Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
NCP5393MNR2G
Onsemi
NCP5393MNR2G by Onsemi is a VOLTAGE-MODE SWITCHING CONTROLLER with 900 kHz MAX Switching Frequency. It operates b/w 0-70 °C and comes in a 48-terminal CHIP CARRIER package. Ideal for high-frequency power conversion applications.
SWITCHING CONTROLLER
VOLTAGE-MODE
S-PQCC-N48
e3
1
48
70 Cel
0 Cel
PLASTIC/EPOXY
QCCN
LCC48,.27SQ,20
SQUARE
CHIP CARRIER
260
Not Qualified
Switching Regulator or Controllers
YES
900 kHz
COMMERCIAL
TIN
NO LEAD
.5 mm
QUAD
30
LV8747TA-NH
LV8747TA-NH by Onsemi is a switching controller with 1.75A output current, 800kHz max switching frequency, and boost switcher config. Ideal for applications requiring pulse width modulation control technique in a compact flatpack package.
CURRENT-MODE
PULSE WIDTH MODULATION
5 V
0 V
S-PQFP-G64
7 mm
3
64
85 Cel
-20 Cel
1.75 A
QFP
TQFP64,.35SQ,16
FLATPACK
24
1.2 mm
Motion Control Electronics
8 mA
24 V
BOOST
800 kHz
BICMOS
OTHER
MATTE TIN
GULL WING
.4 mm
MCP19114T-E/MQ
Microchip Technology
MCP19114T-E/MQ by Microchip is a current-mode switching controller with PWM control technique. It operates b/w -40 to 125 °C, ideal for automotive applications. With a buck-boost switcher config and max freq of 2000 kHz, it supports input voltage range from 4.5V to 42V.
PWM
42 V
4.5 V
12 V
S-PQCC-N28
5 mm
28
125 Cel
-40 Cel
HVQCCN
LCC28,.2SQ,20
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
1 mm
BUCK-BOOST
2000 kHz
AUTOMOTIVE
TPS56221DQPT
Texas Instruments
TPS56221DQPT by Texas Instruments is a switching controller with a max output current of 25A and a max switching frequency of 1000kHz. It operates in voltage-mode control technique, suitable for automotive applications due to its temperature grade. With a small outline package style and push-pull switcher configuration, it offers precise regulation from 0.6V to 12V output voltage range.
14 V
R-PDSO-N22
6 mm
2
22
25 A
.6 V
6.5 V
SON
RECTANGULAR
SMALL OUTLINE
1.5 mm
PUSH-PULL
1000 kHz
Matte Tin (Sn)
DUAL
NOT SPECIFIED
TPS40322RHBT
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.6V
20 V
3 V
S-PQCC-N32
e4
32
60 A
5.6 V
PHASE-SHIFT
Nickel/Palladium/Gold (Ni/Pd/Au)
UCD7232RTJT
UCD7232RTJT by Texas Instruments is a voltage-mode switching controller with a 12V nominal input voltage and 6A max output current. Operating in an automotive temperature grade range, it features a control technique of pulse width modulation and a max switching frequency of 2000 kHz. This chip carrier package is suitable for various applications requiring precise voltage regulation.
15 V
4.7 V
S-PQCC-N20
4 mm
20
6 A
.8 mm
10 mA
SINGLE
NICKEL PALLADIUM GOLD
MP2905EK-LF-Z
Monolithic Power Systems
MP2905EK-LF-Z by Monolithic Power Systems is a switching controller with current-mode control technique. It operates b/w -20°C to 85°C, with input voltage ranging from 3V to 28V and output voltage at 5V. This small outline package has a max switching frequency of 500 kHz, making it ideal for various applications requiring efficient power regulation.
ALSO OPER IN VOLT MODE AND PWM CTRL TECH ALSO POS, OPE IN ADJUE MODE FROM 0.6 TO 25.2V
HYSTERETIC CURRENT MODE
28 V
S-PDSO-G10
3 mm
10
TSSOP
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.1 mm
500 kHz
MP2905EK-LF
MP2905EK-LF by Monolithic Power Systems is a switching controller with current-mode control technique. It operates b/w -20 to 85 °C, supporting input voltage range of 3-28 V and output voltage of 5 V. With a max switching frequency of 500 kHz, it is ideal for applications requiring efficient power regulation in compact spaces.
40
NCP4201MNR2G
NCP4201MNR2G by Onsemi is a voltage-mode switching controller with 40 terminals in a square chip carrier package. It operates b/w 0-85 °C, supports input voltages from 1.7V to 24V, and outputs at 3.3V with a max frequency of 6000 kHz. Ideal for push-pull switcher configurations in various applications requiring precise pulse width modulation control.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.375 TO 18V; ALSO OPERATES IN CURRENT MODE
1.7 V
S-XQCC-N40
3.3 V
UNSPECIFIED
6000 kHz
Tin (Sn)
UCC25706QDRQ1
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
8.8 V
30 V
R-PDSO-G8
4.9 mm
8
.005 A
SOP
SOP8,.25
1.75 mm
11 V
4000 kHz
1.27 mm
3.9 mm
NCP4303BMNTWG
NCP4303BMNTWG by Onsemi is a switching controller with boost configuration. It operates in automotive temperature grade range (-40 to 125 °C) and supports input voltage from 9.5V to 28V. With resonant control technique, it achieves a max switching frequency of 500kHz, making it ideal for power management applications.
RESONANT CONTROL
9.5 V
S-PDSO-N8
HVSON
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
NCP6251MNR2G
NCP6251MNR2G by Onsemi is a 48-terminal switching controller with PWM control technique, operating at 5V input voltage and 1000 kHz frequency. Ideal for applications requiring push-pull switcher configuration in commercial temperature grade environments.
5.25 V
4.75 V
S-XQCC-N48
PM8803
STMicroelectronics
PM8803 by STMicroelectronics is a switching controller with current-mode control technique. It operates in industrial temperature range (-40 to 85 °C) and has a max switching frequency of 1MHz. With a nominal input voltage of 48V, it is suitable for various applications requiring high-frequency power conversion.
32.5 V
48 V
R-PDSO-G20
6.5 mm
HTSSOP
TSSOP20,.25
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
INDUSTRIAL
.65 mm
4.4 mm
NCV8852DR2G
NCV8852DR2G by Onsemi is a current-mode switching controller with a max switching frequency of 501 kHz. It operates with a nominal input voltage range of 3.4V to 36V, making it suitable for various applications requiring efficient power management in compact spaces. The package style is small outline, ideal for surface mount designs in electronic devices.
36 V
3.4 V
4 V
501 kHz
NCV887000D1R2G
NCV887000D1R2G by Onsemi is a switching controller with current-mode control technique. It operates in automotive temperature grade range (-40 to 125 °C) and supports input voltage from 3.2V to 40V. With a max switching frequency of 55 kHz, it is ideal for push-pull switcher configurations in various automotive applications.
40 V
3.2 V
13.2 V
55 kHz
TPS51518RUKT
TPS51518RUKT by Texas Instruments is a voltage-mode switching controller with 20 terminals, operating b/w -10 to 105°C. It supports input voltages from 3-28V and output currents up to 20A, with a max output voltage of 2V. Ideal for applications requiring high efficiency power conversion in compact spaces.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.5 TO 2V
105 Cel
-10 Cel
20 A
2 V
.5 V
LCC20,.11SQ,16
350 kHz
TEA1733BT/N2,118
NXP Semiconductors
TEA1733BT/N2,118 by NXP Semiconductors is a compact switching controller designed for efficient power management. It operates with a nominal input voltage of 20V, supports a max switching frequency of 133kHz, and features current-mode control. Ideal for applications requiring reliable voltage regulation in space-constrained environments.
133 kHz
TEA1733P/N1,112
TEA1733P/N1,112 by NXP Semiconductors is a current-mode switching controller with a max input voltage of 30V and nominal output of 10.5V. It features an 8-terminal in-line package and operates at a max frequency of 71kHz. Ideal for efficient power regulation in various applications.
R-PDIP-T8
9.5 mm
10.5 V
DIP
DIP8,.3
IN-LINE
4.2 mm
NO
71 kHz
THROUGH-HOLE
2.54 mm
7.62 mm
TEA1738FT/N1,118
TEA1738FT/N1,118 by NXP Semiconductors is a compact switching controller designed for efficient power management. It operates with a nominal input voltage of 20V, features a max switching frequency of 78kHz, and utilizes current-mode control. Ideal for applications requiring reliable voltage regulation in space-constrained environments.
78 kHz
TEA1752LT/N1,518
TEA1752LT/N1,518 by NXP Semiconductors is a compact switching controller designed for boost applications. It features a nominal input voltage of 20V, a max switching frequency of 150kHz, and operates in current-mode control. Ideal for efficient power management in various electronic devices.
38 V
16 V
R-PDSO-G16
9.9 mm
16
SOP16,.25
150 kHz
L6738ATR
L6738ATR by STMicroelectronics is a voltage-mode switching controller with a buck switcher configuration. It operates b/w -40 °C to 125°C, making it suitable for automotive applications. With a max switching frequency of 200 kHz, this chip carrier package with very thin profile and nickel/palladium/gold terminal finish is ideal for compact designs.
S-XQCC-N16
LCC16,.12SQ,20
BUCK
200 kHz
L6738A
L6738A by STMicroelectronics is a voltage-mode switching controller with a buck switcher configuration. Operating temperature ranges from -40 to 125 °C, suitable for automotive applications. It has a max switching frequency of 200 kHz and supports input voltages b/w 5-12V.
NCV887101D1R2G
NCV887101D1R2G by Onsemi is a small outline switching controller with current-mode control technique. It operates in automotive temperature grade range (-40 to 125 °C) and supports boost switcher configuration. With a max input voltage of 40V, it has a high switching frequency of 1100 kHz making it suitable for various power management applications.
1100 kHz
L6564TD
L6564TD by STMicroelectronics is a switching controller with 10 terminals, operating b/w -40 to 125 °C. It features a current-mode control technique, pulse width modulation, and supports input voltages from 10.5V to 22.5V. Ideal for automotive applications due to its small outline package style and low supply current of 6mA.
22.5 V
R-PDSO-G10
SSOP
SOP10,.25,40
SMALL OUTLINE, SHRINK PITCH
12
6 mA
L6738
STMicroelectronics L6738 is a 16-terminal switching controller with VOLTAGE-MODE control mode, suitable for automotive applications. It operates b/w -40 to 125 °C and has a max switching frequency of 200 kHz. The IC features PULSE WIDTH MODULATION and BUCK switcher config in a SQUARE package style.
ADP1053ACPZ-R7
Analog Devices
ADP1053ACPZ-R7 by Analog Devices is a 40-terminal switching controller with a 3.3V nominal voltage, suitable for automotive applications. It operates b/w -40 to 125 °C and features a matte tin terminal finish in a square chip carrier package style. This CMOS technology device is surface-mountable and has a moisture sensitivity level of 3.
S-PQCC-N40
LCC40,.24SQ,20
3.3
Power Management Circuits
CMOS
STLDC08PUR
SWITCHING CONTROLLER; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
TPS43340QPHPRQ1
TPS43340QPHPRQ1 by Texas Instruments is a switching controller with 48 terminals, operating temperature range of -40 to 125°C, and output current up to 2A. Ideal for automotive applications due to its compact size (7x7mm) and pulse width modulation control technique.
13 V
S-PQFP-G48
4
2 A
.9 V
HTFQFP
TQFP48,.35SQ
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
600 kHz
L9758
L9758 by STMicroelectronics is a switching controller with 36 terminals, operating voltage of 5.5-26.5V, and max frequency of 450kHz. Ideal for automotive applications due to its current-mode control, buck-boost configuration, and compact size (15.9mm x 11mm x 3.6mm).
R-PDSO-G36
15.9 mm
36
SSOP36,.56
5.5/26.5
3.6 mm
450 kHz
11 mm
TPS53014DGS
TPS53014DGS by Texas Instruments is a switching regulator with a voltage-mode control technique. It operates in an industrial temperature range from -40 to 85°C, supporting input voltages b/w 4.5V to 28V. With a max output current of 0.424A and a compact package style, it is ideal for various power management applications.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.77 TO 7V
.424 A
7 V
.76 V
TSSOP10,.19,20
Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)
NCP1252APG
NCP1252APG by Onsemi is a switching controller with current-mode control technique, operating at a max frequency of 500 kHz. With a wide input voltage range from 9V to 28V, it is suitable for various applications requiring pulse width modulation in power electronics. The IC comes in an 8-terminal rectangular package with through-hole terminals and tin finish.
9 V
9.59 mm
5.33 mm
TPS53015DGS
TPS53015DGS by Texas Instruments is a switching regulator with a 12V nominal input voltage, 25A max output current, and 500 kHz max switching frequency. It is ideal for industrial applications requiring efficient power management in a compact form factor. The device features voltage-mode control and pulse width modulation for precise regulation in temperature ranges from -40°C to 85°C.
NCP5380AMNR2G
NCP5380AMNR2G by Onsemi is a 32-terminal switching controller with voltage-mode control, operating b/w -40 to 100 °C. It features a max switching frequency of 1500 kHz and is ideal for industrial applications requiring a buck switcher configuration at input voltages ranging from 4.5V to 5.5V.
5.5 V
S-XQCC-N32
100 Cel
LCC32,.2SQ,20
1500 kHz
NCV885300D1R2G
NCV885300D1R2G by Onsemi is a switching controller with current-mode control technique. It operates in buck configuration with a max switching frequency of 374 kHz. Ideal for applications requiring a nominal input voltage of 13.2 V, such as power management systems in various electronic devices.
374 kHz
L6756DTR
STMicroelectronics L6756DTR is a 40-terminal switching controller in a square chip carrier package. It operates in voltage-mode control with a max switching frequency of 215 kHz. Ideal for applications requiring high-frequency regulation in compact designs.
215 kHz
L6756D
STMicroelectronics L6756D is a 40-terminal switching controller in a square chip carrier package. It operates in voltage-mode control with a max switching frequency of 215 kHz. Ideal for applications requiring high-frequency regulation, it features matte tin terminal finish and no-lead terminal form.
NCP1336ADR2G
NCP1336ADR2G by Onsemi is a 13-terminal switching controller with current-mode control. It features matte tin terminal finish, plastic/epoxy package body material, and surface-mount capability. Ideal for applications requiring high-temperature operation up to 260 °C peak reflow temperature for 30 seconds.
13
SOP13/14,.25
NCP1398BDR2G
NCP1398BDR2G by Onsemi is a 15-terminal switching controller with a max switching frequency of 465 kHz. It comes in a plastic/epoxy package and is surface mountable with tin terminal finish. Ideal for applications requiring high-frequency power conversion such as DC-DC converters and LED drivers.
15
SOP15/16,.25
465 kHz
UCC28701DBVT
UCC28701DBVT by Texas Instruments is a current-mode switching controller with a max operating temperature of 125°C. It features a nominal input voltage of 25V and supports buck-boost switcher configuration. Ideal for applications requiring efficient power management in compact spaces, this IC has a small outline package style and can operate within a wide input voltage range from 9V to 35V.
35 V
25 V
R-PDSO-G6
2.9 mm
6
LSSOP
TSOP6,.11,37
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
1.45 mm
132 kHz
.95 mm
1.6 mm
NCP1244AD100R2G
NCP1244AD100R2G by Onsemi is a current-mode switching controller with a max switching frequency of 109 kHz. It comes in a small outline package with 7 terminals and matte tin finish, suitable for various applications requiring efficient power regulation.
R-PDSO-G7
7
SOP7/8,.25
109 kHz
NCP1244BD065R2G
NCP1244BD065R2G by Onsemi is a current-mode switching controller with a max switching frequency of 72 kHz. It comes in a small outline package with 7 terminals and gull wing terminal form. Ideal for applications requiring efficient power regulation in compact electronic devices.
72 kHz
NCP1244BD100R2G
NCP1244BD100R2G by Onsemi is a current-mode switching controller with max. switching frequency of 109 kHz. It has 7 terminals, GULL WING form, and is surface mountable. Ideal for applications requiring efficient power regulation in compact spaces.
NCP1254ASN65T1G
NCP1254ASN65T1G by Onsemi is a current-mode switching controller with a max switching frequency of 71 kHz. Its small outline, thin profile package makes it suitable for surface mount applications. With dual terminals and gull wing form, it is ideal for compact electronic devices requiring efficient power regulation.
TSOP
SMALL OUTLINE, THIN PROFILE
NCP4355ADR2G
NCP4355ADR2G by Onsemi is a voltage-mode switching controller with a max switching frequency of 1000 kHz. It operates with an input voltage range from 3.5V to 36V, making it suitable for various power supply applications. This small outline package (4.9mm x 3.9mm) with Gull Wing terminals is ideal for compact designs requiring high-frequency PWM control.
3.5 V
TPS40021MPWPEP
TPS40021MPWPEP by Texas Instruments is a switching regulator with 16 terminals, operating temperature range of -55 to 125°C, and max output current of 25A. Ideal for military applications due to its MIL grade and pulse width modulation control technique. Compact design with small outline package shape makes it suitable for space-constrained environments.
2.25 V
-55 Cel
.7 V
4.9 V
MILITARY
TPS40021MPWPREP
TPS40021MPWPREP by Texas Instruments is a switching controller with a max output current of 25A and max operating temp of 125°C. Ideal for military applications, it operates in voltage-mode control with a min input voltage of 2.25V and nominal output voltage of 4.9V.
UCC28710D
UCC28710D by Texas Instruments is a switching controller with 7 terminals, operating from -40 to 125 °C. It supports buck-boost configuration, with a max input voltage of 35 V and freq modulation control technique. Ideal for automotive applications due to its small outline package and high temp grade.
ALSO OPERATES IN AMPLITUTDE MODULATION CONTROL TECHNIIQUE
CURRENT/VOLTAGE-MODE
FREQUENCY MODULATION
100 kHz
UCC28713D
UCC28713D by Texas Instruments is a switching controller with a nominal input voltage of 25V, operating b/w -40 to 125°C. It features a buck-boost switcher configuration, frequency modulation control technique, and can handle input voltages ranging from 9V to 35V. This IC is suitable for automotive applications due to its small outline package style and high max operating temperature of 125°C.
© 2023 All rights reserved
