Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 750311457 is a Datacom Transformer with 2 primary windings, 50uH inductance, and 2500V isolation voltage. It has dimensions of L17.75xB13.46xH12.7 mm and operates b/w -40 to 125 °C. Ideal for applications requiring a transformer with a turns ratio of 4:1, output current up to 4A, and max input voltage of 36V.
Median Price
$8.170
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
DigiKey
1+ parts
$6.620
100+ parts
$5.389
1k+ parts
-
10k+ parts
Mouser Electronics
$5.840
Newark
$9.480
$7.730
$7.010
$6.860
Element14
$11.010
$9.750
Farnell
$5.700
Nova Conductors
$5.605
Vyrian
VNN
Semtec, LLC
Aztec Data Supply Inc.
$1.095
Netroflash
Continental Prestige Electronics
$5.493
Advanced Electronics
$5.717
Corohmni
$6.866
AZTECH Wire
$18.965
Argo Parts USA
Perfect Parts
Having 2 windings allows for efficient energy transfer and isolation in the transformer.
High isolation voltage ensures safety and prevents electrical leakage between primary and secondary windings.
The inductance value helps in maintaining a stable output voltage and reducing ripple in the signal.
Capable of handling high output currents, making it suitable for datacom applications requiring robust performance.
With a high maximum operating temperature, the transformer can withstand demanding environmental conditions.
Provides a stable 5V output voltage, which is commonly used in many datacom applications.
The surface mount design makes it easy to integrate the transformer onto PCBs, saving space and simplifying assembly.
Pulse & Datacom Transformers 750311457 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Wurth Elektronik
Additional Features:
Application:
Maximum DC Unbalance Current:
Height:
Maximum Input Voltage (V):
Isolation Voltage:
JESD-609 Code:
Length:
Load Resistance:
Manufacturer Series:
Mounting Feature:
No. of Functions:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current-1:
Output Voltage-1:
Packing Method:
Dimensions:
Inductance (Primary):
Sub-Category:
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
750311457 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Dc Components
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
Shenzhen Socay Electronics
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Siemens
HCTSM80101AALE
Bourns
The Bourns HCTSM80101AALE is a pulse transformer with 5000V isolation voltage, 250uH inductance, and 1:1 turns ratio. It is AEC-Q200 approved and suitable for datacom applications. With a compact size of 6.5mm x 10.8mm x 12.3mm, it operates b/w -40°C to 125°C temperature range.
SM91501ALO-E
Bourns SM91501ALO-E is a DATACOM TRANSFORMER with 2 functions, 150uH primary inductance, and 4300V isolation voltage. It operates b/w -40 to 125 °C and has a turns ratio of 1:1. Ideal for pulse & datacom applications requiring high isolation and inductance.
HX5084NL
Pulse Electronics
Pulse Electronics' HX5084NL is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems due to its compact L15.24xB7.62xH4.14 (mm) dimensions and -40 to 85°C operating temperature range.
LP5009ANL
Link-pp Int'l Technology
LP5009ANL by Link-pp Int'l Technology is a DATACOM TRANSFORMER with dimensions L13.16xB18.59xH6.12 (mm). It operates b/w -40 to 85 °C and has a Turns Ratio of 1CT:1CT for applications in 10/100 BASE-T, ETHERNET, and LAN networks. Ideal for surface mount installations due to its compact size.
760301304
Wuerth Elektronik & Kg
The Wurth Elektronik 760301304 is a Pulse Transformer with 2500V isolation voltage, 1080uH inductance, and 120 V-us min ET product. Ideal for GATE DRIVE applications, it operates b/w -40 to 125 °C and has a turns ratio of 2.5:1:1.
M21038/27-07
Pico Electronics
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038/27; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 130 Cel; Width: 8.89 mm;
750311596
The Wuerth Elektronik & Kg 750311596 is a Pulse & Datacom Transformer with an isolation voltage of 1500V, inductance of 12uH, and output current of 1.9A. It is used for data communication applications requiring high voltage isolation and efficient power transfer in compact spaces.
IT239
Schaffner Holding Ag
IT239 by Schaffner Holding Ag is a UL-approved pulse transformer with 1000V isolation voltage and 2300ns max pulse rise time. With primary inductance of 3000uH, it's ideal for applications requiring high ET product of 300 V-us. This through-hole mounted transformer operates b/w -25°C to 70°C, making it versatile for various electronic devices.
1080
C&d Technologies
1080 by C&d Technologies is a pulse transformer with an isolation voltage of 2000 V and inductance of 29000 uH. It has dimensions of 15.06mm X 15.06mm X 15.75mm and is suitable for applications requiring high voltage isolation and efficient power transfer.
PM-DB2791S+
Holt Integrated Circuits
PM-DB2791S+ by Holt Integrated Circuits is a DATACOM TRANSFORMER with MIL-STD-1553 approval. It has a turns ratio of 1:2.5 and operates b/w -55°C to 130°C. Ideal for DATA BUS INTERFACE applications, it is compact at 10.16mm x 4.699mm x 10.16mm for surface mount installation.
ALT4532M-201-T001
TDK
ALT4532M-201-T001 by TDK is a Datacom Transformer with inductance of 200uH, suitable for 10/1000 BASE-T, 100 BASE-TX LAN applications. It operates b/w -40 to 85°C and has dimensions of 4.5mm x 3.2mm x 2.9mm for surface mounting.
P0584NL
P0584NL by Pulse Electronics is a pulse transformer used for gate drive applications. It has an isolation voltage of 3000 V, inductance of 450 uH, and operates b/w -40 to 125 °C temperature range.
78613/3JC-R
Murata Manufacturing
Murata Manufacturing's 78613/3JC-R is a pulse transformer with 1000V isolation voltage, 190uH inductance, and 6 V-us min ET product. It is used for datacom applications, featuring surface mounting and dimensions of L9.52xB9.0xH6.65 mm. Operating temperatures range from -40 to 85°C.
78604/4JC
Murata Manufacturing's 78604/4JC is a pulse transformer with 1000V isolation voltage, 65uH primary inductance, and 4 V-us min ET product. Ideal for datacom applications, it is a surface mount transformer with dimensions of 6.35mm x 9mm x 12.7mm and a turns ratio of 2:1.
749020011A
749020011A by Wuerth Elektronik & Kg is a Pulse & Datacom Transformer with UL approval and 1500V isolation voltage. Featuring 1dB insertion loss, it has primary inductance of 350uH. Ideal for applications like LAN and 1000 BASE-T, this surface mount transformer operates b/w -40°C to 85°C.
H5019NL
H5019NL by Pulse Electronics is a datacom transformer with 4 functions and 4 primary windings. It has an isolation voltage of 1500 V and insertion loss of 1 dB. This transformer is suitable for applications such as 1000 BASE-T with a max operating temperature of 70°C.
HCTSM100304FL-E
Bourns HCTSM100304FL-E is a DATACOM TRANSFORMER with 400uH inductance, 4200V isolation voltage, and 1:1.333 turns ratio. Ideal for pulse & datacom applications, it operates b/w -40 to 125°C and features surface mounting at dimensions of 10.8mm x 13.5mm x 7.5mm (WxLxH).
HM2113ZNL
HM2113ZNL by Pulse Electronics is a DATACOM TRANSFORMER with 1:1 Turns Ratio, 150uH Inductance, and 4300V Isolation Voltage. It operates b/w -40 to 125 °C and has AEC-Q200 approval. Ideal for surface mount applications in data communication systems.
77204C
Murata Manufacturing's 77204C is a pulse transformer with 2500V isolation voltage, 4000uH inductance, and 240 V-us min ET product. It is used for data communication applications due to its through-hole mounting feature and compact dimensions of 12.3mm x 20.3mm x 25.4mm.
749020111A
Wurth Elektronik's 749020111A is a DATACOM TRANSFORMER with 1:1 Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for applications like 1000 BASE-T Ethernet networks, featuring Tin (Sn) over Copper (Cu) Terminal Finish and Surface mounting Feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
750311771
Wurth Elektronik
750311771 by Wurth Elektronik is a Datacom Transformer with 2000V isolation voltage, 400uH inductance, and 6:1 turns ratio. Ideal for surface mount applications in pulse and data communication systems due to its compact dimensions of L32.31xB27.03xH13.69 (mm).
750311594
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Turns Ratio (Np:Ns): 2.33:1; Load Resistance: .015 ohm; Inductance (Primary): 15 uH; Dimensions: L32.31XB27.03XH13.69 (mm);
750311591
The Wurth Elektronik 750311591 is a pulse & datacom transformer with an isolation voltage of 1500 V. It has a primary inductance of 8 uH and can handle an output current of 3 A. This surface mount transformer is suitable for applications requiring high voltage isolation and efficient power transfer.
750311625
750311625 by Wurth Elektronik is a Datacom Transformer with 2 primary windings, 9uH inductance, and 1500V isolation voltage. It operates b/w -40 to 125°C, has a turns ratio of 4:1, and supports an output current of up to 4A. Ideal for surface mount applications in pulse and data communication systems.
750311595
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Load Resistance: .012 ohm; Output Current-1: 3 A; Height: 13.69 mm; Maximum Input Voltage (V): 75;
750311592
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 750311592; Terminal Finish: TIN SILVER; No. of Functions: 1; Minimum Operating Temperature: -40 Cel;
750311590
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Output Voltage-1: 12 V; Dimensions: L32.31XB27.03XH13.69 (mm); Packing Method: TAPE & REEL; Turns Ratio (Np:Ns): 2:1;
750311593
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Load Resistance: .008 ohm; Maximum Input Voltage (V): 75; Maximum Operating Temperature: 85 Cel; Height: 13.69 mm;
750311889
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Load Resistance: .175 ohm; Isolation Voltage: 500 V; No. of Winding (Primary): 1; Maximum Operating Frequency: 300 KHz;
750311783
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN SILVER; Minimum Input Voltage (V): 19; Packing Method: TAPE & REEL; Width: 27.03 mm;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Input Voltage (V): 30; Maximum Operating Temperature: 125 Cel; Height: 13.69 mm; Additional Features: LENGTH DIM INCLUDES TERMINALS ALSO;
750311624
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Additional Features: LENGTH DIM INCLUDES TERMINALS ALSO; Maximum Input Voltage (V): 40; Inductance (Primary): 9 uH;
750310988
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 750310988; Length: 32.31 mm; Output Voltage-1: 48 V; Turns Ratio (Np:Ns): 4.42:1;
750311564
The Wurth Elektronik 750311564 is a pulse & datacom transformer with 1 function and 2 primary windings. It has an isolation voltage of 1500V, inductance of 9.07uH, and can handle an output current of 3A. This transformer is suitable for applications requiring surface mounting and operates within a temperature range of -40 to 125°C.
750311422
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: GENERAL PURPOSE; Output Current-1: 4 A; Length: 17.75 mm; Isolation Voltage: 1500 V;
750311423
Wurth Elektronik 750311423 is a Datacom Transformer with 2 primary windings, 1500V isolation voltage, and 50uH inductance. It has dimensions of L17.75xB13.46xH12.7 mm and is used for applications requiring a max operating temperature of 125°C, output current of 4A, and output voltage of 5V.
750311691
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 1; Load Resistance: 7.95 ohm; Packing Method: TAPE & REEL; Length: 8.26 mm;
750311424
750311424 by Wurth Elektronik is a Datacom Transformer with 2 primary windings, 1500V isolation voltage, and 100uH inductance. It has dimensions of 17.75mm x 13.46mm x 12.7mm and is used for applications requiring a max operating temperature of 125°C, output current of 1A, and output voltage of 12V.
750311458
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 750311458; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Additional Features: LENGTH DIM INCLUDES TERMINALS ALSO; Width: 13.46 mm;
750311486
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 750311486; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Length: 17.75 mm; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved