Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
MC44604PG
Onsemi
MC44604PG by Onsemi is a VOLTAGE-MODE SWITCHING CONTROLLER with 16 terminals, operating b/w -25 to 85 °C. It has a max output current of 0.75 A and operates at a frequency of 250 kHz. Ideal for applications requiring efficient power regulation in compact spaces.
ALSO OPERATES IN CURRENT MODE
SWITCHING CONTROLLER
VOLTAGE-MODE
PULSE WIDTH MODULATION
15 V
10 V
12 V
R-PDIP-T16
e3
19.175 mm
1
16
85 Cel
-25 Cel
.75 A
PLASTIC/EPOXY
DIP
DIP16,.3
RECTANGULAR
IN-LINE
260
Not Qualified
4.44 mm
Switching Regulator or Controllers
NO
SINGLE
250 kHz
BIPOLAR
OTHER
TIN
THROUGH-HOLE
2.54 mm
DUAL
7.62 mm
LNK304P
Power Integrations
LNK304P by Power Integrations is a switching regulator IC with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 0.4A and operates at a frequency of up to 70 kHz in automotive applications. The package style is in-line, with dimensions of 9.575mm x 6.35mm x 3.68mm, making it suitable for buck configuration PWM control techniques.
REQUIRES AN AC SUPPLY OF 85 TO 256V
SWITCHING REGULATOR
R-PDIP-T8
e0
9.575 mm
8
125 Cel
-40 Cel
.4 A
3.68 mm
BUCK
70 kHz
AUTOMOTIVE
TIN LEAD
6.35 mm
UCC1800J883B
Texas Instruments
SWITCHING CONTROLLER; Temperature Grade: MILITARY; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CURRENT-MODE
7.5 V
R-GDIP-T8
9.58 mm
-55 Cel
1 A
CERAMIC, GLASS-SEALED
DIP8,.3
NOT SPECIFIED
MIL-STD-883 Class B
5.08 mm
25 mA
BUCK-BOOST
1000 kHz
BICMOS
MILITARY
Tin/Lead (Sn/Pb)
UC3842ANG
UC3842ANG by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. It operates b/w 0-70°C, ideal for commercial applications requiring pulse width modulation control at input voltages ranging from 11.5V to 30V.
30 V
11.5 V
9.78 mm
70 Cel
0 Cel
4.45 mm
500 kHz
COMMERCIAL
UC3845NG
UC3845NG by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. It operates b/w -40 to 85°C, ideal for commercial applications requiring pulse width modulation control in a single switcher configuration.
25 V
8.2 V
NCP1216P65
NCP1216P65 by Onsemi is a switching controller with current-mode control technique, 71.5 kHz max switching frequency, and 0.5 A max output current. It is used in applications requiring pulse width modulation for power regulation in compact designs.
11 V
R-PDIP-T7
7
.5 A
235
71.5 kHz
CMOS
NCP1217AP100
NCP1217AP100 by Onsemi is a switching controller with current-mode control technique, 0.5A output current, and 110kHz max switching frequency. Ideal for applications requiring pulse width modulation in a compact package style with 7 terminals and through-hole terminal form.
8.3 V
110 kHz
NCP1230P100
NCP1230P100 by Onsemi is a switching controller with current-mode control technique, operating at -40 to 125 °C. It has a max output current of 0.5A and operates at a max switching frequency of 110kHz. Ideal for automotive applications due to its temperature grade and nominal input voltage of 13V.
PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE
8.4 V
13 V
DIP7/8,.3
NCP1230P65
NCP1230P65 by Onsemi is a switching controller with current-mode control technique. It operates in automotive temperature grade range (-40 to 125 °C) and has a max output current of 0.5 A at a switching frequency of 72 kHz. Ideal for applications requiring pulse width modulation in automotive electronics.
72 kHz
TSM007IN
STMicroelectronics
TSM007IN by STMicroelectronics is a current-mode switching regulator with a max input voltage of 25V and operates at up to 500kHz. It features an 8-terminal, in-line design with a compact size of 7.62mm width. Ideal for efficient power management in various electronic applications.
95 Cel
4.8 mm
MATTE TIN
MC33260PG
MC33260PG by Onsemi is a VOLTAGE-MODE switcher with 0.5 A output current. It operates b/w -40 to 105 °C and supports PULSE WIDTH MODULATION control technique. Ideal for POWER FACTOR CONTROL applications due to its boost configuration and 13-16 V input voltage range.
POWER FACTOR CONTROLLER
16 V
8.5 V
9.27 mm
105 Cel
5.33 mm
BOOST
INDUSTRIAL
MC34262PG
MC34262PG by Onsemi is a switching regulator with 12V nominal voltage, 0.5A max output current, and boost switcher config. It operates in a temperature range of 0-85 °C and is ideal for power factor control applications.
28 V
9 V
12
20 mA
MC44608P40G
MC44608P40G by Onsemi is a voltage-mode switching controller with 44 kHz max frequency. It operates b/w -25 to 85 °C and supports input voltages from 3.6V to 13V. Ideal for applications requiring pulse width modulation control technique in a single switcher configuration.
3.6 V
44 kHz
NCP1001PG
NCP1001PG by Onsemi is a VOLTAGE-MODE SWITCHING REGULATOR with 2A output current, operating b/w -40 to 125 °C. Ideal for automotive applications, it features a max switching frequency of 115 kHz and a compact rectangular package style.
7.9 V
8.6 V
2 A
115 kHz
NCP1002PG
NCP1002PG by Onsemi is a VOLTAGE-MODE switching regulator with 2A output current, operating b/w -40 to 125 °C. Ideal for automotive applications, it features a max switching frequency of 115 kHz and package style IN-LINE.
NCP1011AP130G
NCP1011AP130G by Onsemi is a switching regulator with 7 terminals, 143 kHz max frequency, and 0.55 A output current. It uses pulse width modulation control technique for applications requiring efficient power conversion in compact spaces.
8 V
.55 A
143 kHz
30
NCP1200AP100G
NCP1200AP100G by Onsemi is a switching controller with current-mode control technique, 114 kHz max switching frequency, and 0.25 A output current. It is ideal for applications requiring pulse width modulation in power supply designs.
.25 A
114 kHz
NCP1200AP40G
NCP1200AP40G by Onsemi is a switching controller with current-mode control technique, 48 kHz max switching frequency, and 0.25 A max output current. It is used in applications requiring pulse width modulation for power regulation in compact spaces.
48 kHz
NCP1200AP60G
NCP1200AP60G by Onsemi is a switching controller with 8 terminals, 68 kHz max frequency, and 0.25 A output current. It uses pulse width modulation control technique for applications requiring efficient power management in compact spaces. The IC's CMOS technology and current-mode control make it ideal for various electronic devices.
68 kHz
NCP1200P100G
NCP1200P100G by Onsemi is a switching controller with 8 terminals, operating at a max frequency of 116 kHz. It offers a max output current of 0.25 A and uses pulse width modulation for control. This CMOS technology device is ideal for applications requiring efficient power regulation in compact spaces.
116 kHz
NCP1205PG
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ALSO HAS RESONANT CONTROL TECHNIQUE
125 kHz
NCP1207AP
NCP1207AP by Onsemi is a switching controller with current-mode control technique. It operates b/w -40 to 125 °C and has a max output current of 0.5 A. Widely used in automotive applications due to its CMOS technology and pulse width modulation for efficient power management.
RESONANT CONTROL TECHNIQUE IS ALSO AVAILABLE
10.6 V
NCP1230AP65
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NCP1207PG
NCP1207PG by Onsemi is a current-mode switching controller with 8 terminals in an inline package. It operates at a max frequency of 150 kHz, delivering up to 0.5 A output current. Ideal for applications requiring pulse width modulation control technique and single switcher configuration in compact designs.
150 kHz
NCP1212PG
NCP1212PG by Onsemi is a switching controller with current-mode control technique. It operates b/w -25 to 105°C, with input voltage range of 10-25V and output current up to 1A at 200 kHz frequency. Ideal for applications requiring efficient power regulation in compact spaces.
200 kHz
MC33368PG
MC33368PG by Onsemi is a switching regulator with current-mode control and PWM technique. It operates b/w -25 to 125 °C, suitable for power factor correction applications. With a max output current of 0.01 A, it has 16 terminals in an inline package style.
14.5 V
.01 A
MC34025PG
MC34025PG by Onsemi is a 16-terminal switching controller with VOLTAGE-MODE control technique. It operates b/w 0-70 °C, supports input voltage range of 8.8-30V, and offers max output current of 2A. Ideal for applications requiring high-frequency PUSH-PULL switcher configuration in commercial temperature grade environments.
CAN BE OPERATED IN CURRENT MODE
8.8 V
PUSH-PULL
NCP1014AP100G
NCP1014AP100G by Onsemi is a switching regulator with 1A output current, 110kHz max frequency, and 8V nominal input voltage. It uses pulse width modulation control technique and has a through-hole terminal form. Ideal for applications requiring efficient power conversion in compact spaces.
UC2842ANG
UC2842ANG by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. It operates b/w -25 to 85 °C, ideal for regulating power in various applications like industrial automation and consumer electronics.
UC2844NG
SI9100DJ02-E3
Vishay Intertechnology
Vishay Intertechnology's SI9100DJ02-E3 is a switching regulator with 14 terminals, operating b/w -40 to 85°C. It features a max output current of 2.5A and a switching frequency of 3000 kHz, suitable for industrial applications requiring precise current-mode control in compact designs.
13.5 V
9.5 V
R-PDIP-T14
18.285 mm
14
2.5 A
DIP14,.3
3000 kHz
BCDMOS
NCP1601AP
POWER FACTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
18 V
15
5 mA
405 kHz
NCP1601BP
NCP1601BP by Onsemi is a VOLTAGE-MODE switcher with 15V supply, 0.75A output current, and 405kHz switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and PLASTIC/EPOXY package style.
NCP1653P
NCP1653P by Onsemi is a current-mode switching regulator with 15V nominal voltage, 1.5A max output current, and 110kHz max switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and pulse width modulation control technique.
ALSO OPERATES IN PEAK CURRENT MODE
9.95 V
1.5 A
6 mA
UC2843ANG
ICE3BR1765J
Infineon Technologies
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
9.8 V
9.385 mm
73.5 kHz
SI9110DJ-E3
SI9110DJ-E3 by Vishay Intertechnology is a switching controller with current-mode control technique. It operates in industrial temperature grade range from -40 to 85 °C, with a max output current of 0.01 A and a max switching frequency of 1000 kHz. Ideal for applications requiring pulse width modulation in power supply circuits.
120 V
48 V
4 V
Matte Tin (Sn)
SI9120DJ-E3
SI9120DJ-E3 by Vishay Intertechnology is a switching controller with 16 terminals, operating temperature range of -40 to 85°C, and max output current of 0.125A. Ideal for industrial applications requiring pulse width modulation control at a max switching frequency of 3000 kHz.
20.13 mm
.125 A
UC2845NG
UC2845NG by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. It operates b/w -25 to 85°C, ideal for regulating power in various applications like industrial automation and consumer electronics.
NCP1203P60G
NCP1203P60G by Onsemi is a switching controller with current-mode control technique, operating at -40 to 125 °C. It has a max output current of 0.25 A and operates at a max frequency of 73 kHz. Ideal for automotive applications due to its CMOS technology and single switcher configuration.
73 kHz
ICE1QS01
POWER FACTOR CONTROLLER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Control Technique: RESONANT CONTROL;
RESONANT CONTROL
9.52 mm
4.37 mm
ICE3A1065
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Equivalence Code: DIP8,.3;
21 V
100 kHz
ICE3B0565
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 9.52 mm;
67 kHz
LNK500PN
LNK500PN by Power Integrations is a switching regulator with 7 terminals, operating b/w -40 to 125°C. It has a max output current of 0.4A and operates at a frequency of 49.5kHz. Ideal for automotive applications due to its temperature grade and pulse width modulation control technique.
REQUIRES AN AC SUPPLY OF 85 TO 265 V
6 V
5.5 V
5.75 V
49.5 kHz
LM2575IN
LM2575IN by Texas Instruments is a 16-terminal switching regulator with a voltage-mode control mode. It operates b/w -40 to 125°C, offering an output voltage range of 1.23-37V and max current of 1A. Ideal for automotive applications due to its compact size (19.305x7.62x5.08mm) and wide input voltage range (4.75-40V).
40 V
4.75 V
e4
19.305 mm
37 V
1.23 V
58 kHz
NICKEL PALLADIUM GOLD
NCP1216AP65G
NCP1216AP65G by Onsemi is a switching controller with current-mode control technique, operating at 71.5 kHz frequency and supporting up to 0.5 A output current. It has 7 terminals in an inline package style, ideal for applications requiring pulse width modulation in power management systems.
NCP1216P65G
NCP1216P65G by Onsemi is a switching controller with current-mode control technique. It has a max output current of 0.5A and operates at a max switching frequency of 71.5kHz. Ideal for applications requiring efficient power management in compact spaces.
TL5001CP-P
9.81 mm
-20 Cel
.1 A
© 2023 All rights reserved
