Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 749020310 is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for LAN applications at temperatures ranging from -40 to 85°C. Compact design with dimensions of 17.53mm x 14.6mm x 4.5mm for surface mount installation.
Median Price
$7.000
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$5.540
100+ parts
$3.950
1k+ parts
$3.390
10k+ parts
$2.940
Farnell
$6.860
$4.760
$4.360
-
DigiKey
$5.482
Mouser Electronics
$7.520
$5.490
$4.620
Newark
$9.530
$7.240
$6.260
$5.610
Element14
$10.140
$7.950
$7.220
RS (Exports)
$4.541
Nova Conductors
$4.459
VNN
Vyrian
LIBRA Elektronik GmbH
Corohmni
$1.103
Aztec Data Supply Inc.
$3.850
Ampacity Inc.
$3.860
Bastille Electronics
$4.236
$4.024
$3.969
Argo Parts USA
Continental Prestige Electronics
$6.130
$4.400
$3.180
GreenTree Electronics
Having 4 functions in one transformer increases efficiency and reduces the need for multiple components, saving space and simplifying the design.
High isolation voltage ensures safety and reliability in data communication applications, protecting sensitive electronic components from voltage spikes or surges.
The inductance value of 350 uH helps in smooth signal transmission and noise suppression, ensuring high-quality data transfer in LAN applications.
The packaging method of TR, EMBOSSED PLASTIC, 13 INCH provides durability and protection to the transformer during handling and installation, ensuring long-term reliability.
Specifically designed for use in 1000 BASE-T and LAN applications, this transformer is optimized for high-speed data transmission and network connectivity.
With a maximum operating temperature of 85°C, this transformer can withstand high temperature environments, making it suitable for industrial and commercial settings.
The ability to operate at temperatures as low as -40°C ensures reliable performance in extreme cold conditions, making this transformer versatile in various environments.
Compact height of 4.5 mm allows for space-saving installation in cramped circuits or PCB layouts, ideal for applications with limited space constraints.
Narrow width of 14.6 mm further contributes to space efficiency and enables dense PCB layouts, optimizing the overall design of electronic devices.
Specifically designed for data communication applications, this transformer is tailored to meet the requirements of pulse and datacom systems, ensuring optimal performance.
Surface mount design simplifies the installation process, saves assembly time, and allows for automated manufacturing, enhancing overall productivity and efficiency.
Moderate length of 17.53 mm provides a balanced form factor for easy integration into various electronic devices or systems, offering flexibility in design configurations.
The equal turns ratio across all functions ensures consistent performance and signal integrity, enabling reliable data transmission and communication across the network.
Pulse & Datacom Transformers 749020310 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Wurth Elektronik
Application:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
749020310 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Philips Semiconductors
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
Continental Device India
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
Silicon Standard
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
H5020NLT
Pulse Electronics
H5020NLT by Pulse Electronics is a datacom transformer with 4 functions and windings. It offers an isolation voltage of 1500V and insertion loss of 1dB, suitable for applications like 1000BASE-T. With dimensions of L27.94xB7.54xH8.33 (mm) and surface mounting feature, it operates b/w -40°C to +85°C at frequencies up to 100MHz.
SM43P01EL
Bourns
Bourns SM43P01EL is a Datacom Transformer with 2 functions, 1500V isolation voltage, and 120uH primary inductance. Ideal for LAN applications, it operates b/w 0-85°C and features surface mounting at dimensions of 4.1x10.3x16.5mm.
1001C
Murata Power Solutions
PULSE TRANSFORMER; Mounting Feature: PCB MOUNT; Maximum Operating Temperature: 70 Cel; Height: 15.75 mm; Turns Ratio (Np:Ns): 1:1; Minimum ET Product: 200 V-us;
77204C
Murata Manufacturing
Murata Manufacturing's 77204C is a pulse transformer with 2500V isolation voltage, 4000uH inductance, and 240 V-us min ET product. It is used for data communication applications due to its through-hole mounting feature and compact dimensions of 12.3mm x 20.3mm x 25.4mm.
1009
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Minimum ET Product: 550 V-us; Dimensions: 15.06mm X 15.06mm X 15.75mm;
14240R
Echelon
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; TUV; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Application: GENERAL PURPOSE;
M21038/27-07
Inrcore
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038/27E; Minimum Operating Temperature: -55 Cel; Width: 8.89 mm; Application: GENERAL PURPOSE;
750311590
Wuerth Elektronik & Kg
Wurth Elektronik 750311590 is a Pulse & Datacom Transformer with 1500V isolation voltage, 8uH primary inductance, and 3.8A output current. Ideal for data communication applications due to its surface mounting feature and compact dimensions of L32.31xB27.03xH13.69 (mm).
1000B-5002XNL
1000B-5002XNL by Pulse Electronics is a Datacom Transformer with 8 functions, inductance of 350uH, and dimensions L17.53xB12.19xH5.72 (mm). Ideal for 10/100/1000 BASE-T applications, it operates b/w -55 to 125 °C and features surface mounting method.
H5019NLT
H5019NLT by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. It is designed for 1000 BASE-T applications, featuring dimensions of L19.81xB16.64xH2.54 mm and operating temperatures from 0 to 70°C. The transformer type is surface mount with turns ratio of 1:1; 1:1, packed in TAPE & REEL format.
PM-DB2791S
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 1; Application: DATA BUS INTERFACE; Length: 10.16 mm;
96046323379
Littelfuse
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Length: 14 mm; Isolation Voltage: 1875 V; No. of Functions: 2;
TG110-E050N5RLTR
Halo Electronics
TG110-E050N5RLTR by Halo Electronics is a DATACOM TRANSFORMER for 10/100 BASE-TX Ethernet applications. It offers 2 functions with an isolation voltage of 1500V and primary inductance of 350uH. This surface mount transformer operates b/w -40°C to 85°C, measuring L12.7xB7.11xH6.35mm in dimensions.
LP5018ANL
Link-pp Int'l Technology
LP5018ANL by Link-pp Int'l Technology is a pulse & datacom transformer with 4 functions. It has an isolation voltage of 1500 V and primary inductance of 350 uH. This transformer is commonly used in applications such as 10/100 BASE-TX Ethernet.
PM-DB2745L+
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 1; Turns Ratio (Np:Ns): 1:2.5; Height: 3.937 mm;
ITRF-0249-D101
Schurter Ag
Schurter Ag's ITRF-0249-D101 is a VDE-approved pulse transformer with 3200V isolation voltage, 50ns max pulse rise time, and 1200uH primary inductance. Ideal for datacom applications, it operates b/w -25°C to 100°C temperatures and features dimensions of L18.2xB17.8xH13.0mm for through-hole mounting.
750311457
Wurth Elektronik 750311457 is a Datacom Transformer with 2 primary windings, 50uH inductance, and 2500V isolation voltage. It has dimensions of L17.75xB13.46xH12.7 mm and operates b/w -40 to 125 °C. Ideal for applications requiring a transformer with a turns ratio of 4:1, output current up to 4A, and max input voltage of 36V.
PM-DB2776
Holt Integrated Circuits
PM-DB2776 by Holt Integrated Circuits is a MIL-STD-1553 approved DATACOM TRANSFORMER for DATA BUS INTERFACE. With a temperature range of -55 to 130°C, it features turns ratios of 1:2.5 and 1:1.79. This surface mount transformer measures 17.145mm x 10.16mm x 4.699mm, making it ideal for various data communication applications.
H5008NL
H5008NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, this transformer operates b/w -40°C to +70°C with dimensions of L15.24xB13.64xH5.47mm and a max frequency of 100000KHz.
TG1G-E005J24LF
TG1G-E005J24LF by Halo Electronics is a DATACOM TRANSFORMER with 4 functions and 1500V isolation voltage. It has primary inductance of 350uH, dimensions L13.21xB12.19xH3.76 (mm), and turns ratio of 1CT:1CT. Ideal for 10/100/1000 BASE-T Ethernet applications, it operates b/w -40 to 85 °C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7490100111A
Wurth Elektronik
7490100111A by Wuerth Elektronik & Kg is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 1500V. It has an insertion loss of 1.1 dB, inductance of 350uH, and operates b/w -40 to 105°C. Primarily used in LAN applications due to its compact dimensions (12.7mm x 8.8mm x 6.35mm) and surface mount feature for easy installation.
749020023A
The Wurth Elektronik 749020023A is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. It has inductance of 350uH, suitable for 10/100/1000 BASE-T applications. With a compact size of 15.1x10x4.25mm and surface mount feature, it operates b/w -40 to +85°C temperature range.
749010012A
749010012A by Wurth Elektronik is a Pulse & Datacom Transformer with 1500V isolation voltage, 350uH inductance, and dimensions of L12.7xB8.8xH6.35 mm. It is used for 10/100 BASE-TX, AUTOMDIX, and LAN applications due to its surface mount feature and 1:1 turns ratio for primary to secondary winding.
749013011A
Wurth Elektronik 749013011A is a Pulse & Datacom Transformer with 1500V isolation voltage, 1.1dB insertion loss, and primary inductance of 350uH. Ideal for applications like 10/100 BASE-TX, AUTOMDIX, and LAN due to its compact dimensions of L12.7xB8.8xH6.35mm and surface mounting feature.
749010012
The Wurth Elektronik 749010012 is a pulse and datacom transformer with UL approval. It has an isolation voltage of 1500 V, insertion loss of 1.1 dB, and primary inductance of 350 uH. This surface mount transformer is suitable for LAN applications such as 10/100 BASE-TX networks.
749020100A
749020100A by Wurth Elektronik is a pulse & datacom transformer with an isolation voltage of 1500V. It has a primary inductance of 350uH and dimensions of L12.7XB8.6XH3.0 (mm). This transformer is suitable for LAN applications, specifically for 10/100/1000 BASE-T networks.
749020111A
Wurth Elektronik's 749020111A is a DATACOM TRANSFORMER with 1:1 Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for applications like 1000 BASE-T Ethernet networks, featuring Tin (Sn) over Copper (Cu) Terminal Finish and Surface mounting Feature.
749020010A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: Tin (Sn) over Copper (Cu); Maximum Operating Temperature: 85 Cel; No. of Functions: 4;
7490100110A
Wurth Elektronik's 7490100110A is a UL-approved transformer with 1500V isolation voltage, 1.1dB insertion loss, and 350uH inductance. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to +85°C and features surface mounting method.
749013021
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749013021; Approvals (V): UL; Terminal Finish: TIN OVER NICKEL; Isolation Voltage: 1500 V;
749020011A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: TIN OVER NICKEL; Dimensions: L17.5XB14.2XH6.0 (mm); JESD-609 Code: e3;
749020010
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749020010; Approvals (V): UL; No. of Functions: 1; Minimum Operating Temperature: 0 Cel;
7490140122B
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Length: 17.1 mm; Application: 10/100 BASE-T; Maximum Operating Temperature: 85 Cel;
7490120110
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: Tin (Sn); Width: 9.27 mm; No. of Functions: 1;
749012011
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749012011; Terminal Finish: TIN SILVER; Minimum Operating Temperature: 0 Cel; Turns Ratio (Np:Ns): 1:1; 1:1;
7490140123B
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Application: 10/100 BASE-T; No. of Functions: 1; Packing Method: TR, 13 INCH;
749010013
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; CSA; Terminal Finish: TIN COPPER; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH;
7490100161A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 7490100161A; Approvals (V): UL; Terminal Finish: Tin/Copper (Sn/Cu); No. of Functions: 1;
749010310
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH; Maximum Operating Temperature: 85 Cel; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH;
7490220120
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN OVER NICKEL; Maximum Operating Temperature: 105 Cel; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved