Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP43080DDR2G by Onsemi is a switching controller with input voltage range of 4.2V to 35V, ideal for automotive applications. It features resonant control technique, operates b/w -40°C to 125°C, and comes in a small outline package style.
Median Price
$0.520
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$0.140
100+ parts
$0.134
1k+ parts
$0.129
10k+ parts
-
Mouser Electronics
$0.640
$0.383
DigiKey
$0.780
$0.440
$0.378
Verical
$0.434
$0.387
Rochester
$0.418
$0.347
$0.309
Chip1Stop
RS (Exports)
$0.607
$0.395
$0.381
Nova Conductors
Digiode
$0.570
Chip Stock
NAC Semi
$0.469
Vyrian
Cyclops Electronics Ltd
Ampacity Inc.
$0.093
Semicontronic
$0.091
$0.090
Corohmni
$0.259
Continental Prestige Electronics
$0.409
Netroflash
Argo Parts USA
$0.405
Corphita
$0.540
Microchip USA
$2.461
Aztec Data Supply Inc.
$5.910
TANS Electronics
Lixinc
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
UHIMA Technologies
Plastic/Epoxy package body material provides durability and reliability for the product.
Surface mount capability allows for easy and efficient installation on circuit boards.
Rectangular package shape is commonly used and easy to handle during manufacturing and assembly processes.
Having 8 terminals allows for multiple connections and flexibility in usage.
High maximum operating temperature ensures stable performance even in demanding conditions.
Low minimum operating temperature ensures functionality in a wide range of environments.
Matte Tin terminal finish provides good conductivity and solderability.
Dual terminal position offers versatility in circuit design and connection options.
Low maximum seated height allows for compact and space-saving design.
Narrow width makes the product suitable for applications with limited space.
Switching Controller design provides efficient power management and control.
12V nominal input voltage is common and suitable for a variety of applications.
Short reflow time helps in avoiding thermal stress on components during assembly.
High peak reflow temperature ensures proper solder reflow and reliable connections.
Compact length adds to the space-saving design of the product.
Automotive temperature grade ensures the product can withstand harsh temperature conditions in vehicles.
Gull Wing terminal form offers ease of soldering and strong mechanical connections.
Resonant control technique provides efficient power conversion and reduced energy loss.
Fine terminal pitch allows for high-density mounting on PCBs.
MSL level 3 indicates the product can withstand standard moisture exposure levels during storage and handling.
Low minimum input voltage allows for operation in low-power scenarios.
High maximum input voltage provides flexibility and compatibility with various power sources.
Switching Regulators & Controllers NCP43080DDR2G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Additional Features:
Other IC type:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCP43080DDR2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Wire Conversion 05/Nov/2021
PCN Assembly/Origin - Assembly Change 24/Jun/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
BSS138K-13
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
Sensitron Semiconductor
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
MC34063ABN
STMicroelectronics
MC34063ABN by STMicroelectronics is an 8-terminal switching regulator with a max output current of 1.5A and a boost switcher configuration. Operating b/w -40 to 85°C, it has a voltage-mode control mode and supports input voltages from 3V to 40V. Ideal for industrial applications requiring efficient power conversion up to 100kHz frequency.
MC34063ADG
Shenzhen Changyuntong Ic Design
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5007SDX/NOPB
LM5007SDX/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating at -40 to 125°C. It has a max output voltage of 73V and can handle up to 0.5A output current. Ideal for automotive applications due to its small size, high efficiency (800 kHz), and wide input voltage range of 9-75V.
LM2576T-ADJ
Motorola
SWITCHING REGULATOR; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO; Switcher Config: BUCK;
TPS61200DRCR
TPS61200DRCR by Texas Instruments is a switching regulator with a nominal input voltage of 1.2V and max output voltage of 5.5V, suitable for battery charge control applications. It operates in boost configuration with a max output current of 1.5A and features pulse width modulation control technique, making it ideal for industrial use at temperatures ranging from -40 to 85°C.
LTM8074IY#PBF
Analog Devices
LTM8074IY#PBF by Analog Devices is a switching regulator with 25 terminals, operating temperature range of -40 to 125°C, and max frequency of 2200 kHz. Ideal for automotive applications due to its fine pitch grid array package style and pulse width modulation control technique.
TPS55340PWP
TPS55340PWP by Texas Instruments is a switching regulator with 14 terminals, operating at -40 to 150°C. It offers a current-mode control technique, PWM mode, and buck-boost configuration. Ideal for automotive applications due to its wide input voltage range of 2.9V to 32V and high output current capability of 7.75A.
LMZ14201TZ-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: SINGLE; Control Mode: VOLTAGE-MODE;
LM2596DSADJG
LM2596DSADJG by Onsemi is a 5-terminal switching regulator with voltage-mode control. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 7.5A and a buck switcher configuration, it supports input voltages from 4.5V to 40V, making it ideal for various power supply designs.
LT1054IS8#PBF
LT1054IS8#PBF by Analog Devices is a small outline switched capacitor regulator with 8 terminals. It operates b/w -40 to 85°C, has a max input voltage of 15V, and nominal output voltage of -5V. Ideal for industrial applications requiring a compact, high-frequency bipolar technology-based switching regulator.
LM2596SX-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN5331SX
FAN5331SX by Onsemi is a small outline, low profile switching regulator with 5 terminals. It operates b/w -40 to 85°C and supports input voltage range of 2.7-5.5V. With a max output current of 1A and PWM control technique, it's ideal for boost applications in industrial settings.
PLM5164QDDATQ1
PLM5164QDDATQ1 by Texas Instruments is a switching regulator with 8 terminals, operating at -40 to 150°C. It supports input voltage range of 6-100V and output voltage from 1.2-90V, delivering up to 1A current at a frequency of 1000kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LM2675N-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LMR50410XFDBVR
LMR50410XFDBVR by Texas Instruments is a switching regulator with 1A output current, 12V nominal input voltage, and 700kHz max switching frequency. Ideal for automotive applications due to its low profile design and wide operating temperature range from -40°C to 150°C.
TPS560430XFDBVR
TPS560430XFDBVR by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 24V, current-mode control, and pulse width modulation technique. Ideal for automotive applications due to its compact size (2.9mm x 1.6mm) and high switching frequency of 2100 kHz.
ICL7660SCBAZ-T
Renesas Electronics
Renesas Electronics ICL7660SCBAZ-T is a CMOS switched capacitor converter with 8 terminals in a small outline package. It operates b/w 0-70°C, accepts input voltage from 1.5-12V, and has peak reflow temp of 260°C. Ideal for applications requiring efficient voltage conversion in compact spaces.
FAN2001MPX
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LM2576T-ADJ by Texas Instruments is a switching regulator with max output voltage of 37V and max output current of 7.5A. It operates b/w -40 to 125°C, suitable for automotive applications. Control mode is voltage-mode PWM with a switching frequency of up to 63kHz, ideal for buck configuration.
TPS61022RWUR
TPS61022RWUR by Texas Instruments is a switching regulator with a max output current of 10A and a max switching frequency of 1000kHz. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP4306AAHZZZADR2G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP4200MNR2G
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCP43080ADR2G
NCP4306AAAZZZADR2G
NCP4304ADR2G
NCP4304ADR2G by Onsemi is a switching controller with a max switching frequency of 500 kHz and a buck-boost switcher configuration. It has a max input voltage of 30V, making it suitable for various applications requiring efficient power management in small outline packages.
NCP4306AAAZZZAMNTWG
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCP4306AAAZZZAMN1TBG
NCP4306AAAZZZAMN1TBG by Onsemi is a switching regulator with a nominal voltage of 12V. It has a max operating temperature of 125°C and a min operating temperature of -40°C. The package style is small outline with a very thin profile, and it has 8 terminals. The max switching frequency is 1000 kHz and the max supply current is 2.2 mA. This regulator is commonly used in automotive applications.
NCP4306AADZZZAMNTWG
NCP4306DADZZDASNT1G
NCP4306DADZZDASNT1G by Onsemi is a switching controller with 12V nominal voltage, 1000 kHz max switching frequency, and -40 to 125°C operating temp range. Ideal for automotive applications due to its small outline, thin profile package style and buck-boost switcher configuration.
NCP43080DMTTWG
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: VSON; Package Shape: SQUARE; Surface Mount: YES;
NCP4306AADZZZADR2G
NCP43080AMTTWG
NCP43080AMTTWG by Onsemi is a switching controller with a nominal input voltage of 12V and operating temperature range from -40 to 125°C. It features resonant control technique, suitable for automotive applications due to its small outline package style and wide input voltage range of 4.2-35V. With surface mount capability and dual terminals, it offers efficient power management in compact designs.
NCP4302ADR2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING;
NCP4304BMNTWG
SWITCHING CONTROLLER; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1;
NCP4302BDR2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE;
NCP4305ADR2G
NCP4305ADR2G by Onsemi is a switching controller with 8 terminals, operating at -40 to 125°C. It has a max input voltage of 35V and supports resonant control up to 500 kHz frequency. Ideal for automotive applications due to its small outline package and matte tin finish.
NCP4305AMTTWG
NCP4201MNR2G
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCP4303ADR2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved