Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP4201MNR2G by Onsemi is a voltage-mode switching controller with 40 terminals in a square chip carrier package. It operates b/w 0-85 °C, supports input voltages from 1.7V to 24V, and outputs at 3.3V with a max frequency of 6000 kHz. Ideal for push-pull switcher configurations in various applications requiring precise pulse width modulation control.
Median Price
$1.556
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$4.580
100+ parts
$3.000
1k+ parts
$2.480
10k+ parts
-
Rochester
$1.360
$1.130
$1.010
DigiKey
$1.700
Verical
$1.413
$1.262
Digiode
$1.112
DF Sales Co.
$1.600
Vyrian
Cyclops Electronics Ltd
Corphita
$1.053
Corohmni
$1.060
Vigor
$1.070
AZTECH Wire
$19.150
Perfect Parts
Continental Prestige Electronics
Problanco Electronics
Kulean Microsystems
TANS Electronics
Kepictronics
SupplyDigital Components
UHIMA Technologies
Microchip USA
Easy to mount on circuit boards, saving space and making assembly more efficient.
Square shape allows for a compact design, fitting well in tight spaces.
Having 40 terminals allows for more connections and flexibility in the circuit design.
This combination provides efficient heat dissipation and a slim profile, ideal for compact electronic devices.
Ability to operate at high temperatures ensures reliable performance even in demanding environments.
Voltage-mode control ensures stable and accurate output voltage regulation.
Can operate in low-temperature conditions without any issues, enhancing the product's reliability.
Tin finish on terminals provides good conductivity and corrosion resistance.
Quad terminal position allows for easy soldering and secure connections.
Low seated height makes the product suitable for slim and compact designs.
Compact width allows for easy integration into various electronic systems.
Switching controller type provides efficient power conversion and control.
Stable input voltage ensures reliable operation of the device.
Compact length enables the product to be accommodated in small spaces.
High switching frequency results in faster response times and efficient power delivery.
No lead terminals are environmentally friendly and easier to handle during assembly.
PWM control technique enables precise control of the output voltage.
Push-pull configuration improves efficiency and reduces electromagnetic interference.
Narrow terminal pitch allows for high-density mounting on PCBs.
Low minimum input voltage enables operation with a wide range of power sources.
Stable output voltage of 3.3V is suitable for powering various electronic components.
High maximum input voltage provides flexibility in the choice of power sources for the product.
Switching Regulators & Controllers NCP4201MNR2G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCP4201MNR2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 18/Oct/2016
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AH180-WG-7
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
Surge Components
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
IR1155STRPBF
Infineon Technologies
IR1155STRPBF by Infineon is a current-mode power factor controller with boost switcher config. Operating at 200 kHz, it has a nominal voltage of 15 V and max input voltage of 19 V. This small outline IC is ideal for switching regulators & controllers in applications requiring efficient power supplies.
LMR51420YDDCR
LMR51420YDDCR by Texas Instruments is a switching regulator with max output voltage of 34.2V and max current of 2A. Ideal for applications requiring pulse frequency modulation control technique, such as power management in compact electronic devices. Operates efficiently within temperature range of -40 to 150°C.
TPS61022RWUR
TPS61022RWUR by Texas Instruments is a switching regulator with a max output current of 10A and a max switching frequency of 1000kHz. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
LM2594M-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2574HVMX-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC33063ADR2G
Shenzhen Changyuntong Ic Design
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM22675MRE-5.0/NOPB
LM22675MRE-5.0/NOPB by Texas Instruments is a VOLTAGE-MODE switching regulator with 1A output current, ideal for automotive applications. It operates b/w -40 to 125°C, supporting input voltages from 4.5V to 42V and providing a stable output of 5V at up to 500kHz switching frequency.
TPS55340RTER
TPS55340RTER by Texas Instruments is a switching regulator with 16 terminals, operating temperature range of -40 to 150°C, and output voltage range from 3V to 38V. Ideal for automotive applications, it features a current-mode control technique and can handle up to 7.75A output current at a max frequency of 1200 kHz.
LM2671M-5.0/NOPB
LM2671M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a nominal output voltage of 5V, suitable for automotive applications. It operates b/w -40 to 125°C, has a buck switcher configuration, and supports pulse width modulation control technique up to 400kHz frequency.
LM5008AMM/NOPB
LM5008AMM/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output current up to 0.35A. It is ideal for automotive applications due to its small outline, thin profile package style, and wide input voltage range from 6V to 95V. With a max output voltage of 75V and switching frequency of 600kHz, it offers efficient buck configuration for various power supply needs.
LM2575T-15G
LM2575T-15G by Onsemi is a BIPOLAR SWITCHING REGULATOR with 3.2A output current, VOLTAGE-MODE control mode, and 63 kHz switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and 18-40V input voltage support.
MCP16301T-I/CHY
Microchip Technology
MCP16301T-I/CHY by Microchip: Switching Regulator, 85°C max temp, 2-15V output range. Ideal for industrial applications requiring current-mode control with a 550 kHz switching frequency and 0.6A output current. Small outline package with low profile and shrink pitch design for space-constrained setups.
TPS61170DRVR
TPS61170DRVR by Texas Instruments is a switching regulator with max output voltage of 38V, max output current of 1.44A, and max switching frequency of 1200kHz. Ideal for industrial applications requiring a compact design and efficient power management in temperature ranges from -40 to 85°C.
SG3525AN
SG3525AN by Texas Instruments is a dual switching controller with voltage-mode control. It operates b/w 0-70°C, has a max switching frequency of 400 kHz, and can output up to 0.1A. Commonly used in switching regulators & controllers for various applications.
LM2596SX-3.3/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS552882RPMR
TPS552882RPMR by Texas Instruments is a switching regulator with 26 terminals, operating temperature range of -40 to 125°C. It features a current-mode control mode, pulse width modulation technique, and buck-boost switcher configuration. Ideal for automotive applications due to its compact chip carrier package style and wide input voltage range of 2.7V to 36V.
MC33063ADG
LM5017MRX/NOPB
LM5017MRX/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output voltage up to 90V. It is ideal for automotive applications due to its small size, high efficiency (up to 0.6A output current), and wide input voltage range from 7.5V to 100V.
TPS63020DSJR
TPS63020DSJR by Texas Instruments is a switching regulator with 14 terminals, operating b/w -40 to 85°C. It offers a wide input voltage range of 1.8-5.5V and output voltage from 1.2-5.5V, supporting up to 4.5A output current for industrial applications requiring efficient power management in compact spaces at high frequencies up to 2600kHz.
LTM4622IY#PBF
Analog Devices
Analog Devices' LTM4622IY#PBF is a 25-terminal switching regulator with a max operating temperature of 125°C. It features current-mode control, pulse width modulation, and a buck switcher configuration. Ideal for automotive applications with input voltage ranging from 3.6V to 20V and a max switching frequency of 1MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP4306AAHZZZADR2G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP4200MNR2G
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCP43080ADR2G
NCP4306AAAZZZADR2G
NCP43080DDR2G
NCP4304ADR2G
NCP4304ADR2G by Onsemi is a switching controller with a max switching frequency of 500 kHz and a buck-boost switcher configuration. It has a max input voltage of 30V, making it suitable for various applications requiring efficient power management in small outline packages.
NCP4306AAAZZZAMNTWG
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCP4306AAAZZZAMN1TBG
NCP4306AAAZZZAMN1TBG by Onsemi is a switching regulator with a nominal voltage of 12V. It has a max operating temperature of 125°C and a min operating temperature of -40°C. The package style is small outline with a very thin profile, and it has 8 terminals. The max switching frequency is 1000 kHz and the max supply current is 2.2 mA. This regulator is commonly used in automotive applications.
NCP4306AADZZZAMNTWG
NCP4306DADZZDASNT1G
NCP4306DADZZDASNT1G by Onsemi is a switching controller with 12V nominal voltage, 1000 kHz max switching frequency, and -40 to 125°C operating temp range. Ideal for automotive applications due to its small outline, thin profile package style and buck-boost switcher configuration.
NCP43080DMTTWG
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: VSON; Package Shape: SQUARE; Surface Mount: YES;
NCP4306AADZZZADR2G
NCP43080AMTTWG
NCP43080AMTTWG by Onsemi is a switching controller with a nominal input voltage of 12V and operating temperature range from -40 to 125°C. It features resonant control technique, suitable for automotive applications due to its small outline package style and wide input voltage range of 4.2-35V. With surface mount capability and dual terminals, it offers efficient power management in compact designs.
NCP4302ADR2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING;
NCP4304BMNTWG
SWITCHING CONTROLLER; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1;
NCP4302BDR2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE;
NCP4305ADR2G
NCP4305ADR2G by Onsemi is a switching controller with 8 terminals, operating at -40 to 125°C. It has a max input voltage of 35V and supports resonant control up to 500 kHz frequency. Ideal for automotive applications due to its small outline package and matte tin finish.
NCP4305AMTTWG
NCP4303ADR2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved