Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: SMSIP5H,.6,67TB;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Native Components
$15.295
Northwest PG Solutions
$16.825
$15.143
AZTECH Wire
$19.970
Advanced Electronics
$21.743
$19.786
$17.829
Microchip USA
Switching Regulators & Controllers AP1512A-50K5L-U attributes and parameters. Explore more Switching Regulators & Controllers devices from Diodes Incorporated
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
AP1512A-50K5L-U Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Analog/Discrete 10/June/2010
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
EU2B-YS2J03F
Idec
ROTARY SWITCH;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
Itt Semiconductor
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Alpha & Omega Semiconductor
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
World Products
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
TL494IDR
Texas Instruments
TL494IDR by Texas Instruments is a voltage-mode switching controller with 16 terminals, operating at -40 to 85°C. It features a nominal output voltage of 5V, PWM control technique, and push-pull switcher config. Ideal for industrial applications requiring precise regulation in compact designs up to 300 kHz frequency.
LM22680MRX-ADJ/NOPB
LM22680MRX-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 2A output current, 1.285V min output voltage, and 37V max output voltage. Ideal for automotive applications due to its low profile design and wide operating temperature range from -40°C to 125°C.
CHL8316CRT
Infineon Technologies
Switching Regulator or Controllers;
TPS5450DDA
TPS5450DDA by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output current up to 5A. It is ideal for automotive applications due to its voltage-mode control technique, buck switcher configuration, and wide input voltage range of 5.5V to 36V.
LM2596S-12/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5007MMX/NOPB
LM5007MMX/NOPB by Texas Instruments is a switching regulator with a max output voltage of 73V and max output current of 0.5A. It operates in automotive-grade temperatures, making it suitable for various applications requiring efficient power management in tight spaces. With a compact square package style and surface-mount capability, it is ideal for space-constrained designs in automotive electronics and industrial automation systems.
LM2841XMK-ADJL/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54160DGQG4
TPS54160DGQG4 by Texas Instruments is a switching regulator with 1.5A output current, 2500 kHz max switching frequency, and 150°C max operating temperature. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and wide input voltage range of 3.5V to 60V.
SG3525ANG
SG3525ANG by Onsemi is a VOLTAGE-MODE switching controller with 16 terminals. It operates b/w 0-70°C, handles up to 400 kHz switching frequency, and supports push-pull switcher config. Ideal for applications requiring PWM control of power converters in the commercial temperature range.
TPS60403DBVT
TPS60403DBVT by Texas Instruments is a small outline, low profile switching regulator with a max output current of 0.06A and a max switching frequency of 400kHz. Ideal for industrial applications requiring an input voltage range from 1.8V to 5.25V, it operates in temperatures ranging from -40°C to 85°C.
TPS54140ADRCR
TPS54140ADRCR by Texas Instruments is a switching regulator with 1.5A output current, 39V max output voltage, and 2500kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with a small outline package style.
TPS5420D
TPS5420D by Texas Instruments is a voltage-mode switching regulator with a max output current of 2A and max output voltage of 31V. It operates in the automotive temperature grade range (-40 to 125°C) making it suitable for automotive applications. With a compact small outline package style, it is ideal for space-constrained designs.
LM5085MYX/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Qualification: Not Qualified;
171032401
Wuerth Elektronik & Kg
171032401 by Wurth Elektronik is a BUCK switching regulator with a nominal input voltage of 24V and nominal output voltage of 12V. It operates in automotive-grade temperatures (-40 to 125°C) with a max switching frequency of 800 kHz. This MICROELECTRONIC ASSEMBLY is surface mountable and suitable for various applications requiring efficient power regulation.
LM2676SX-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: YES; Switcher Config: BUCK;
LMR38020SDDAR
LMR38020SDDAR by Texas Instruments is a switching regulator with 2A output current, 1V min output voltage, and 2200kHz max switching frequency. Ideal for applications requiring efficient power conversion in a compact design, such as portable electronics or industrial automation systems.
LM27313XMFX/NOPB
LM27313XMFX/NOPB by Texas Instruments is a switching regulator with a small outline, low profile package. It has a max operating temperature of 125°C and can handle input voltages from 2.7V to 14V. This regulator is commonly used in automotive applications for its pulse width modulation control technique and boost configuration.
PTPS63900DSKR
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel;
LMZ14203TZX-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: 3 A;
LM2676S-ADJ
LM2676S-ADJ by Texas Instruments is a switching regulator with a max output current of 5.4A and a max output voltage of 37V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AP1509-50SG-13
Diodes Incorporated
Diodes Inc. AP1509-50SG-13 is a small outline switching regulator with 8 terminals, operating b/w -20°C to 85°C. It has a max output current of 2A, nominal input voltage of 12V, and supports pulse width modulation control technique. Ideal for applications requiring efficient voltage-mode buck switching regulators with a wide input voltage range up to 22V.
AP1501-T5G-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XSFM-T5;
AP1501A-50K5G-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP1513SG-13
AP1513SG-13 by Diodes Inc. is a voltage-mode switching regulator with 2A output current, 400kHz max switching frequency, and 85°C max operating temp. Ideal for applications requiring efficient power conversion in compact spaces like consumer electronics and industrial controls.
AP1507-12D5L-13
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-252; Package Shape: RECTANGULAR; Surface Mount: YES;
AP1501-50K5G-13
AP1501-50K5G-13 by Diodes Incorporated is a switching regulator with a max output current of 6.5A and a max input voltage of 40V. It is commonly used in applications requiring voltage regulation, such as power supplies and battery chargers.
AP1509-SG-13
AP1509-SG-13 by Diodes Inc. is a switching regulator with 2A output current, 173kHz max switching frequency, and voltage-mode control. Ideal for applications requiring efficient power conversion in a compact design, this IC operates b/w -20°C to 85°C and supports input voltages from 4.5V to 22V.
AP1507-33D5L-13
AP1507-D5L-13
AP1501A-50K5G-U
AP1501A-50K5G-U by Diodes Inc. is a switching regulator with a max output current of 7.5 A and a max input voltage of 40 V. It operates using pulse width modulation control technique and is commonly used in applications requiring voltage regulation, such as power supplies and battery chargers.
AP1501A-K5G-13
AP1501-K5G-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
AP1501-12T5R
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
AP1501-12K5L-U
AP1501-12T5RA
AP1501-12T5RG-13
AP1501-12K5G-U
AP1501-12T5
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Finish: TIN LEAD;
AP1501-12T5RG-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
AP1501-12T5RL
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved