Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 750311889 is a Pulse & Datacom Transformer with 500V isolation voltage, 37uH inductance, and 0.1A output current. Ideal for surface mount applications in data communication systems due to its compact dimensions and high operating temperature range of -40 to 125°C.
Median Price
$9.960
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
$8.590
100+ parts
$6.983
1k+ parts
$6.278
10k+ parts
-
Mouser Electronics
$8.110
$7.300
Newark
$11.910
$10.060
Nova Conductors
$6.854
Vyrian
VNN
Corohmni
$4.977
Aztec Data Supply Inc.
$5.350
Aranea Global
$6.717
$6.448
Continental Prestige Electronics
Semicontronic
$7.480
$7.293
$7.256
Ampacity Inc.
AZTECH Wire
$18.664
Argo Parts USA
Perfect Parts
Provides a high level of electrical isolation, ensuring safety and preventing voltage spikes from affecting sensitive components.
The inductance value helps in smooth energy transfer and efficient operation of the transformer.
Capable of delivering a stable output current, suitable for pulse and data communication applications.
Compact size allows for easy integration into various electronic devices and circuit boards.
Can withstand high operating temperatures, making it suitable for demanding operating environments.
Capable of handling relatively high input voltages, providing flexibility in different power supply setups.
Pulse & Datacom Transformers 750311889 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Wurth Elektronik
Additional Features:
Application:
Maximum DC Unbalance Current:
Height:
Maximum Input Voltage (V):
Isolation Voltage:
Length:
Load Resistance:
Mounting Feature:
No. of Functions:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current-1:
Output Voltage-1:
Packing Method:
Dimensions:
Inductance (Primary):
Sub-Category:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
750311889 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Fairchild Semiconductor
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
TG110-E055N5RLTR
Halo Electronics
Halo Electronics TG110-E055N5RLTR is a Datacom Transformer with 1500V isolation voltage, 0.4uH inductance, and 1CT:1CT turns ratio. Ideal for 10/100 BASE-TX and Ethernet applications, it operates b/w -40°C to 85°C. Measuring 6.35mm x 7.11mm x 12.7mm, it features surface mounting method and EN/UL approvals.
1017C
Murata Power Solutions
PULSE TRANSFORMER; Mounting Feature: PCB MOUNT; Terminal Finish: Matte Tin (Sn); Minimum ET Product: 130 V-us; Inductance (Primary): 800 uH; Minimum Operating Temperature: 0 Cel;
96046123309
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Minimum Operating Temperature: -40 Cel; Isolation Voltage: 1500 V; Turns Ratio (Np:Ns): 1:2; Width: 23.4 mm;
ISNF-0249-D101
Schurter Ag
ISNF-0249-D101 by Schurter Ag is a pulse transformer with 3500V isolation voltage, 1000ns max pulse rise time, and 1400uH primary inductance. Ideal for datacom applications, it operates b/w -25°C to 100°C and features surface mounting method.
PM-DB2745S+
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Application: DATA BUS INTERFACE; Height: 3.937 mm; Width: 16 mm;
PM-DB2745L+
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 1; Turns Ratio (Np:Ns): 1:2.5; Height: 3.937 mm;
PM-DB2776+
Holt Integrated Circuits
PM-DB2776+ by Holt Integrated Circuits is a DATACOM TRANSFORMER with MIL-STD-1553 approval. It has a temp range of -55 to 130°C, Tin/Silver/Copper finish, and dimensions of 17.145x10.16x4.699 mm. Ideal for DATA BUS INTERFACE applications due to its 1:2.5 turns ratio and surface mount feature.
EPA4271GE-LF
Pca Electronics
EPA4271GE-LF by Pca Electronics is a Pulse Transformer with 1500V isolation voltage, 785uH inductance, and 9.7 V-us min ET product. Ideal for GATE DRIVE applications, it operates b/w -40 to 85 °C and comes in L8.64XB6.73XH2.49 mm dimensions for surface mount assembly.
78602/16MC
Murata Manufacturing
Murata Manufacturing's 78602/16MC is a UL-approved pulse transformer with 1000V isolation voltage and 4000uH inductance. Ideal for datacom applications, it features a compact size of L9.52xB9.0xH6.35mm, matte tin terminal finish, and surface mounting capability.
8234
Api Technologies
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: 10 BASE-T; Length: 25.4 mm; Width: 12.7 mm; Turns Ratio (Np:Ns): 1:1; 1:1;
750871013
Wuerth Elektronik & Kg
The Wurth Elektronik 750871013 is a pulse & datacom transformer with 1 function and 2 primary windings. It has an isolation voltage of 4500 V and inductance of 4500 uH. This transformer is suitable for applications requiring a max operating temperature of 125°C and an output voltage of 5V.
HM2113ZNL
Pulse Electronics
HM2113ZNL by Pulse Electronics is a DATACOM TRANSFORMER with 1:1 Turns Ratio, 150uH Inductance, and 4300V Isolation Voltage. It operates b/w -40 to 125 °C and has AEC-Q200 approval. Ideal for surface mount applications in data communication systems.
1001
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Width: 15.06 mm; No. of Functions: 1;
H5007NL
H5007NL by Pulse Electronics is a 4-function datacom transformer with 1 dB insertion loss and 1500 V isolation voltage. Ideal for 1000 BASE-T applications, it operates b/w 0-70°C with dimensions of L17.53xB12.2xH5.26 mm, featuring a surface mount design and tin/copper terminal finish (Sn/Cu).
749010012
The Wurth Elektronik 749010012 is a pulse and datacom transformer with UL approval. It has an isolation voltage of 1500 V, insertion loss of 1.1 dB, and primary inductance of 350 uH. This surface mount transformer is suitable for LAN applications such as 10/100 BASE-TX networks.
7490100111
Wurth Elektronik 7490100111 is a Datacom Transformer with 2 functions and 1500V isolation voltage. Featuring inductance of 350uH, it operates b/w -40 to 105°C. Ideal for surface mount applications in data communication systems.
749020011A
749020011A by Wuerth Elektronik & Kg is a Pulse & Datacom Transformer with UL approval and 1500V isolation voltage. Featuring 1dB insertion loss, it has primary inductance of 350uH. Ideal for applications like LAN and 1000 BASE-T, this surface mount transformer operates b/w -40°C to 85°C.
PM-DB2745D+
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Application: DATA BUS INTERFACE; Turns Ratio (Np:Ns): 1:2.5; No. of Functions: 1;
GST5009LF
Bothhand Usa
GST5009LF by Bothhand Usa is a DATACOM TRANSFORMER with 4 functions and 1500V isolation voltage. It has primary inductance of 350uH, suitable for 1000 BASE-T ETHERNET applications. With dimensions of L15.1XB7.1XH4.0 (mm), it operates b/w 0-70°C temperature range.
HX1234NL
HX1234NL by Pulse Electronics is a DATACOM TRANSFORMER with 1CT:1CT Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for 10/100 BASE-TX applications, operates b/w -40 to 85 °C, and has dimensions of L28.58xB12.19xH7.11 mm for surface mount assembly.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
750311771
Wurth Elektronik
750311771 by Wurth Elektronik is a Datacom Transformer with 2000V isolation voltage, 400uH inductance, and 6:1 turns ratio. Ideal for surface mount applications in pulse and data communication systems due to its compact dimensions of L32.31xB27.03xH13.69 (mm).
750311594
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Turns Ratio (Np:Ns): 2.33:1; Load Resistance: .015 ohm; Inductance (Primary): 15 uH; Dimensions: L32.31XB27.03XH13.69 (mm);
750311591
The Wurth Elektronik 750311591 is a pulse & datacom transformer with an isolation voltage of 1500 V. It has a primary inductance of 8 uH and can handle an output current of 3 A. This surface mount transformer is suitable for applications requiring high voltage isolation and efficient power transfer.
750311625
750311625 by Wurth Elektronik is a Datacom Transformer with 2 primary windings, 9uH inductance, and 1500V isolation voltage. It operates b/w -40 to 125°C, has a turns ratio of 4:1, and supports an output current of up to 4A. Ideal for surface mount applications in pulse and data communication systems.
750311595
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Load Resistance: .012 ohm; Output Current-1: 3 A; Height: 13.69 mm; Maximum Input Voltage (V): 75;
750311592
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 750311592; Terminal Finish: TIN SILVER; No. of Functions: 1; Minimum Operating Temperature: -40 Cel;
750311590
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Output Voltage-1: 12 V; Dimensions: L32.31XB27.03XH13.69 (mm); Packing Method: TAPE & REEL; Turns Ratio (Np:Ns): 2:1;
750311593
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Load Resistance: .008 ohm; Maximum Input Voltage (V): 75; Maximum Operating Temperature: 85 Cel; Height: 13.69 mm;
750311783
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN SILVER; Minimum Input Voltage (V): 19; Packing Method: TAPE & REEL; Width: 27.03 mm;
750311596
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Input Voltage (V): 30; Maximum Operating Temperature: 125 Cel; Height: 13.69 mm; Additional Features: LENGTH DIM INCLUDES TERMINALS ALSO;
750311624
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Additional Features: LENGTH DIM INCLUDES TERMINALS ALSO; Maximum Input Voltage (V): 40; Inductance (Primary): 9 uH;
750310988
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 750310988; Length: 32.31 mm; Output Voltage-1: 48 V; Turns Ratio (Np:Ns): 4.42:1;
750311564
The Wurth Elektronik 750311564 is a pulse & datacom transformer with 1 function and 2 primary windings. It has an isolation voltage of 1500V, inductance of 9.07uH, and can handle an output current of 3A. This transformer is suitable for applications requiring surface mounting and operates within a temperature range of -40 to 125°C.
750311422
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: GENERAL PURPOSE; Output Current-1: 4 A; Length: 17.75 mm; Isolation Voltage: 1500 V;
750311423
Wurth Elektronik 750311423 is a Datacom Transformer with 2 primary windings, 1500V isolation voltage, and 50uH inductance. It has dimensions of L17.75xB13.46xH12.7 mm and is used for applications requiring a max operating temperature of 125°C, output current of 4A, and output voltage of 5V.
750311457
Wurth Elektronik 750311457 is a Datacom Transformer with 2 primary windings, 50uH inductance, and 2500V isolation voltage. It has dimensions of L17.75xB13.46xH12.7 mm and operates b/w -40 to 125 °C. Ideal for applications requiring a transformer with a turns ratio of 4:1, output current up to 4A, and max input voltage of 36V.
750311691
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 1; Load Resistance: 7.95 ohm; Packing Method: TAPE & REEL; Length: 8.26 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved