Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wuerth Elektronik & Kg 749013021 is a Pulse & Datacom Transformer with 1500V isolation voltage, 1.2dB insertion loss, and primary inductance of 350uH. Ideal for LAN applications like 100 BASE-T due to its compact dimensions of 13.64mm x 11.94mm x 6.22mm and surface mounting feature. Operating temperature range from 0°C to 70°C makes it versatile for various environments.
Median Price
$3.315
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Cyclops Electronics Ltd
Vyrian
VNN
Pegasus Components GmbH
Corohmni
$2.638
Continental Prestige Electronics
$2.928
$2.869
Argo Parts USA
Aztec Data Supply Inc.
$3.110
AZTECH Wire
$12.725
Ampacity Inc.
$667.000
Semicontronic
$715.000
$697.125
$693.550
Kepictronics
Netroflash
$3.249
$3.149
$3.083
Having UL approval ensures that the product has met rigorous safety standards, making it a reliable choice for use in various applications.
High isolation voltage provides better protection against electrical hazards and signal interference, ensuring reliable data transmission.
Low insertion loss helps maintain signal integrity and quality, resulting in efficient data transfer over LAN networks.
Optimal inductance value ensures efficient energy transfer and impedance matching in the transformer for improved performance.
Tape and reel packaging provides convenient storage, handling, and automated assembly, saving time and effort during production.
Specifically designed for LAN networks and 100 BASE-T applications, making it suitable for high-speed data transmission in networking systems.
With a high maximum operating temperature, the transformer can withstand heat and maintain performance in demanding environments.
Capable of operating at low temperatures, ensuring reliable functionality even in cold climates or environments.
Tin over nickel terminal finish offers excellent corrosion resistance and solderability, ensuring long-term reliability and durability.
Surface mount design allows easy and secure installation on PCBs, saving space and providing a compact solution for data communication systems.
Specifically tailored for data communication applications, ensuring optimized performance and compatibility with modern networking technologies.
Pulse & Datacom Transformers 749013021 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Wurth Elektronik
Additional Features:
Application:
Approvals (V):
Height:
Insertion Loss:
Isolation Voltage:
JESD-609 Code:
Length:
Manufacturer Series:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
749013021 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
Uniohm
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Panjit International
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Continental Device India
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
750311422
Wuerth Elektronik & Kg
The Wurth Elektronik 750311422 is a Datacom Transformer with 2 primary windings, 1500V isolation voltage, and 50uH inductance. It has dimensions of L17.75xB13.46xH12.7 mm and is suitable for applications requiring a max operating temperature of 125°C, output current of 4A, and turns ratio of 5:1.
HM2102NLT
Pulse Electronics
HM2102NLT by Pulse Electronics is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 4300V. With inductance of 450uH, it operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high voltage isolation.
1000B-5002XNL
1000B-5002XNL by Pulse Electronics is a Datacom Transformer with 8 functions, inductance of 350uH, and dimensions L17.53xB12.19xH5.72 (mm). Ideal for 10/100/1000 BASE-T applications, it operates b/w -55 to 125 °C and features surface mounting method.
TG1G-E001NYLF
Halo Electronics
TG1G-E001NYLF by Halo Electronics is a DATACOM TRANSFORMER with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for 10/100 BASE-TX and ETHERNET applications, it operates b/w -40 to 85 °C with surface mount feature.
96046123309
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Minimum Operating Temperature: -40 Cel; Isolation Voltage: 1500 V; Turns Ratio (Np:Ns): 1:2; Width: 23.4 mm;
1002C
Murata Power Solutions
PULSE TRANSFORMER; Mounting Feature: PCB MOUNT; Minimum ET Product: 200 V-us; Packing Method: TUBE; Height: 15.75 mm; Maximum Operating Temperature: 70 Cel;
TG110-S050N2
TG110-S050N2 by Halo Electronics is a Datacom Transformer with 2 functions, 1500V isolation voltage, and 2.5ns max pulse rise time. Ideal for Ethernet applications, it operates b/w 0-70°C and has dimensions of L12.7xB7.11xH5.08mm for surface mount installation.
H1102FNL
H1102FNL by Pulse Electronics is a UL-approved Datacom Transformer with 1500V isolation voltage, 1.1dB insertion loss, and 350uH primary inductance. Ideal for surface mount applications in data communication systems due to its compact dimensions of L12.7xB9.09xH5.99 (mm).
96046213059
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 12.5 mm; Maximum Operating Temperature: 85 Cel; Length: 14 mm; Minimum Operating Temperature: -40 Cel;
PM-DB2762+
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Turns Ratio (Np:Ns): 1:2.5; Width: 10.16 mm; No. of Functions: 2;
7490220123
Wurth Elektronik 7490220123 is a Pulse & Datacom Transformer with 4 functions and 1500V isolation voltage. Ideal for 1000 BASE-T applications, it has an inductance of 180uH, operates b/w -40 to 105°C, and features a surface mount design.
B78476A8065A003
TDK
TDK B78476A8065A003 is a Pulse & Datacom Transformer with 1 function and an isolation voltage of 1500V. It has dimensions of L12.7XB7.11XH5.6 (mm) and is suitable for LAN; 10/100 BASE-T applications.
1011
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Height: 15.75 mm; Minimum ET Product: 200 V-us;
749012011
749012011 by Wurth Elektronik is a Pulse & Datacom Transformer with an Isolation Voltage of 1500V, Insertion Loss of 1dB, and Primary Inductance of 350uH. It is designed for applications in 10/100 BASE-T networks, featuring dimensions of 17.1mm x 14.75mm x 8.4mm and a temperature range from 0°C to 70°C.
750311595
Wuerth Elektronik & Kg 750311595 is a DATACOM TRANSFORMER with 1500V isolation voltage, 12uH inductance, and 3A output current. It is used for pulse applications in data communication systems due to its compact dimensions of L32.31xB27.03xH13.69 (mm) and surface mounting feature.
1000B-5002XNLT
1000B-5002XNLT by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. It is designed for 10/100/1000 BASE-T applications, with inductance of 350uH and operating temperatures ranging from -55 to 125 °C.
HCTSM80101AALE1
Bourns
Bourns HCTSM80101AALE1 pulse transformer offers 5000V isolation voltage, 250uH inductance, and 1:1 turns ratio. Ideal for AEC-Q200 approved applications requiring high isolation and temperature range from -40 to 125°C. Suitable for surface mount with dimensions of 6.5x10.8x12.3mm, it is commonly used in datacom systems.
HX5004NLT
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5004; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Dimensions: 17.53mm X 12.2mm X 5.51mm;
78602/2JC
Murata Manufacturing
Murata Manufacturing's 78602/2JC is a pulse transformer with 1000V isolation voltage, 380uH primary inductance, and 10 V-us min ET product. It is used for datacom applications requiring surface mounting feature and a compact size of 6.35mm x 9mm x 12.7mm.
1080
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Dimensions: 15.06mm X 15.06mm X 15.75mm; Maximum Operating Temperature: 70 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7490100111A
Wurth Elektronik
7490100111A by Wuerth Elektronik & Kg is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 1500V. It has an insertion loss of 1.1 dB, inductance of 350uH, and operates b/w -40 to 105°C. Primarily used in LAN applications due to its compact dimensions (12.7mm x 8.8mm x 6.35mm) and surface mount feature for easy installation.
749020023A
The Wurth Elektronik 749020023A is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. It has inductance of 350uH, suitable for 10/100/1000 BASE-T applications. With a compact size of 15.1x10x4.25mm and surface mount feature, it operates b/w -40 to +85°C temperature range.
749010012A
749010012A by Wurth Elektronik is a Pulse & Datacom Transformer with 1500V isolation voltage, 350uH inductance, and dimensions of L12.7xB8.8xH6.35 mm. It is used for 10/100 BASE-TX, AUTOMDIX, and LAN applications due to its surface mount feature and 1:1 turns ratio for primary to secondary winding.
749013011A
Wurth Elektronik 749013011A is a Pulse & Datacom Transformer with 1500V isolation voltage, 1.1dB insertion loss, and primary inductance of 350uH. Ideal for applications like 10/100 BASE-TX, AUTOMDIX, and LAN due to its compact dimensions of L12.7xB8.8xH6.35mm and surface mounting feature.
749010012
The Wurth Elektronik 749010012 is a pulse and datacom transformer with UL approval. It has an isolation voltage of 1500 V, insertion loss of 1.1 dB, and primary inductance of 350 uH. This surface mount transformer is suitable for LAN applications such as 10/100 BASE-TX networks.
749020100A
749020100A by Wurth Elektronik is a pulse & datacom transformer with an isolation voltage of 1500V. It has a primary inductance of 350uH and dimensions of L12.7XB8.6XH3.0 (mm). This transformer is suitable for LAN applications, specifically for 10/100/1000 BASE-T networks.
749020111A
Wurth Elektronik's 749020111A is a DATACOM TRANSFORMER with 1:1 Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for applications like 1000 BASE-T Ethernet networks, featuring Tin (Sn) over Copper (Cu) Terminal Finish and Surface mounting Feature.
749020010A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: Tin (Sn) over Copper (Cu); Maximum Operating Temperature: 85 Cel; No. of Functions: 4;
7490100110A
Wurth Elektronik's 7490100110A is a UL-approved transformer with 1500V isolation voltage, 1.1dB insertion loss, and 350uH inductance. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to +85°C and features surface mounting method.
749020011A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: TIN OVER NICKEL; Dimensions: L17.5XB14.2XH6.0 (mm); JESD-609 Code: e3;
749020010
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749020010; Approvals (V): UL; No. of Functions: 1; Minimum Operating Temperature: 0 Cel;
7490140122B
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Length: 17.1 mm; Application: 10/100 BASE-T; Maximum Operating Temperature: 85 Cel;
7490120110
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: Tin (Sn); Width: 9.27 mm; No. of Functions: 1;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749012011; Terminal Finish: TIN SILVER; Minimum Operating Temperature: 0 Cel; Turns Ratio (Np:Ns): 1:1; 1:1;
7490140123B
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Application: 10/100 BASE-T; No. of Functions: 1; Packing Method: TR, 13 INCH;
749010013
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; CSA; Terminal Finish: TIN COPPER; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH;
7490100161A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 7490100161A; Approvals (V): UL; Terminal Finish: Tin/Copper (Sn/Cu); No. of Functions: 1;
749010310
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH; Maximum Operating Temperature: 85 Cel; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH;
7490220120
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN OVER NICKEL; Maximum Operating Temperature: 105 Cel; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
749013040
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749013040; Approvals (V): UL; Maximum Operating Temperature: 70 Cel; Height: 7.24 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved