Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Wurth Elektronik 750311422 is a Datacom Transformer with 2 primary windings, 1500V isolation voltage, and 50uH inductance. It has dimensions of L17.75xB13.46xH12.7 mm and is suitable for applications requiring a max operating temperature of 125°C, output current of 4A, and turns ratio of 5:1.
Median Price
$6.412
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
ACDS - Activité Composants Distribution Service
Aranea Global
$6.284
$6.032
Continental Prestige Electronics
AZTECH Wire
$16.552
Ampacity Inc.
$539.000
Argo Parts USA
Perfect Parts
Cyclops Electronics Ltd (Excess)
Having 2 windings on the primary side allows for efficient power transfer and helps in reducing signal loss, making this product a reliable choice for pulse and datacom applications.
With a high isolation voltage of 1500V, this transformer provides excellent protection against electrical breakdown and ensures safe operation in high voltage environments.
With a high output current of 4A, this transformer is capable of handling heavy loads in pulse and datacom applications, ensuring reliable performance.
The high maximum operating temperature of 125°C allows this transformer to withstand elevated temperatures without compromising performance, making it suitable for industrial applications.
Compact size of this transformer allows for easy installation in space-constrained applications, while still delivering high performance.
Pulse & Datacom Transformers 750311422 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Wurth Elektronik
Additional Features:
Application:
Maximum DC Unbalance Current:
Height:
Maximum Input Voltage (V):
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current-1:
Output Voltage-1:
Packing Method:
Dimensions:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
750311422 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS3103F
Idec
ROTARY SWITCH;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
PIC18F4550-I/P
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
LL4148
Surge Components
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS3303C
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Rectron
IL-20-0001
Schurter Ag
IL-20-0001 by Schurter Ag is a 1.1W Pulse Transformer with 4000V isolation voltage and 1500ns max pulse rise time. Ideal for datacom applications, it features inductance of 3000uH, operates b/w -25 to 70°C, and has dimensions of L28.0xB23.0xH14.0mm for through-hole mounting.
1013C
Murata Manufacturing
Murata Manufacturing's 1013C is a pulse transformer with 500V isolation voltage, 3000uH inductance, and 200 V-us min ET product. Ideal for datacom applications, it features through-hole mounting and compact dimensions of 15.75mm x 15.06mm x 15.06mm.
750311625
Wuerth Elektronik & Kg
750311625 by Wurth Elektronik is a Datacom Transformer with 2 primary windings, 9uH inductance, and 1500V isolation voltage. It operates b/w -40 to 125°C, has a turns ratio of 4:1, and supports an output current of up to 4A. Ideal for surface mount applications in pulse and data communication systems.
IT253
Schaffner Holding Ag
IT253 by Schaffner Holding Ag is a Pulse Transformer with 1300 ns max pulse rise time, 1100 uH primary inductance, and L17.6XB16.7XH11.3 (mm) dimensions. Ideal for GATE DRIVE applications, it operates b/w -25 to 70 °C with THROUGH HOLE MOUNTED mounting feature.
78615/8JC
Murata Manufacturing's 78615/8JC is a Pulse Transformer with 1000V isolation voltage, 1000uH inductance, and 15 V-us min ET product. Ideal for datacom applications, it is a surface mount transformer with dimensions of 6.35mm x 9mm x 12.7mm and turns ratio of 1CT:1CT.
CR7983-CLD
Coilcraft
CR7983-CLD by Coilcraft is a Pulse & Datacom Transformer with 5000V isolation voltage, 256uH inductance, and 1:2 turns ratio. Ideal for data communication applications due to its surface mounting feature and nominal input voltage of 5V. Operating temperature ranges from -40°C to 125°C.
H1086NL
Pulse Electronics
H1086NL by Pulse Electronics is a Datacom Transformer with 1 dB Insertion Loss, 1500 V Isolation Voltage, and 111 Secondary Windings. It is designed for 10/100 BASE-T applications, operates b/w 0-70°C temperatures, and has dimensions of L25.4xB12.83xH5.97 mm for surface mount installation.
HX2019NLT
HX2019NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1:1 turns ratio, 1500V isolation voltage, and 1.2dB insertion loss. It is designed for 10/100 BASE-TX Ethernet applications, operates b/w -40°C to 85°C, and comes in L12.70xB7.11xH5.97 mm dimensions for surface mount installation.
78250MC-R
C&d Technologies
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 78250; Terminal Finish: Tin (Sn); Height: 6.35 mm; Application: GENERAL PURPOSE;
7490100111
Wurth Elektronik 7490100111 is a Datacom Transformer with 2 functions and 1500V isolation voltage. Featuring inductance of 350uH, it operates b/w -40 to 105°C. Ideal for surface mount applications in data communication systems.
TST-9007
Data Device
TST-9007 by Data Device is a DATACOM TRANSFORMER with Impedance of 3000Ω, Isolation Voltage of 100V, and Max Pulse Rise Time of 200ns. Ideal for applications requiring THROUGH HOLE MOUNTED transformers with load resistance of 4Ω and turns ratio options of 1:2.5 or 1:1.79.
HM2103NL
HM2103NL by Pulse Electronics is a DATACOM TRANSFORMER with 150uH inductance, 4300V isolation voltage, and AEC-Q200 approvals. It operates b/w -40 to 125°C and has a nominal input voltage of 1000V. Ideal for surface mount applications in pulse & datacom systems.
DA2319-ALD
Coilcraft's DA2319-ALD is a pulse transformer with 1500V isolation voltage and 296uH primary inductance. Ideal for gate drive applications, it operates b/w -40 to 125°C, with dimensions of L6.6xB5.0xH5.4mm and a turns ratio of 1:1 for surface mounting.
96046313029
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; No. of Functions: 2; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Isolation Voltage: 1500 V;
IT234
IT234 by Schaffner Holding Ag is a pulse transformer with dimensions of L27.0XB22.5XH13.7 (mm). It has a max pulse rise time of 1000 ns and an inductance of 17000 uH. This transformer is commonly used for gate drive applications, with a temperature range of -25 to 70 °C.
Q4470-CLD
Coilcraft's Q4470-CLD is a 0.25 W pulse transformer with 1500 V isolation voltage and 400 uH primary inductance. Ideal for gate drive applications, it operates b/w -40 to 85 °C, has a turns ratio of 1CT:1.3CT, and features surface mounting.
EPA4271GE-LF
Pca Electronics
EPA4271GE-LF by Pca Electronics is a Pulse Transformer with 1500V isolation voltage, 785uH inductance, and 9.7 V-us min ET product. Ideal for GATE DRIVE applications, it operates b/w -40 to 85 °C and comes in L8.64XB6.73XH2.49 mm dimensions for surface mount assembly.
H1260
H1260 by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. It is designed for 10/100 BASE-T applications, featuring surface mounting and compact dimensions of L12.7xB7.11xH6.0 mm for efficient integration in networking systems. Operating temperature ranges from 0 to 70°C, making it suitable for various environments.
1001C
1001C by Murata Manufacturing is a pulse transformer with an isolation voltage of 2000 V, inductance of 3000 uH, and min ET product of 200 V-us. It is designed for applications requiring high voltage isolation and precise signal transmission, commonly used in data communication systems and power supplies.
749010011
Wurth Elektronik 749010011 is a UL approved datacom transformer with 1500V isolation voltage and 350uH primary inductance. It is designed for LAN applications supporting 10/100 BASE-TX, with dimensions of 12.7mm x 6.855.08mm and operating temperatures ranging from 0 to 70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
750311771
Wurth Elektronik
750311771 by Wurth Elektronik is a Datacom Transformer with 2000V isolation voltage, 400uH inductance, and 6:1 turns ratio. Ideal for surface mount applications in pulse and data communication systems due to its compact dimensions of L32.31xB27.03xH13.69 (mm).
750311594
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Turns Ratio (Np:Ns): 2.33:1; Load Resistance: .015 ohm; Inductance (Primary): 15 uH; Dimensions: L32.31XB27.03XH13.69 (mm);
750311591
The Wurth Elektronik 750311591 is a pulse & datacom transformer with an isolation voltage of 1500 V. It has a primary inductance of 8 uH and can handle an output current of 3 A. This surface mount transformer is suitable for applications requiring high voltage isolation and efficient power transfer.
750311595
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Load Resistance: .012 ohm; Output Current-1: 3 A; Height: 13.69 mm; Maximum Input Voltage (V): 75;
750311592
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 750311592; Terminal Finish: TIN SILVER; No. of Functions: 1; Minimum Operating Temperature: -40 Cel;
750311590
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Output Voltage-1: 12 V; Dimensions: L32.31XB27.03XH13.69 (mm); Packing Method: TAPE & REEL; Turns Ratio (Np:Ns): 2:1;
750311593
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Load Resistance: .008 ohm; Maximum Input Voltage (V): 75; Maximum Operating Temperature: 85 Cel; Height: 13.69 mm;
750311889
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Load Resistance: .175 ohm; Isolation Voltage: 500 V; No. of Winding (Primary): 1; Maximum Operating Frequency: 300 KHz;
750311783
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN SILVER; Minimum Input Voltage (V): 19; Packing Method: TAPE & REEL; Width: 27.03 mm;
750311596
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Input Voltage (V): 30; Maximum Operating Temperature: 125 Cel; Height: 13.69 mm; Additional Features: LENGTH DIM INCLUDES TERMINALS ALSO;
750311624
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Additional Features: LENGTH DIM INCLUDES TERMINALS ALSO; Maximum Input Voltage (V): 40; Inductance (Primary): 9 uH;
750310988
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 750310988; Length: 32.31 mm; Output Voltage-1: 48 V; Turns Ratio (Np:Ns): 4.42:1;
750311564
The Wurth Elektronik 750311564 is a pulse & datacom transformer with 1 function and 2 primary windings. It has an isolation voltage of 1500V, inductance of 9.07uH, and can handle an output current of 3A. This transformer is suitable for applications requiring surface mounting and operates within a temperature range of -40 to 125°C.
750311423
Wurth Elektronik 750311423 is a Datacom Transformer with 2 primary windings, 1500V isolation voltage, and 50uH inductance. It has dimensions of L17.75xB13.46xH12.7 mm and is used for applications requiring a max operating temperature of 125°C, output current of 4A, and output voltage of 5V.
750311457
Wurth Elektronik 750311457 is a Datacom Transformer with 2 primary windings, 50uH inductance, and 2500V isolation voltage. It has dimensions of L17.75xB13.46xH12.7 mm and operates b/w -40 to 125 °C. Ideal for applications requiring a transformer with a turns ratio of 4:1, output current up to 4A, and max input voltage of 36V.
750311691
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 1; Load Resistance: 7.95 ohm; Packing Method: TAPE & REEL; Length: 8.26 mm;
750311439
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 750311439; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Load Resistance: .028 ohm; Maximum Input Voltage (V): 57;
750311456
750311456 by Wurth Elektronik is a Pulse & Datacom Transformer with 2 primary windings, 2500V isolation voltage, and 100uH inductance. It has a turns ratio of 3:1 and output voltage of 12V. Ideal for surface mount applications in data communication systems due to its compact dimensions and high operating temperature range from -40°C to 125°C.
750311458
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 750311458; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Additional Features: LENGTH DIM INCLUDES TERMINALS ALSO; Width: 13.46 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved