Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP5393MNR2G by Onsemi is a VOLTAGE-MODE SWITCHING CONTROLLER with 900 kHz MAX Switching Frequency. It operates b/w 0-70 °C and comes in a 48-terminal CHIP CARRIER package. Ideal for high-frequency power conversion applications.
Median Price
$1.320
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$1.100
10k+ parts
$0.977
Avnet
$1.150
$1.060
$1.000
Verical
$1.375
$1.221
Digiode
$1.026
Chip Stock
Cyclops Electronics Ltd
Vyrian
Corphita
$0.972
Corohmni
$0.993
Vigor
$1.040
Component Stockers USA
$1.110
$0.940
AZTECH Wire
$6.830
$6.560
$6.430
$6.300
Assy Fe
Kepictronics
Continental Prestige Electronics
$0.910
TANS Electronics
A-Z Elektronik GmbH
Kulean Microsystems
Futuretech Components
Perfect Parts
Problanco Electronics
Microchip USA
SupplyDigital Components
UHIMA Technologies
The use of plastic/epoxy as package body material provides good heat dissipation and protection for the internal components of the switching regulator.
Surface mount technology enables easy and efficient installation of the switching regulator onto a printed circuit board, saving space and reducing assembly time.
The square package shape allows for easier handling and assembly of the switching regulator in tight spaces or on densely populated PCBs.
Having a higher number of terminals allows for more flexibility in connections and configurations, making the switching regulator suitable for a wide range of applications.
The chip carrier package style offers a compact and reliable form factor for the switching regulator, making it suitable for portable and space-constrained devices.
With a maximum operating temperature of 70 °C, the switching regulator can reliably operate in various environments without overheating or performance degradation.
The voltage-mode control allows for precise regulation of the output voltage, offering stable and efficient performance for the switching regulator.
The minimum operating temperature of 0 °C ensures that the switching regulator can operate effectively even in colder temperature conditions.
The terminal finish of tin provides good solderability and corrosion resistance, ensuring reliable electrical connections for the switching regulator.
The quad terminal position allows for easy and secure mounting of the switching regulator on the PCB, ensuring proper alignment and connection of terminals.
Being a switching controller IC type, this product offers high efficiency and fast response for regulating and controlling the power output, making it suitable for power-sensitive applications.
With a high maximum switching frequency of 900 kHz, the switching regulator can efficiently regulate and convert power with minimal ripple and noise interference.
The no-lead terminal form offers improved thermal and electrical performance, enhancing the overall reliability and longevity of the switching regulator.
The terminal pitch of 0.5 mm enables precise and compact placement of terminals on the PCB, allowing for efficient routing of connections and minimizing signal interference.
Switching Regulators & Controllers NCP5393MNR2G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Sub-Category:
Surface Mount:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
NCP5393MNR2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 30/Sept/2011
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
261
Deltrol Controls
Other Relays;
LM2671M-ADJ/NOPB
LM2671M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V. It operates in the temperature range of -40 to 125°C, making it suitable for automotive applications. This small outline package has 8 terminals and uses pulse width modulation control technique at a max switching frequency of 400kHz.
NCP1595AMNR2G
Onsemi
NCP1595AMNR2G by Onsemi is a current-mode switching regulator with max output current of 6.1A and max switching frequency of 1130kHz. It operates b/w -40 to 85°C, ideal for industrial applications requiring efficient power management in compact spaces. The IC features pulse width modulation control technique and buck switcher configuration, making it suitable for various electronic devices.
TPS62175DQCR
TPS62175DQCR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 28V. It is commonly used in industrial applications due to its temperature grade and small package size.
TPS54331DR
TPS54331DR by Texas Instruments is a switching regulator with 3A output current, 570kHz max frequency, and 150°C operating temp. Ideal for automotive applications due to its pulse width modulation control technique and buck switcher configuration.
LM22675MR-5.0/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-PDSO-G8;
TPS5450DDAG4
TPS5450DDAG4 by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It supports a max output current of 5A and has a wide input voltage range from 5.5V to 36V, making it suitable for automotive applications requiring efficient power management in compact spaces.
PTN78000AAH
PTN78000AAH by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -40 to 85°C, and max output current of 1.5A. It is ideal for industrial applications requiring a buck-boost switcher configuration with input voltage ranging from 7V to 28.7V and output voltage from -15V to -3V.
LM2576TV-5G
LM2576TV-5G by Onsemi is a 5V switching regulator with max output current of 7.5A and PWM control mode. Ideal for automotive applications, it operates b/w -40 to 125°C, accepting input voltages from 8-40V to deliver stable 5V output. Its buck configuration and high switching frequency make it suitable for various power supply designs.
TPS54140ADGQ
TPS54140ADGQ by Texas Instruments is a switching regulator with 1.5A max output current, 39V max output voltage, and 2500 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with small outline package style.
TPS61023DRLR
TPS61023DRLR by Texas Instruments is a switching regulator with 6 terminals, operating temp. range of -40 to 125°C, and PWM control mode. It has a boost switcher config., max output voltage of 5.5V, and is ideal for automotive applications due to its small size and high switching frequency up to 1MHz.
MC34063AP
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
PTN78020WAH
PTN78020WAH by Texas Instruments is a switching regulator with 7 terminals, offering a max output current of 6A and a max output voltage of 12.6V. Ideal for industrial applications, this hybrid technology device operates b/w -40°C to 85°C, making it suitable for various power management needs in different environments.
PLM76005RNPRQ1
PLM76005RNPRQ1 by Texas Instruments is a 30-terminal switching regulator with a 24V nominal input voltage. It operates in automotive-grade temperatures (-40 to 125°C) and supports a max output current of 5A at up to 500kHz switching frequency. Ideal for applications requiring high efficiency buck converter control in compact spaces.
TPS61170DRVTG4
TPS61170DRVTG4 by Texas Instruments is a switching regulator with a max output current of 1.44A and max output voltage of 38V, ideal for industrial applications. Operating b/w -40 to 85°C, it features pulse width modulation control technique and buck-boost switcher configuration, making it suitable for various power management needs in compact designs. With a small outline package style and surface-mount capability, this regulator offers efficient performance in limited space setups.
LM2678S-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Finish: MATTE TIN;
LM22675MR-5.0/NOPB by Texas Instruments is a switching regulator with 1A output current, 500kHz max switching frequency, and VOLTAGE-MODE control technique. Ideal for automotive applications due to its low profile design, it operates b/w -40°C to 125°C temperature range efficiently regulating voltage from 4.5V to 42V down to a min of 1.285V.
TPS62040DGQ
TPS62040DGQ by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 85°C, and output voltage ranging from 0.7V to 6V. It is ideal for industrial applications requiring a compact design and high efficiency power management up to 2.2A output current at a max frequency of 1500kHz.
TPS61222MDCKTEP
TPS61222MDCKTEP by Texas Instruments is a switching regulator with 6 terminals, operating at -55 to 125°C. It has a boost switcher config, hysteric current mode control technique, and max freq of 2MHz. Ideal for battery charge controllers in military-grade applications due to its compact size and high efficiency.
MC34063AD
Taejin Technology
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS82084SILR
TPS82084SILR by Texas Instruments is a switching regulator with 2A output current, PWM control technique, and 2600 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact MICROELECTRONIC ASSEMBLY package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP5252MNTXG
NCP5252MNTXG by Onsemi is a 16-terminal chip carrier with voltage-mode control, operating b/w -40 to 85°C. It offers a max output current of 2A at a switching frequency of 1100 kHz, suitable for industrial applications requiring a compact and efficient buck switching regulator.
NCP5030MTTXG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5425DBR2G
DUAL SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5359ADR2G
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5911MNTBG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCP5203MNR2G
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 18; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5173MNG
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5209MNR2
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5210MN
DUAL SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5010FCT1G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VFBGA; Package Shape: SQUARE; Surface Mount: YES;
NCP5080MUTXG
BATTERY CHARGE CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCP5173MNR2G
NCP5203MNR2
NCP5173MN
NCP5209MN
NCP5050MTTXG
NCP5050MTTXG by Onsemi is a 10-terminal switching regulator with max output current of 3A and max switching frequency of 1950kHz. It operates b/w -10°C to 85°C, suitable for boost applications in compact designs requiring high efficiency and precise current-mode control.
NCP5201MN
NCP5162D
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5201MNG
DUAL SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 18; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5173MNR2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved