideal for buck-boost applications in commercial-grade electronics due to its small outline package and dual terminal position.
NCP3064BDR2G
NCP3064DR2G
NCP3064DR2G by Onsemi is a switching regulator with 1.5A output current, 190kHz switching frequency, and buck-boost configuration. It operates b/w 3V to 40V input voltage range, ideal for commercial applications requiring efficient power management in compact spaces.
NCP3232NMNTXG
NCP3232NMNTXG by Onsemi is a 40-terminal switching controller with a max output current of 15A and a control technique of pulse width modulation. It operates b/w -40 to 85°C, making it suitable for industrial applications requiring precise voltage-mode control up to 500 kHz switching frequency.
NCP3163BPWR2G
NCP3163BPWR2G by Onsemi is a 16-terminal switching regulator with voltage-mode control, operating b/w -40 to 85°C. It supports a max output current of 3.4A and has a buck-boost switcher configuration with a max switching frequency of 300kHz. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
NCP3163BPWG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP3231MNTXG
NCP3231MNTXG by Onsemi is a 40-terminal switching regulator with max output current of 25A and max switching frequency of 500kHz. Ideal for industrial applications, it operates b/w -40 to 85°C, using voltage-mode control technique in a square package style.
NCP3063PG
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NCP3063BPG
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NCP3230MNTXG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCP3163BMNR2G
NCP3163BMNR2G by Onsemi is a VOLTAGE-MODE switching regulator with 3.4A output current, 300kHz max frequency, and BUCK-BOOST configuration. Ideal for industrial applications requiring efficient power management in a compact SMALL OUTLINE package with surface mount capability.
NCP3012DTBR2G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP3020ADR2G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved