Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
TDA19997HL/C1,518
NXP Semiconductors
TDA19997HL/C1,518 by NXP Semiconductors is a versatile CMOS multiplexer designed for surface mount applications. It operates at 1.8V and 3.3V with a max temp of 70 °C, featuring a compact flatpack design with 100 gull-wing terminals. Ideal for commercial use in electronic devices requiring efficient signal switching.
S-PQFP-G100
100
70 Cel
0 Cel
PLASTIC/EPOXY
QFP
QFP100,.63SQ,20
SQUARE
FLATPACK
1.8,3.3
Not Qualified
Multiplexer or Switches
YES
CMOS
COMMERCIAL
GULL WING
.5 mm
QUAD
TDA19997HL/C1,551
TDA19997HL/C1,551 by NXP Semiconductors is a versatile CMOS multiplexer designed for surface mount applications. It operates at power supplies of 1.8V and 3.3V, with a max temp of 70 °C and features a compact flatpack design with 100 terminals. Ideal for commercial use in various electronic devices, it ensures reliable performance in demanding environments.
TDA19997HL/C1,557
TDA19997HL/C1,557 by NXP Semiconductors is a CMOS multiplexer designed for surface mount applications. It operates at power supplies of 1.8V and 3.3V, with a max temp of 70 °C and features a compact flatpack design with 100 terminals. Ideal for commercial use in electronic devices requiring efficient signal switching.
NX3L2467HR,115
NX3L2467HR,115 by NXP Semiconductors is a CMOS DPDT switch with 2 functions and 16 terminals. It operates at temperatures ranging from -40 to 125 °C and has a max on-state resistance of 4.1 ohm. Ideal for automotive applications due to its nickel palladium gold finish and break-before-make switching capability.
DPDT
S-PQCC-N16
e4
1
2
16
4.1 ohm
125 Cel
-40 Cel
SEPARATE OUTPUT
QCCN
LCC16,.12SQ,20
CHIP CARRIER
260
1.5/3.3
90 ns
BREAK-BEFORE-MAKE
AUTOMOTIVE
NICKEL PALLADIUM GOLD
NO LEAD
30
NX3L4051HR-Q100X
NX3L4051HR-Q100X by NXP Semiconductors is an AEC-Q100 qualified single-ended multiplexer with 8 channels and a max on-state resistance of 4.1 ohm. It operates at temperatures ranging from -40 to 125 °C, making it suitable for automotive applications. With a switching voltage of BREAK-BEFORE-MAKE, this CMOS technology chip carrier is ideal for automotive electronics requiring high reliability.
SINGLE-ENDED MULTIPLEXER
8
1.4/4.3
AEC-Q100
.006 mA
100 ns
NX3L4053HR-Q100X
NX3L4053HR-Q100X by NXP Semiconductors is a CMOS SPDT multiplexer designed for automotive applications, featuring a max operating temp of 125 °C and AEC-Q100 screening. It offers 3 functions with a low on-state resistance of 4.2Ω and operates b/w 1.4V to 4.3V. Ideal for compact designs, it supports fast switching with a max switch-on time of just 90ns.
SPDT
3
4.2 ohm
CBTL06141EE/G,118
CBTL06141EE/G,118 by NXP Semiconductors is a versatile multiplexer with 4 channels and operates at a nominal voltage of 3.3 V. It features a fine pitch grid array package and supports temperatures from -10 °C to 85 °C. Ideal for compact electronic applications requiring efficient signal routing.
S-PBGA-B48
4
48
85 Cel
-10 Cel
FBGA
BGA48,9X9,20
GRID ARRAY, FINE PITCH
3.3
1 mA
3.3 V
OTHER
BALL
BOTTOM
ADN4605ABPZ
Analog Devices
ADN4605ABPZ by Analog Devices is a 352-terminal cross point switch in a plastic/epoxy package with matte tin finish. It can withstand peak reflow temperature of 260°C for up to 30s. Ideal for high-density routing applications requiring precise signal switching.
CROSS POINT SWITCH
S-PBGA-B352
e3
352
GRID ARRAY
MATTE TIN
ADG1411WBCPZ-REEL
ADG1411WBCPZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, operating at -40 to 125 °C. It has a max on-state resistance of 5.4 ohm and switching voltage of +-5/12/+-15 V. Ideal for automotive applications requiring high isolation and fast switching times.
SPST
S-XQCC-N16
4 mm
-16.5 V
-4.5 V
-5 V
NC
80 dB
.13 ohm
5.4 ohm
UNSPECIFIED
HVQCCN
LCC16,.16SQ,25
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
+-5/12/+-15
1 mm
16.5 V
4.5 V
5 V
380 ns
510 ns
.65 mm
ADG5404BCPZ-REEL7
ADG5404BCPZ-REEL7 by Analog Devices is a CMOS single-ended multiplexer with 4 channels. It operates at -40 to 125 °C and supports supply voltages of +-9/+-22/9/40 V. With a max on-state resistance of 16 ohm, it is ideal for automotive applications requiring fast switching times.
-22 V
-9 V
-15 V
78 dB
.7 ohm
16 ohm
+-9/+-22/9/40
.8 mm
.03 A
22 V
9 V
15 V
183 ns
278 ns
ADG5408BCPZ-REEL7
ADG5408BCPZ-REEL7 by Analog Devices is an 8-channel single-ended multiplexer with a max on-state resistance of 22 ohm. It operates at a temperature range of -40 to 125 °C and has a switching voltage of +-9/+-22/9/40 V, making it ideal for automotive applications requiring precise signal routing.
60 dB
.8 ohm
22 ohm
.13 mA
198 ns
242 ns
ADG5409BCPZ-REEL7
ADG5409BCPZ-REEL7 by Analog Devices is a CMOS differential multiplexer with 4 channels. It operates at -40 to 125 °C and supports supply voltages of +-9/+-22/9/40 V. With a max on-state resistance of 22 ohm, it is ideal for automotive applications requiring precise signal switching in compact spaces.
DIFFERENTIAL MULTIPLEXER
ADV3205JSTZ
The Analog Devices ADV3205JSTZ is a 16-channel cross point switch with a 5V nominal voltage. It features a low profile flatpack package, matte tin terminal finish, and operates b/w -4.5°C to 70°C. Ideal for applications requiring high off-state isolation and separate output voltages in commercial temperature grades.
14 mm
-5.5 V
100 dB
LFQFP
FLATPACK, LOW PROFILE, FINE PITCH
+-5
1.6 mm
5.5 V
BIPOLAR
HD3SS212ZQER
Texas Instruments
HD3SS212ZQER by Texas Instruments is a 48-terminal differential multiplexer with a supply voltage range of 3-3.6V, on-state resistance of 12 ohm, and max operating temperature of 85°C. It is ideal for industrial applications requiring common output switching in compact designs with minimal power consumption.
e1
5 mm
NO
22 dB
1.5 ohm
12 ohm
COMMON OUTPUT
BGA
.74 mm
5 mA
3.6 V
3 V
350 ns
INDUSTRIAL
TIN SILVER COPPER
HD3SS212ZQET
HD3SS212ZQET by Texas Instruments is a 48-terminal differential multiplexer with a 3.3V supply voltage, suitable for industrial applications. It features a max on-state resistance of 12 ohm, fast switch-on/off times of 350 ns, and offers common output functionality. The package is a square grid array made of plastic/epoxy material, with surface mount capability and compact dimensions of 5mm x 5mm x 1mm.
NX3DV3899HR,115
NX3DV3899HR,115 from NXP Semiconductors is a versatile DPDT multiplexer designed for automotive applications. It features a max operating temp of 125 °C, operates b/w 1.4-4.3V, and has a low on-state resistance of just 10Ω. Ideal for efficient signal routing in compact designs.
10 ohm
Matte Tin (Sn)
NX3L2T384GM,125
NX3L2T384GM,125 from NXP Semiconductors is a CMOS SPDT switch with a max operating temp of 125 °C and low on-state resistance of 1.7Ω. It operates b/w 1.4V to 4.3V, making it ideal for automotive applications. Its compact design ensures efficient space utilization in circuits.
S-PQCC-N8
90 dB
.04 ohm
1.7 ohm
VQCCN
LCC8,.06SQ,20
CHIP CARRIER, VERY THIN PROFILE
4.3 V
1.4 V
1.65 V
60 ns
120 ns
NX3L4053HR,115
NX3L4053HR,115 from NXP Semiconductors is a CMOS SPDT multiplexer with a max on-state resistance of 4.2Ω and operates b/w -40 °C to 125 °C. It features 16 terminals in a no-lead chip carrier package, ideal for automotive applications. With separate outputs and fast switching (90 ns), it ensures reliable performance in compact designs.
NX3L4684TK,132
Multiplexers or Switches; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
S-PDSO-N10
3 mm
10
.15 ohm
HVSON
SOLCC10,.12,20
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
130 ns
DUAL
ADG786WBCPZ-REEL7
ADG786WBCPZ-REEL7 by Analog Devices is a 3-function multiplexer with 20 terminals, operating at -40 to 85 °C. It features a max on-state resistance of 4.5 ohm and switch-on time of 35 ns. Ideal for industrial applications requiring high-speed switching in compact designs.
5 VOLT NOMINAL VOLTAGE ALSO AVAILABLE
S-XQCC-N20
-2.75 V
-2.25 V
-2.5 V
20
72 dB
.1 ohm
4.5 ohm
2.75 V
2.25 V
2.5 V
16 ns
35 ns
Matte Tin (Sn) - annealed
ADG2128WBCPZ-REEL7
ADG2128WBCPZ-REEL7 by Analog Devices is a 32-terminal CMOS cross point switch with 12 channels. It operates b/w -40 to 85 °C and has a max on-state resistance of 75 ohm. Ideal for industrial applications requiring multiplexers & switches in compact square chip carrier packages.
ALSO HAS 12V SINGLE SUPPLY
S-XQCC-N32
12
32
75 ohm
ADN4600ACPZ-R7
ADN4600ACPZ-R7 by Analog Devices is an 8-channel cross point switch with a supply voltage range of 1.7V to 3.6V, operating b/w -40°C to 85°C. This surface-mount chip carrier has a compact square shape, featuring 64 terminals with a terminal pitch of 0.5mm suitable for industrial applications requiring high-density switching capabilities.
S-XQCC-N64
9 mm
64
1.7 V
1.8 V
TPS2065CDGN-2
TPS2065CDGN-2 by Texas Instruments is a small outline switch with common output, suitable for industrial applications. It operates b/w -40 to 125°C, with a max input voltage of 5.5V and min of 0V. The package style is thin profile, making it ideal for space-constrained designs.
0 V
S-PDSO-G8
HTSSOP
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
1.1 mm
.0002 mA
MAKE-BEFORE-BREAK
NICKEL PALLADIUM GOLD SILVER
DS90CP02SPX/NOPB
DS90CP02SPX/NOPB by Texas Instruments is a 28-terminal CMOS chip carrier with 3.3V supply, operating from -40 to 85°C. It features separate outputs, matte tin finish, and 0.5mm terminal pitch for industrial applications requiring a break-before-make cross point switch.
S-PQCC-N28
28
LCC28,.2SQ,20
150 ns
PCA9548ABSHP
NXP Semiconductors' PCA9548ABSHP is an 8-channel multiplexer with a supply voltage range of 2.3V to 5.5V, low on-state resistance of 55 ohm, and fast switch-on/off times of 0.3 ns. Ideal for applications requiring separate outputs in a compact square chip carrier package with surface mount capability.
S-PQCC-N24
24
55 ohm
LCC24,.16SQ,20
.1 mA
2.3 V
.3 ns
NB7L72MMNHTBG
Onsemi
NB7L72MMNHTBG by Onsemi is a 16-terminal chip carrier with a nominal voltage of 2.5V and operating temperature range of -40 to 85°C. It is a cross point switch with separate outputs, suitable for industrial applications requiring precise signal routing in compact spaces.
ALSO OPERATES IN SUPPLY VOLTAGE 3 TO 3.6V WITH 3.3V NOMINAL
2.5/3.3
2.625 V
2.375 V
NICKEL GOLD PALLADIUM
ADW54012Z-0REEL7
ADW54012Z-0REEL7 by Analog Devices is a 32-terminal CMOS cross point switch with 8 channels. It operates at -40 to 85 °C, with a max on-state resistance of 75 ohm and off-state isolation of 66 dB. Ideal for industrial applications requiring fast switching times and precise signal routing in compact spaces.
CAN ALSO OPERATES AT 12 V SUPPLY
66 dB
255 ns
215 ns
ADG5421BRMZ
ADG5421BRMZ by Analog Devices is a CMOS SPST switch with 2 functions, operating at -40 to 125°C. It has a max on-state resistance of 15 ohm and switching voltage of ±9/±22/9/40 V. Ideal for automotive applications due to its small outline package and separate output feature.
S-PDSO-G10
15 ohm
TSSOP
TSSOP10,.19,20
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
370 ns
ADG5423BRMZ
ADG5423BRMZ by Analog Devices is a dual-function SPST switch with 15V nominal voltage. With 370ns max switch-on time, it's ideal for automotive applications requiring -40 to 125 °C operating temperature range and 1.1mm seated height.
NO/NC
HD3SS213ZQER
HD3SS213ZQER by Texas Instruments is a 4-channel differential multiplexer with a nominal voltage of 3.3V and max operating temperature of 105°C. It features a grid array package style, very thin profile, and fine pitch terminals, making it suitable for industrial applications requiring common output and low supply current of 5mA.
S-PBGA-B50
105 Cel
VFBGA
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
ADN4612ACPZ
ADN4612ACPZ by Analog Devices is a 12-channel cross point switch with a supply voltage range of 2.25V to 2.75V. It operates in industrial temperature grade from -40°C to 85°C, making it suitable for various multiplexing and switching applications. This surface-mount chip carrier has a compact square package style with very thin profile, ideal for space-constrained designs.
ALSO REQUIRED ANALOG REFERENCE VOLTAGE 1.6 TO 2V
S-XQCC-N88
12 mm
88
.85 mm
ADG528AKP
ADG528AKP by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at a nominal voltage of +/-15V and has a max on-state resistance of 450 ohm. With a package style of chip carrier, it is ideal for industrial applications requiring precise signal switching in a compact form factor.
S-PQCC-J20
e0
8.965 mm
-10.8 V
68 dB
5 ohm
450 ohm
QCCJ
LDCC20,.4SQ
225
12/+-15
4.57 mm
.02 A
1.5 mA
10.8 V
300 ns
TIN LEAD
J BEND
1.27 mm
MAX306EQI
Maxim Integrated
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE; Surface Mount: YES;
S-PQCC-J28
11.505 mm
-20 V
69 dB
100 ohm
LDCC28,.5SQ
20 V
200 ns
ADG506ATE/883B
ADG506ATE/883B by Analog Devices is a MIL-STD-883 Class B-rated CMOS multiplexer with 16 channels. It operates at temperatures from -55 to 125 °C and has a max on-state resistance of 450 ohm. Ideal for military applications requiring high reliability and low power consumption.
S-CQCC-N28
11.43 mm
22.5 ohm
-55 Cel
CERAMIC, METAL-SEALED COFIRED
LCC28,.45SQ
12/15,GND/-12/-15
MIL-STD-883 Class B
2.54 mm
MILITARY
GOLD
AD7592DITE/883B
AD7592DITE/883B by Analog Devices is a CMOS SPDT chip carrier with 20 terminals, operating at -55 to 125 °C. It has separate outputs, 90 ohm Ron, and 350 ns switch times. Ideal for military applications requiring high isolation and fast switching capabilities in a compact form factor.
OVERVOLTAGE PROTECTION
S-CQCC-N20
8.89 mm
85 dB
2 ohm
90 ohm
LCC20,.35SQ
+-15
AD7590DITE/883B
AD7590DITE/883B by Analog Devices is a CMOS SPST chip carrier with 4 functions, -55 to 125 °C operating temp, and 1mA max supply current. Ideal for military applications requiring separate output switches with 90 ohm on-state resistance and 85dB isolation at +-15V supplies.
400 ns
250 ns
MAX396EQI
-8 V
-3 V
75 dB
1.8 ohm
+-2.7/+-8/2.7/16
.001 mA
8 V
ADG406BP
ADG406BP by Analog Devices is a 16-channel single-ended multiplexer with 80 ohm max on-state resistance. It operates at -40 to 85 °C and supports a supply voltage range of +-15 V. Ideal for industrial applications requiring high-speed switching with low signal current requirements.
CAN ALSO OPERATE WITH SINGLE 12V SUPPLY
-13.5 V
4 ohm
80 ohm
13.5 V
BICMOS
MAX322CUA
MAX322CUA by Maxim Integrated is a 2-function multiplexer with 8 terminals, operating at -40 to 85°C. It has a supply voltage range of ±5V and on-state resistance of 35Ω. Ideal for applications requiring high-speed switching in compact designs.
-2.7 V
.3 ohm
35 ohm
TSSOP8,.19
2.7 V
MAX321CUA
SPST; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ADG419BR-REEL
ADG419BR-REEL by Analog Devices is an 8-terminal SPDT multiplexer with a max on-state resistance of 35 ohm. Operating at -40 to 85 °C, it has a switching time of 160 ns and offers 80 dB off-state isolation. Ideal for industrial applications requiring precise signal routing in compact spaces.
ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY
SOP8,.25
240
5,12/+-15
1.09 mm
160 ns
MAX4544CUA
SPDT; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
76 dB
60 ohm
3.3/5
12 V
75 ns
MAX4544EUA
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
245
MAX4543EUA
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
MAX4529EUA
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
CAN ALSO OPERATE WITH SINGLE 5V SUPPLY
AUDIO/VIDEO SWITCH
70 ohm
3/5/+-5
MAX459CQH
CROSS POINT SWITCH; Temperature Grade: COMMERCIAL; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE; Surface Mount: YES;
S-PQCC-J44
16.585 mm
44
LDCC44,.7SQ
5.25 V
4.75 V
MAX378MLP
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 20; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
-18 V
3000 ohm
.7 mA
18 V
500 ns
750 ns
ADG507ATE
ADG507ATE by Analog Devices is a CMOS differential multiplexer with 8 channels, on-state resistance of 450 ohm, and off-state isolation of 68 dB. It operates in military-grade temperature range from -55 to 125 °C and is ideal for signal switching applications requiring fast response times.
© 2023 All rights reserved
