Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
SN74ABT162601DGG
Texas Instruments
SN74ABT162601DGG by Texas Instruments is an 18-bit bus driver with a propagation delay of 5.7 ns at 5V, featuring a small outline package for industrial applications. It offers a max I (ol) of 64A, operates b/w -40 to 85°C, and supports bidirectional data flow with independent control.
INDEPENDENT CONTROL
BIDIRECTIONAL
R-PDSO-G56
REGISTERED BUS TRANSCEIVER
64 Amp
18
1
56
85 Cel
-40 Cel
3-STATE
TRUE
PLASTIC/EPOXY
TSSOP
TSSOP56,.3,20
RECTANGULAR
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
5
36 mA
Not Qualified
Bus Driver/Transceivers
YES
INDUSTRIAL
GULL WING
.5 mm
DUAL
POSITIVE EDGE
74AVCH20T245DGV,11
NXP Semiconductors
BUS TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 56; Package Code: TSSOP; Package Shape: RECTANGULAR;
COMMON CONTROL
AVC
e3
11.3 mm
BUS TRANSCEIVER
6 Amp
10
2
125 Cel
TSSOP56,.25,16
TR
1.2/3.3
10.4 ns
1.2 mm
3.6 V
.8 V
1.1
CMOS
AUTOMOTIVE
MATTE TIN
.4 mm
1.2/3.3V&1.2/3.3V
4.4 mm
SN74ABT16543DGG
SN74ABT16543DGG by Texas Instruments is an 8-bit bus driver with a propagation delay of 5.1 ns and operates at a nominal voltage of 5V. It features a small outline package style, suitable for industrial applications requiring bidirectional control with independent control type.
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
ABT
e4
14 mm
50 pF
8
260
35 mA
5.6 ns
5.5 V
4.5 V
BICMOS
NICKEL PALLADIUM GOLD
30
N/A
6.1 mm
SN74LVC16543DGGR
SN74LVC16543DGGR by Texas Instruments is an 8-bit bus driver with 3.3V supply voltage, 9ns propagation delay, and 24A output current. It features a small outline package and is ideal for bidirectional control applications in industrial settings.
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH
LVC/LCX/Z
24 Amp
NOT SPECIFIED
3.3
9 ns
2.7 V
SN74LVT16952DGGR
SN74LVT16952DGGR by Texas Instruments is a Bus Driver & Transceiver with 8 bits, 3.3V supply voltage, and 5.8ns propagation delay. It features a small outline package, operates at -40 to 85°C, and has dual terminals for bidirectional control applications in industrial settings.
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; WITH CLOCK ENABLE
LVT
5 mA
7.1 ns
NO
SN74LVT16952DL
SN74LVT16952DL by Texas Instruments is a Bus Driver & Transceiver with 8 bits, 2 functions, and 3.3V nominal voltage. It features a propagation delay of 5.8 ns, operates at temperatures from -40 to 85°C, and has a max power supply current of 5 mA. Ideal for industrial applications requiring bidirectional control with positive edge trigger type.
18.415 mm
SSOP
SSOP56,.4
SMALL OUTLINE, SHRINK PITCH
TUBE
2.79 mm
Bus Driver/Transceiver
.635 mm
7.5 mm
SN74LVT16543DLR
SN74LVT16543DLR by Texas Instruments is an 8-bit bus driver with 3-STATE output characteristics. It has a propagation delay of 4.6 ns at 3.3V, making it suitable for bidirectional applications in industrial settings. This small outline package features dual terminal position and operates within a temperature range of -40 to 85°C.
7.8 ns
SN74ALVCH16646DLR
SN74ALVCH16646DLR by Texas Instruments is a bus driver with 8 bits, 3.9 ns propagation delay, and 24 Amp max I (ol). It is used for bidirectional control applications in industrial settings due to its positive edge trigger and 3-STATE output characteristics.
WITH DIRECTION CONTROL
ALVC/VCX/A
1.65 V
1.8
7.49 mm
SN74ALVCH16952DGGR
SN74ALVCH16952DGGR by Texas Instruments is a Bus Driver & Transceiver with 8 bits, 3.9 ns propagation delay, and 24 Amp max I (ol). It operates at a nominal voltage of 1.8V and is ideal for industrial applications requiring bidirectional control with positive edge trigger type.
.04 mA
4.6 ns
SN74ABT162460DL
SN74ABT162460DL by Texas Instruments is a 4-bit bus driver with 6.5ns propagation delay, suitable for industrial applications. It operates at a supply voltage of 5V and features a max power supply current of 32mA. With a small outline package style and dual terminal position, it offers bidirectional control in a compact form factor.
FIXED 4-TO-1 OR 1-TO-4 EXCHANGER; WITH CLOCK ENABLE; WITH MASTER OUTPUT ENABLE ON FOUR B PORTS
BUS EXCHANGER
4
3-STATE WITH SERIES RESISTOR
32 mA
7.7 ns
SN74ABT162827DL
SN74ABT162827DL by Texas Instruments is a 10-bit bus driver with 4.7 ns propagation delay at 5V, suitable for industrial applications. It features a small outline package with dual terminals and true output polarity, operating b/w -40 to 85°C. With a max supply voltage of 5.5V and 32mA power supply current, it offers reliable performance in various electronic systems.
WITH DUAL OUTPUT ENABLE
ENABLE LOW
BUS DRIVER
12 Amp
4.7 ns
SN74ALVC16501DL
SN74ALVC16501DL by Texas Instruments is an 18-bit bus driver with a supply voltage of 2.5V and operating temperature range of -40 to 85°C. It features a max output current of 24A, propagation delay of 6.7ns, and supports true output polarity. This device is ideal for bidirectional data transmission in industrial applications requiring independent control over two ports.
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
6.7 ns
2.3 V
2.5
74AC16823DL
74AC16823DL by Texas Instruments is a bus driver & transceiver with 9 bits, 3-STATE output, and 12.7 ns propagation delay at 5V. It is used in industrial applications for positive edge triggering with a max frequency of 115MHz.
WITH CLEAR AND CLOCK ENABLE
AC
115000000 Hz
9
3.3/5
12.7 ns
FF/Latches
3 V
74ACT16823DLR
74ACT16823DLR by Texas Instruments is a bus driver & transceiver with 9 bits, 12.9 ns propagation delay, and 3-state output characteristics. It operates at a supply voltage of 5V and has a max frequency of 90MHz. Ideal for industrial applications requiring high-speed data transmission in compact spaces.
UNIDIRECTIONAL
ACT
90000000 Hz
.08 mA
12.9 ns
74AC16646DL
74AC16646DL by Texas Instruments is a bus driver & transceiver with 8 bits, 3-STATE output, and 11.9 ns propagation delay. It operates at a supply voltage of 3.3/5V and has a max operating temperature of 85°C. Ideal for bidirectional data transmission in industrial applications requiring independent control.
DIRECTION CONTROL; SELECT INPUT FOR MULTIPLEXED TRANSMISSION OF REGISTERED OR REAL TIME DATA
11.9 ns
74ACT16648DL
74ACT16648DL by Texas Instruments is an 8-bit bus driver with a propagation delay of 11.2 ns and output current of 24 Amp. It features a small outline package, operates at temperatures from -40 to 85 °C, and is ideal for bidirectional control applications in industrial settings.
INVERTED
74ACT16825DLR
74ACT16825DLR by Texas Instruments is a bus driver & transceiver with 10.5 ns propagation delay, 9 bits, and 3-state output characteristics. It operates at a nominal voltage of 5V and is ideal for industrial applications requiring true output polarity and enable low control type.
10.3 ns
74ACT16827DLR
74ACT16827DLR by Texas Instruments is a Bus Driver & Transceiver with 10 bits, 11 ns propagation delay, and 24 Amp max I (ol). It is used in industrial applications for enabling low control type with a supply voltage range of 4.5V to 5.5V.
10.8 ns
74ACT16833DL
74ACT16833DL by Texas Instruments is a bus driver & transceiver with 8 bits, 2 functions, and 3-state output. It operates at a supply voltage of 5V, has a propagation delay of 10.7ns, and can handle load capacitance of 50pF. Ideal for bidirectional control applications in industrial settings due to its compact size and dual terminal position.
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; PARITY GENERATION A TO B; ERROR DETECTION B TO A
10.7 ns
74ACT16651DL
74ACT16651DL by Texas Instruments is a bus driver & transceiver with 8 bits and 2 functions. It has a propagation delay of 11.9 ns, operates at a supply voltage of 5V, and features a max I (ol) of 24 Amp. This component is ideal for applications requiring bidirectional control with positive edge trigger type in industrial temperature grades.
SELECT INPUT FOR MULTIPLEXED TRANSMISSION OF REGISTERED/REAL TIME DATA
13.6 ns
74AC16652DLR
74AC16652DLR by Texas Instruments is a bus driver & transceiver with 8 bits, 2 functions, and a propagation delay of 12.3 ns. It operates at a nominal voltage of 5V and has a max operating temperature of 85°C. Ideal for bidirectional applications requiring independent control in industrial settings.
12.3 ns
74ACT16652DLR
74ACT16652DLR by Texas Instruments is a Bus Driver & Transceiver with 8 bits, 11.6 ns propagation delay, and 24 Amp max I (ol). It operates at a supply voltage of 5V and has a temperature range of -40 to 85°C. Ideal for industrial applications requiring bidirectional control with independent control features.
74ACT16652DL
74ACT16652DL by Texas Instruments is a bus driver & transceiver with 8 bits, 2 functions, and a propagation delay of 11.6 ns at 5V. It features a small outline package style for industrial applications requiring bidirectional control with independent control capabilities.
74ACT16861DLR
The Texas Instruments 74ACT16861DLR is a bus driver & transceiver with 10 bits, 11.1 ns propagation delay, and 24 Amp max I (ol). It operates at a nominal voltage of 5V and is ideal for industrial applications requiring bidirectional control in a small outline package.
11.1 ns
74ACT16863DLR
74ACT16863DLR by Texas Instruments is a bus driver & transceiver with 9 bits, 11.8 ns propagation delay, and 24 Amp max I (ol). It operates at a supply voltage of 5V and has a temperature range of -40 to 85 °C. Ideal for bidirectional control applications in industrial settings due to its CMOS technology and independent control feature.
11.8 ns
74ACT16863DL
74ACT16863DL by Texas Instruments is a Bus Driver & Transceiver with 9 bits, 11.8 ns propagation delay, and 3-STATE output characteristics. It operates at a supply voltage of 5V and has a load capacitance of 50 pF. Ideal for bidirectional control applications in industrial settings due to its compact size and low power consumption.
74ACT16864DL
74ACT16864DL by Texas Instruments is a bus driver & transceiver with 9 bits, 11.3 ns propagation delay, and 24 Amp max I (ol). It operates at a supply voltage of 5V and has a temperature range of -40 to 85 °C. Ideal for bidirectional control applications in industrial settings due to its CMOS technology and compact design.
11.3 ns
74ACT16821DL
74ACT16821DL by Texas Instruments is a 10-bit bus driver with 2 functions, operating at a supply voltage of 5V. With a propagation delay of 14ns and max frequency of 70MHz, it is ideal for industrial applications requiring high-speed data transmission. This CMOS technology transceiver features dual terminal position and true output polarity in a small outline package.
70000000 Hz
14 ns
74ACT16841DLR
74ACT16841DLR by Texas Instruments is a Bus Driver & Transceiver with 10 bits, 2 functions, and a propagation delay of 12.2 ns at 5V. It features a small outline package style for industrial applications requiring true output polarity and dual terminal position.
SN74ABT18245ADGGR
SN74ABT18245ADGGR by Texas Instruments is a 9-bit bus driver with 5.4 ns propagation delay, suitable for industrial applications. It features a 3-STATE output and operates at temperatures ranging from -40 to 85 °C. The package style is small outline, thin profile, shrink pitch with dual terminal position.
BOUNDARY SCAN BUS TRANSCEIVER
38 mA
5.4 ns
SN74ABT18245ADL
SN74ABT18245ADL by Texas Instruments is a 9-bit bus driver with 5.4 ns propagation delay, suitable for industrial applications. It features 2 functions, operates at 5V, and has a max operating temperature of 85°C. With a compact design and dual terminal position, it offers efficient bidirectional control in various electronic systems.
SNJ54ABT18245AWD
SNJ54ABT18245AWD by Texas Instruments is a 9-bit bus driver with 5.4 ns propagation delay, suitable for military-grade applications. It features 3-STATE output characteristics, operates at temperatures from -55 to 125 °C, and has a max supply voltage of 5.5 V. Ideal for bidirectional data transmission in harsh environments requiring fast signal propagation.
R-GDFP-F56
e0
-55 Cel
CERAMIC, GLASS-SEALED
DFP
FL56,.4,25
FLATPACK
5.8 ns
MIL-PRF-38535
3.05 mm
MILITARY
TIN LEAD
FLAT
9.655 mm
SN74ABTH16460DLR
SN74ABTH16460DLR by Texas Instruments is a 4-bit bus driver with 6.5 ns propagation delay, suitable for industrial applications. It operates at a nominal voltage of 5V and features a max power supply current of 32mA. This device offers true output polarity and independent control, making it ideal for bidirectional data transmission in various electronic systems.
FIXED 4-TO-1 OR 1-TO-4 EXCHANGER
SN74ABTH16823DLR
SN74ABTH16823DLR by Texas Instruments is a 9-bit bus driver with 6.8 ns propagation delay, operating at 5V. It features a small outline package and supports up to 150MHz frequency. Ideal for industrial applications requiring independent control of two functions in a unidirectional manner.
150000000 Hz
80 mA
6 ns
SN74ABT162823ADLR
SN74ABT162823ADLR by Texas Instruments is a 9-bit bus driver with 3-state output and 7.5 ns propagation delay at 5V supply voltage. It features a small outline package, operates in industrial temperature range (-40 to 85 °C), and has a max frequency of 150 MHz. Ideal for applications requiring fast signal transmission in compact spaces.
7.5 ns
SN74ABT16853DLR
SN74ABT16853DLR by Texas Instruments is a Bus Driver & Transceiver with 8 bits, 4.3 ns propagation delay, and 50 pF load capacitance. It operates at a nominal voltage of 5V and has a max operating temperature of 85°C. Ideal for bidirectional applications requiring independent control in industrial settings.
40 mA
4.3 ns
SN74ABTH16260DL
SN74ABTH16260DL by Texas Instruments is a 12-bit bus driver with 3-STATE output characteristics. It operates at a nominal voltage of 5V and has a max I (ol) of 64A, with a propagation delay of 5.3ns. This industrial-grade transceiver is ideal for applications requiring high-speed data transmission in harsh environments.
12
3
63 mA
5.3 ns
Other Logic ICs
SN74ABT16841DL
SN74ABT16841DL by Texas Instruments is a 10-bit bus driver with 5.1ns propagation delay, suitable for industrial applications. It operates at a nominal voltage of 5V, has a max operating temperature of 85°C, and features dual terminal position with GULL WING form factor.
TYP VOLP < 0.8V @ VCC = 5V, TA = 25 DEG C
ENABLE LOW/HIGH
89 mA
5 ns
SN74LVCH16652ADLR
SN74LVCH16652ADLR by Texas Instruments is a bus driver with 8 bits, 2 functions, and 3-state output. It operates at a supply voltage of 1.8V to 3.6V, with propagation delay of 6.3ns and max I (ol) of 24Amp. Ideal for bidirectional communication in industrial applications due to its compact size and independent control feature.
7.3 ns
SN74ABT16601DLR
SN74ABT16601DLR by Texas Instruments is an 18-bit bus driver with a propagation delay of 4.6 ns, operating at a supply voltage of 5V. It features a 3-STATE output and is ideal for industrial applications requiring bidirectional control in a small outline package.
SN74ABT16863DLR
SN74ABT16863DLR by Texas Instruments is a 9-bit bus driver with 3.9 ns propagation delay, suitable for industrial applications. It features a 5V nominal voltage, 50 pF load capacitance, and operates in temperatures ranging from -40 to 85°C. This dual-function transceiver has a small outline package style and supports independent control.
18.41 mm
3.9 ns
SNJ54FB2040WD
SNJ54FB2040WD by Texas Instruments is an 8-bit bus driver with a propagation delay of 18ns at 5V. It features BTL & TTL translation, open-collector/3-state output characteristics, and operates in a temperature range of -55 to 125°C. Ideal for military applications requiring independent control and dual terminal position.
COMPATIBLE WITH IEEE 1194.1 BTL & 896.2 FUTUREBUS+ STANDARDS; WITH DESIGNATED TTL AND BTL PORTS
FB
18.288 mm
30 pF
100 Amp
OPEN-COLLECTOR/3-STATE
70 mA
18 ns
5.25 V
4.75 V
TTL
BTL & TTL
9.652 mm
SN74CBT16212ADGGR
SN74CBT16212ADGGR by Texas Instruments is a 24-function bus driver with a propagation delay of 0.25 ns and 12 bits. It operates at a nominal voltage of 5V, suitable for industrial applications requiring bidirectional communication in tight spaces. The package style is small outline, thin profile, shrink pitch, making it ideal for surface mount designs with limited space constraints.
TTL COMPATIBLE BUS SWITCH
CBT/FST/QS/5C/B
24
.0075 mA
.35 ns
4 V
SN74LVTH16543DLR
SN74LVTH16543DLR by Texas Instruments is a Bus Driver & Transceiver with 8 bits, 3.2 ns propagation delay, and 64 Amp max I (ol). It operates at a nominal voltage of 3.3V and has a temperature range of -40 to 85°C. Ideal for bidirectional applications requiring independent control in industrial settings.
4.9 ns
SN74LVTH16952DLR
SN74LVTH16952DLR by Texas Instruments is a Bus Driver & Transceiver with 8 bits, 2 functions, and 3.3V nominal voltage. It features a propagation delay of 4ns, operates at temperatures from -40 to 85°C, and has a max power supply current of 5mA. Ideal for bidirectional applications requiring independent control in industrial settings.
4.4 ns
SN74ALVC16820DL
SN74ALVC16820DL by Texas Instruments is a 10-bit bus driver with 4.5 ns propagation delay at 3.3V, suitable for industrial applications. It features a max frequency of 150MHz, operates b/w -40 to 85°C, and has a small outline package style for surface mount assembly.
4.5 ns
SN74LVTH16835DLR
SN74LVTH16835DLR by Texas Instruments is an 18-bit bus driver with a propagation delay of 3.7ns at 3.3V, suitable for industrial applications. It features a max operating temperature of 85°C, output polarity TRUE, and a small outline package style for surface mount assembly.
5.7 ns
SN74LVTH16501DGGR
SN74LVTH16501DGGR by Texas Instruments is an 18-bit bus driver with a propagation delay of 3.7 ns at 3.3V, suitable for industrial applications. It features a 64 Amp max I (ol), operates b/w -40 to 85 °C, and has a package style of small outline, thin profile, shrink pitch.
© 2023 All rights reserved
