Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
LB1838M-MPB-E
Onsemi
LB1838M-MPB-E by Onsemi is a Motion Control IC with 14 terminals, operating at -20 to 75 °C. It has a supply voltage range of 2.5V to 9V and max current of 18mA. Ideal for stepper motor control applications due to its compact size and bipolar technology.
ALSO REQUIRED SUPPLY VOLTAGE 1.8 TO 9 VOLT
STEPPER MOTOR CONTROLLER
R-PDSO-G14
e6
8 mm
3
1
14
75 Cel
-20 Cel
PLASTIC/EPOXY
LSSOP
SOP14,.25,40
RECTANGULAR
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
Not Qualified
1.7 mm
Motion Control Electronics
18 mA
9 V
2.5 V
3 V
YES
BIPOLAR
COMMERCIAL EXTENDED
Tin/Bismuth (Sn/Bi)
GULL WING
1 mm
DUAL
4.4 mm
L6205N
STMicroelectronics
STMicroelectronics L6205N is a Motion Control IC with 48V supply, 5.6A output current, and BCDMOS technology. Ideal for automotive applications, it features a rectangular package style with 20 terminals in an in-line configuration. Operating from -40 to 150°C, this stepper motor controller suits various motion control needs.
R-PDIP-T20
e3
20
150 Cel
-40 Cel
5.6 A
DIP
DIP20,.3
IN-LINE
48
5.1 mm
52 V
8 V
48 V
NO
BCDMOS
AUTOMOTIVE
TIN
THROUGH-HOLE
2.54 mm
7.62 mm
L6206N
L6206N by STMicroelectronics is a Motion Control IC with 24 terminals, operating voltage of 8-52V, and max output current of 5.6A. Ideal for automotive applications, this BCDMOS technology IC is designed for stepper motor control in a compact rectangular package.
R-PDIP-T24
31.75 mm
24
DIP24,.3
4.32 mm
MATTE TIN
L6207N
L6207N by STMicroelectronics is a robust stepper motor controller designed for automotive applications, operating b/w -40 °C and 150°C. It supports a nominal voltage of 48V and delivers up to 2.8A output current. Its compact design features a dual terminal layout in an in-line package.
2.8 A
L6208N
L6208N by STMicroelectronics is a Motion Control IC with 24 terminals, operating voltage range of 8-52V, and max output current of 5.6A. Ideal for automotive applications, this BCDMOS technology-based IC is designed for stepper motor control in various systems.
10 mA
L6235N
L6235N by STMicroelectronics is a Motion Control IC with 24 terminals, operating voltage range of 8-52V, and max output current of 5.6A. It is designed for automotive applications requiring precise control over brushless DC motors. The IC features BCDMOS technology, operates in temperatures from -40 to 150°C, and comes in an inline rectangular package style.
BRUSHLESS DC MOTOR CONTROLLER
12/52
BTS7750GP
Infineon Technologies
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 15; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Supply Voltage (Vsup): 3.2 V;
BRUSH DC MOTOR CONTROLLER
R-PSSO-G15
e0
21.6 mm
15
12 A
TO-263
SMALL OUTLINE
42 V
3.2 V
12 V
NMOS
TIN LEAD
1.4 mm
SINGLE
9.25 mm
NCV33033DWR2
NCV33033DWR2 by Onsemi is a Motion Control IC with 20V nominal voltage, suitable for automotive applications. It features a small outline package style, operates b/w -40 to 125 °C, and has a max output current of 0.1A. Ideal for brushless DC motor control in various electronic systems.
R-PDSO-G20
12.8 mm
125 Cel
.1 A
SOP
SOP20,.4
235
2.65 mm
22 mA
30 V
10 V
20 V
Tin/Lead (Sn/Pb)
1.27 mm
30
7.5 mm
NCV33035DWR2
NCV33035DWR2 by Onsemi is a motion control IC with a nominal voltage of 20V, suitable for automotive applications. It features a max output current of 0.1A and operates in temperatures ranging from -40 °C to 125°C. This bipolar technology IC comes in a small outline package with dual terminal position and gull wing form.
R-PDSO-G24
15.395 mm
SOP24,.4
20 mA
A3977SLPTR
Allegro MicroSystems
Allegro MicroSystems' A3977SLPTR is a Motion Control IC with 28 terminals, operating at -20 to 85°C. It supports stepper motor control, offering a max output current of 2.5A at a supply voltage range of 3-5.5V. The small outline package with gull wing terminals and thin profile makes it suitable for various motion control applications requiring precise voltage regulation and thermal management.
R-PDSO-G28
9.7 mm
28
85 Cel
2.5 A
HTSSOP
TSSOP28,.25
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
240
3.3/5,35
1.2 mm
5.5 V
5 V
OTHER
.65 mm
A3977SLP
Allegro MicroSystems' A3977SLP is a Motion Control IC with 28 terminals, operating at -20 to 85 °C. It supports a max output current of 2.5A and nominal voltage of 5V, suitable for Stepper Motor Controllers in various applications.
TPIC43T02DAR
Texas Instruments
TPIC43T02DAR by Texas Instruments is a Motion Control IC with 38 terminals, operating voltage of 24V, and temperature range of 0-70°C. It is a Brushless DC Motor Controller suitable for applications requiring precise motion control in commercial-grade environments.
R-PDSO-G38
e4
12.5 mm
38
70 Cel
0 Cel
TSSOP
TSSOP38,.32
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
220
28 V
18 V
24 V
COMMERCIAL
NICKEL PALLADIUM GOLD
6.2 mm
A3959SLBTR
Allegro MicroSystems' A3959SLBTR is a motion control IC with 24 terminals, suitable for stepper motor control. It operates at 5V with a max output current of 6A and can withstand temperatures from -20 to 85°C. The small outline package makes it ideal for surface mount applications in various industries.
15.4 mm
6 A
5
4.5 V
VN772K13TR
VN772K13TR by STMicroelectronics is a compact brush DC motor controller with a max output current of 12 A and operates b/w 5.5 V to 36 V. It features a small outline package (7.5 mm x 17.9 mm) for efficient surface mounting. Ideal for motion control applications, it ensures reliable performance in various devices.
17.9 mm
SOP28,.4
8/36
7 mA
36 V
13 V
Nickel/Palladium/Gold (Ni/Pd/Au)
VN772K
VN772K by STMicroelectronics is a versatile brush DC motor controller with a max output current of 12 A and operates b/w 5.5 V to 36 V. Its compact SO package (7.5 mm x 17.9 mm) ensures efficient surface mounting in motion control applications. Designed for reliability, it features nickel-palladium-gold terminals and a peak reflow temp of 250 °C.
250
L6258E
L6258E by STMicroelectronics is a versatile stepper motor controller designed for military applications. It operates at a nominal voltage of 5V, supports up to 1.5A output current, and functions effectively in temperatures ranging from -55 °C to 150 °C. Its compact SOIC package ensures efficient surface mounting for space-constrained designs.
R-PDSO-G36
15.9 mm
36
-55 Cel
1.5 A
SSOP
SSOP36,.56
SMALL OUTLINE, SHRINK PITCH
5,40
3.6 mm
5.25 V
4.75 V
MILITARY
11 mm
VN770K
STMicroelectronics' VN770K is a Motion Control IC with 28 terminals, operating voltage range of 8-36V. It's a Brush DC Motor Controller in small outline package suitable for applications requiring up to 12A output current and CMOS technology.
CMOS
A3967SLBTR
Allegro MicroSystems' A3967SLBTR is a Motion Control IC with 24 terminals, operating voltage of 3-5V, and max output current of 0.85A. Ideal for stepper motor control applications due to its compact size, dual terminal position, and tin lead finish.
.85 A
3.3/5
85 mA
L9949
L9949 by STMicroelectronics is a versatile motion control IC designed for brush DC motor applications. It operates at a nominal voltage of 5V, supports up to 10A output current, and features a compact SO package. Ideal for robotics and automation systems, it enhances performance in space-constrained designs.
10 A
SOP20,.56
245
5,8/16
Matte Tin (Sn) - annealed
ML4425CSX
Fairchild Semiconductor
Fairchild Semiconductor's ML4425CSX is a Motion Control IC with 28 terminals, operating at 12V. It features a small outline package style and is designed for Brushless DC Motor Controllers. With a temperature range of 0-70°C, it offers dual terminal position and Gull Wing form for optimal performance in commercial applications.
.05 A
260
12
2.72 mm
50 mA
13.2 V
10.8 V
Matte Tin (Sn)
TC642EOA
Microchip Technology
Microchip TC642EOA is a Motion Control IC with 8 terminals, operating voltage of 3.3/5V, and temp range of -40 to 85°C. Ideal for Brushless DC Motor control applications due to its small outline package and industrial temperature grade suitability. Features include matte tin terminal finish, dual position, and gull wing form factor.
R-PDSO-G8
4.9 mm
8
SOP8,.25
TS 16949
1.75 mm
1 mA
INDUSTRIAL
40
3.9 mm
TC646EOA
Microchip TC646EOA is a small outline motion control IC with 8 terminals, operating at -40 to 85°C. It supports supply voltages of 3-5V and has a max seated height of 1.75mm. Ideal for industrial applications requiring brushless DC motor control in compact designs.
TC647EOA
Microchip TC647EOA is a Motion Control IC with 8 terminals, operating at -40 to 85°C. It supports supply voltages of 3-5V and is ideal for Brushless DC Motor control applications. The small outline package measures 4.9mm x 3.9mm with a seated height of 1.75mm, making it suitable for industrial use in various motion control systems.
TC648EOA
Microchip TC648EOA is a Motion Control IC with 8 terminals, Vsup of 3.3/5V, and operates in industrial temperatures (-40 to 85°C). It's a Brushless DC Motor Controller with small outline package style for surface mount applications. Features include dual terminal position, matte tin finish, and low supply current (1mA).
TC649EOA
Microchip TC649EOA is a Motion Control IC with 8 terminals, operating voltage of 3.3/5V, and temp range of -40 to 85°C. Ideal for Brushless DC Motor control applications due to its small outline package and industrial temperature grade suitability. Features dual terminal position with gull wing form factor for surface mount assembly.
DRV10983PWP
DRV10983PWP by Texas Instruments is a Brushless DC Motor Controller with 24V nominal voltage and 3A max output current. This motion control IC is designed for automotive applications, featuring a small outline package with gull wing terminals and operating temperature range from -40 to 125°C.
7.8 mm
2
3 A
5 mA
DRV8802QPWPRQ1
DRV8802QPWPRQ1 by Texas Instruments is a Motion Control IC with 28 terminals, operating voltage range of 8.2V to 24V, and temp range of -40°C to 125°C. It is ideal for automotive applications requiring a brush DC motor controller in compact spaces due to its small outline package style.
AEC-Q100
45 V
8.2 V
DRV8833CPWP
DRV8833CPWP by Texas Instruments is a Motion Control IC with 16 terminals and a supply voltage range of 2.7V to 10.8V. It features a max output current of 1A, operating temperature range from -40°C to 85°C, and is ideal for brush DC motor control applications in industrial settings.
ALSO OPERATES WITH THE RANGE OF 0V TO 5.5V SUPPLY
R-PDSO-G16
5 mm
16
1 A
3 mA
2.7 V
NOT SPECIFIED
VN771K13TR
VN771K13TR by STMicroelectronics is a compact brush DC motor controller with a nominal voltage of 13V and supports up to 15A output current. It features a surface mount design in a small outline package, ideal for motion control applications. With a wide supply range of 5.5V to 36V, it ensures versatile usage in various electronic devices.
15 A
VN771K
VN771K by STMicroelectronics is a versatile brush DC motor controller designed for motion control applications. It operates with a supply voltage range of 5.5V to 36V and supports up to 15A output current. Its compact SO package ensures efficient surface mounting in various electronic designs.
NCV7701DWR2
NCV7701DWR2 by Onsemi is a Motion Control IC with 20 terminals, operating voltage range of 7-26V. It features BCDMOS technology, supports stepper motor control, and has a max output current of 5A. Ideal for automotive applications due to its temperature grade and small outline package style.
5 A
7/26
8 mA
26 V
7 V
14 V
NCV7701DW
NCV7701DW by Onsemi is a Motion Control IC with 20 terminals, BCDMOS technology, and 5A max output current. Ideal for automotive applications, it operates b/w -40 to 125 °C with Vsup ranging from 7V to 26V. This stepper motor controller in small outline package suits surface mount designs.
A3966SLBTR
Allegro MicroSystems' A3966SLBTR is a Motion Control IC with 16 terminals, operating voltage of 4.75-5.5V, and max output current of 0.75A. Ideal for stepper motor control applications due to its bipolar technology, small outline package style, and dual terminal position design.
ALSO REQUIRES VCC TO 30V VBB SUPPLY
10.3 mm
.75 A
SOP16,.4
L9935013TR
L9935013TR by STMicroelectronics is a versatile stepper motor controller designed for motion control applications. It operates at a nominal voltage of 5V, supports up to 2.5A output current, and features a compact 20-terminal package. Ideal for precise motor control in various electronic devices, it ensures efficient performance in tight spaces.
ALSO REQUIRES 8V TO 24V SUPPLY
HSOP
SMALL OUTLINE, HEAT SINK/SLUG
5,8/24
L6219DSTR
Allegro MicroSystems' L6219DSTR is a motion control IC with 24 terminals, operating voltage of 5-45V, and max output current of 1A. Ideal for stepper motor control applications, this bipolar technology IC has a temp range of -20 to 85°C and compact rectangular package style.
5,45
UDN2916LBTR
Allegro MicroSystems' UDN2916LBTR is a Motion Control IC with 24 terminals, operating voltage of 5V, and max output current of 1A. Ideal for stepper motor control applications, this bipolar technology IC has a small outline package and can operate in temperatures ranging from -20°C to 85°C.
ALSO REQUIRES 10V TO 45V VBB SUPPLY
L6225PD
STMicroelectronics L6225PD is a Motion Control IC with 48V supply voltage, suitable for automotive applications. It offers 2.8A max output current, BCDMOS technology, and operates b/w -40 to 150°C. The IC comes in a small outline package with gull wing terminals for surface mounting.
L6226N
L6226N by STMicroelectronics is a robust brushless DC motor controller designed for automotive applications. It operates b/w 8-52 V, supports up to 2.8 A output current, and withstands temperatures from -40 °C to 150 °C. Ideal for motion control in demanding environments.
L6226PD
L6226PD by STMicroelectronics is a Motion Control IC with 36 terminals, operating voltage of 8-48V, and max output current of 2.8A. Ideal for automotive applications, it features BCDMOS technology and can withstand temperatures from -40 to 150°C.
L6229N
STMicroelectronics L6229N is a Motion Control IC with 48V supply voltage, suitable for automotive applications. It features 2.8A max output current and BCDMOS technology. With a rectangular package style, it has 24 terminals in an in-line configuration.
L6229PD
L6229PD by STMicroelectronics is a robust brushless DC motor controller designed for automotive applications. It operates at a nominal voltage of 48V, supports up to 2.8A output current, and functions effectively in temperatures ranging from -40 °C to 150 °C. Its compact size and surface mount design make it ideal for space-constrained environments.
3.5 mm
L6227N
L6227N by STMicroelectronics is a robust stepper motor controller designed for automotive applications, operating b/w -40 °C and 150 °C. It supports a nominal voltage of 48V and delivers up to 2.8A output current. Its compact in-line package features 24 terminals for efficient integration.
L6228N
STMicroelectronics L6228N is a Motion Control IC with 48V supply voltage, 2.8A output current, and BCDMOS technology. Ideal for automotive applications, this stepper motor controller comes in a rectangular plastic/epoxy package with 24 terminals and operates b/w -40°C to 150°C temperature range.
L6258EX
L6258EX by STMicroelectronics is a versatile stepper motor controller designed for motion control applications. It operates at a nominal voltage of 5V, supports up to 1.5A output current, and features a compact 36-terminal package. Ideal for precise motor control in robotics and automation systems.
TC642BEPA
Microchip Technology's TC642BEPA is an 8-terminal Motion Control IC with a supply voltage range of 3-5V. Ideal for Brushless DC Motor control, it operates in industrial temperatures (-40 to 85°C) and has a max seated height of 4.32mm.
R-PDIP-T8
9.46 mm
DIP8,.3
.4 mA
TC647BEOA
Microchip TC647BEOA is a Motion Control IC with 8 terminals, operating voltage of 3.3-5V, and temp range -40 to 85°C. Ideal for Brushless DC Motor control applications due to small outline package and industrial temperature grade suitability. Features matte tin finish, gull wing terminals, and moisture sensitivity level of 3.
3.91 mm
TC647BEPA
Microchip TC647BEPA is an 8-terminal IC for motion control. Operates at 3-5V with temp range -40 to 85°C. Ideal for brushless DC motor control in industrial applications.
TC649BEOA
Microchip TC649BEOA is a Motion Control IC with 8 terminals, operating voltage of 3-5V. Ideal for Brushless DC Motor control applications. Features include small outline package, industrial temperature grade, and matte tin terminal finish.
© 2023 All rights reserved
