Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
NCP1076BAP130G
Onsemi
NCP1076BAP130G by Onsemi is a switching controller with 12V nominal voltage, 143 kHz max switching frequency, and -40 to 125 °C operating temperature range. Ideal for automotive applications due to its current-mode control technique and buck-boost switcher configuration.
SWITCHING CONTROLLER
CURRENT-MODE
PULSE WIDTH MODULATION
R-PDIP-T7
e3
9.32 mm
1
7
125 Cel
-40 Cel
PLASTIC/EPOXY
DIP
DIP7/8,.3
RECTANGULAR
IN-LINE
4.45 mm
15 mA
12 V
NO
BUCK-BOOST
143 kHz
MOS
AUTOMOTIVE
MATTE TIN
THROUGH-HOLE
2.54 mm
DUAL
7.62 mm
NCP1076BBP100G
NCP1076BBP100G by Onsemi is a current-mode switching controller with 12V nominal voltage, 110 kHz max switching frequency, and -40 to 125°C operating temp range. Ideal for automotive applications due to its MOS technology, BUCK-BOOST switcher config, and through-hole terminal form.
NOT SPECIFIED
110 kHz
NCP1077ABP100G
NCP1077ABP100G by Onsemi is a switching controller with 12V supply voltage, 110 kHz max frequency, and -40 to 125 °C operating temp. Ideal for automotive applications due to its current-mode control, pulse width modulation, and buck-boost configuration.
NCP1077BAP100G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NCP1077BAP130G
NCP1077BBP100G
NCP1077BBP100G by Onsemi is a switching controller with 12V supply voltage, 110 kHz max frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its current-mode control, pulse width modulation, and buck-boost configuration in a compact rectangular package.
NCP1077BBP130G
NCP1077BBP130G by Onsemi is a switching controller with 12V supply voltage, 143 kHz max switching frequency, and -40 to 125 °C operating temp range. Ideal for automotive applications due to its current-mode control, pulse width modulation technique, and buck-boost switcher configuration.
NCP1079AAP100G
NCP1079AAP100G by Onsemi is a switching controller with 12V supply voltage, 7 terminals, and 110 kHz max switching frequency. Ideal for automotive applications due to its current-mode control, pulse width modulation technique, and buck-boost switcher configuration.
NCP1079ABP065G
NCP1079ABP065G by Onsemi is a switching controller with 12V supply voltage, 71 kHz max switching frequency, and -40 to 125 °C operating temp. Ideal for automotive applications due to its buck-boost configuration and pulse width modulation control technique.
71 kHz
NCP1079ABP100G
NCP1079ABP100G by Onsemi is a switching controller with 12V nominal voltage, 110 kHz max switching frequency, and -40 to 125 °C operating temp. Ideal for automotive applications due to its pulse width modulation control technique and buck-boost switcher configuration.
NCP1079BAP065G
NCP1079BAP065G by Onsemi is a switching controller with a 12V nominal voltage and 71 kHz max switching frequency. Ideal for automotive applications, it features current-mode control, pulse width modulation, and buck-boost switcher configuration in a compact rectangular package.
NCP1079BAP100G
NCP1079BAP100G by Onsemi is a switching controller with 12V supply voltage, 110 kHz max frequency, and -40 to 125 °C operating temp. Ideal for automotive applications due to its current-mode control, pulse width modulation, and buck-boost configuration.
NCP1079BAP130G
NCP1079BAP130G by Onsemi is a switching controller with 12V supply voltage, 143 kHz max switching frequency, and -40 to 125 °C operating temp. Ideal for automotive applications due to its current-mode control, pulse width modulation, and buck-boost configuration.
NCP1079BBP065G
NCP1079BBP065G by Onsemi is a switching controller with a 12V nominal voltage, operating b/w -40 to 125 °C. It features a max switching frequency of 71 kHz and uses pulse width modulation control technique. Ideal for automotive applications due to its compact size and efficient buck-boost switcher configuration.
NCP1079BBP100G
NCP1079BBP100G by Onsemi is a switching controller with 12V supply voltage, 110 kHz max frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its buck-boost configuration and current-mode control technique in a compact rectangular package.
FSL538APG
FSL538APG by Onsemi is a switching controller with 7 terminals, operating at -40 to 125°C. It has a max output current of 0.93A and operates at a frequency of up to 106kHz. Ideal for automotive applications due to its compact size and pulse width modulation control mode.
9.59 mm
.93 A
5.33 mm
2 mA
14 V
106 kHz
FSL538HPG
FSL538HPG by Onsemi is a switching controller with 7 terminals, operating at -40 to 125 °C. It has a max output current of 0.706 A and operates at a frequency of 138 kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
.706 A
138 kHz
TDA46052HKLA1
Infineon Technologies
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
15.5 V
7.5 V
10 V
R-PDIP-T8
10 mm
8
85 Cel
-20 Cel
1.5 A
4.2 mm
SINGLE
BIPOLAR
OTHER
NCP1063AP060G
NCP1063AP060G by Onsemi is a switching controller with current-mode control, operating at -40 to 125°C. It has a buck-boost configuration, 60 kHz max switching frequency, and 14V nominal input voltage. Ideal for automotive applications due to its through-hole terminal form and compact size of 9.59mm x 7.62mm x 5.33mm.
60 kHz
NCP1063AP100G
NCP1063AP100G by Onsemi is a switching controller with current-mode control, operating at -40 to 125°C. It features a buck-boost switcher config, 100 kHz max switching frequency, and 14V nominal input voltage. Ideal for automotive applications due to its package style, matte tin finish, and through-hole terminal form.
100 kHz
ICE2PCS03XKLA1
POWER FACTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
POWER FACTOR CONTROLLER
25 V
11.7 V
18 V
9.435 mm
2 A
4.8 mm
BOOST
104 kHz
ICE2QS03XKLA1
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE;
ALSO HAS CONTROL TECHNIQUE OF RESONANT
26 V
11.2 V
9.385 mm
52 kHz
BICMOS
TIN
TDA46053XKLA1
TDA46053XKLA1 by Infineon is a SWITCHING CONTROLLER with 8 terminals, operating b/w -20 to 85 °C. It has a max output current of 1.5 A and operates on BIPOLAR tech. Ideal for applications requiring a single switcher config with input voltage range of 7.5-15.5 V, in PLASTIC/EPOXY package style.
TDA168462HKLA1
POWER FACTOR CONTROLLER; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Input Voltage: 8.5 V;
8.5 V
R-PDIP-T14
19.05 mm
14
.1 A
4.37 mm
98 kHz
FSL337LRN
FSL337LRN by Onsemi is a switching regulator with 7 terminals, operating b/w -40 to 125 °C. It features current-mode control, BUCK switcher config, and matte tin terminal finish. This IC is ideal for applications requiring precise power management in compact spaces.
SWITCHING REGULATOR
9.7 mm
3.8 mm
1.3 mA
BUCK
Matte Tin (Sn) - annealed
6.4 mm
NCP1075AAP065G
NCP1075AAP065G by Onsemi is a switching controller with a 12V nominal voltage and 71 kHz max switching frequency. It operates in automotive-grade temperatures from -40 to 125 °C, making it ideal for power management applications requiring efficient current-mode control. The package style is in-line with 7 terminals and a compact size of 9.32mm x 7.62mm x 4.45mm, suitable for space-constrained designs.
NCV1072P065G
NCV1072P065G by Onsemi is a switching controller with current-mode control technique, operating at -40 to 125 °C. It features a max switching frequency of 71 kHz and AEC-Q100 screening level, suitable for automotive applications. With a package style of IN-LINE and through-hole terminal form, it offers a compact design with 7 terminals and nominal voltage of 8 V.
AEC-Q100
8 V
NCV1075P100G
NCV1075P100G by Onsemi is a switching controller with 7 terminals, operating b/w -40 to 125 °C. It features a max switching frequency of 110 kHz and uses pulse width modulation for control. Ideal for automotive applications due to AEC-Q100 screening level.
NCV1076P130G
NCV1076P130G by Onsemi is a switching controller with a supply voltage of 8V, operating temperature range from -40 to 125 °C, and max switching frequency of 143 kHz. It is designed for automotive applications requiring current-mode control and pulse width modulation techniques in a compact rectangular package style.
NCV1077P100G
NCV1077P100G by Onsemi is a switching controller with 8V supply voltage, -40 to 125 °C operating temp range, and 110 kHz max switching frequency. Ideal for automotive applications due to AEC-Q100 screening level and buck-boost switcher config in a compact rectangular package.
LM2574-12YN
Microchip Technology
LM2574-12YN by Microchip: 1.8A output current, 40V max input voltage, BUCK switcher config. Ideal for industrial applications requiring a 12V nominal input/output voltage with -40 to 85°C operating range. Package style: IN-LINE, terminal finish: MATTE TIN, and package material: PLASTIC/EPOXY.
40 V
9.525 mm
1.8 A
INDUSTRIAL
FSL336LRDN
FSL336LRDN by Onsemi is a switching controller with a max output current of 2A and a max switching frequency of 55kHz. It operates in automotive temperature grades, with a control mode of current-mode PWM. This IC is ideal for applications requiring efficient power management in compact spaces.
55 kHz
Matte Tin (Sn)
© 2023 All rights reserved
