Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ALAN210001-3J41DT by Abracon is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for LAN, 10/100/1000 BASE-T, and Ethernet applications. Compact at 6.2mm height, 12.44mm width, and 18.38mm length with surface mount feature for easy installation.
Median Price
$2.410
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Newark
1+ parts
$3.180
100+ parts
-
1k+ parts
10k+ parts
Master Electronics
$2.340
Verical
$2.090
Chip1Stop
$2.480
Nova Conductors
$2.408
Vyrian
NAC Semi
$4.160
Rapid Electronics
$1.920
TME
$5.380
$4.410
IBS Electronics
$2.087
VNN
Semicontronic
$1.420
$1.384
$1.377
Aranea Global
$2.360
$2.266
Continental Prestige Electronics
Argo Parts USA
Ampacity Inc.
$3.090
Corohmni
$3.339
Aztec Data Supply Inc.
$3.490
Having multiple functions in a single transformer allows for more efficient use of space and simplifies circuit design.
High isolation voltage ensures safe operation and helps in protecting sensitive circuitry from voltage spikes.
The specified inductance value helps in maintaining stable signal transmission and reducing signal distortion.
The specified packing method makes it convenient for automated assembly processes and ensures consistent product quality.
This product is suitable for various data communication applications like LAN, 10/100/1000 BASE-T, and Ethernet, making it versatile for different networking needs.
A high maximum operating temperature ensures reliable performance even under demanding environmental conditions.
The specified minimum operating temperature range allows for consistent operation in a wide range of temperature environments.
The compact height of the transformer makes it suitable for applications where space is limited.
The specified width dimension contributes to the overall compact design of the transformer, making it easier to integrate into circuit layouts.
Being specifically designed for data communication applications, this transformer ensures optimized performance in such scenarios.
The surface mount feature simplifies installation and allows for easy integration into PCB layouts, saving assembly time.
The specified length dimension provides further insight into the overall compact size of the transformer, making it suitable for space-constrained applications.
Having a 1:1 turns ratio ensures efficient power transfer and stability in signal transmission, contributing to overall performance reliability.
Pulse & Datacom Transformers ALAN210001-3J41DT attributes and parameters. Explore more Pulse & Datacom Transformers devices from Abracon
Application:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
Abracon is a trusted supplier of leading-edge and innovative electronic components including Frequency Control, Timing, Power, Magnetics, RF and Antenna solutions. Servicing world-class companies across the data communication, transportation, industrial, medical, consumer, aerospace, and defense industries, Abracon accelerates customers’ time-to-market by providing unmatched product solutions, technical expertise, and service excellence.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Zetex Plc
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
LL4148-GS08
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
1009
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Minimum ET Product: 550 V-us; Dimensions: 15.06mm X 15.06mm X 15.75mm;
HX1260FNLT
Pulse Electronics
HX1260FNLT by Pulse Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems due to its compact L12.7xB9.09xH5.99 (mm) dimensions and wide operating temperature range (-40°C to 85°C).
SM13072APEL
Bourns
SM13072APEL by Bourns is a DATACOM TRANSFORMER with 1500V isolation voltage, 350uH inductance, and AEC-Q200 approval. Ideal for 10/100 BASE-T, ETHERNET, and LAN applications due to its compact L12.8xB6.9xH5.65mm size and surface mounting feature. Operating temperature ranges from -40°C to 125°C.
HX5008NL
HX5008NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, this transformer operates b/w -40°C to 85°C with a frequency range from 1MHz to 100MHz.
SD250-3L
Coilcraft
Coilcraft's SD250-3L is a Pulse Transformer with 3750V Isolation Voltage, 1500uH Primary Inductance, and 375V-us Min ET Product. Ideal for BASE/GATE DRIVE applications, it operates b/w -40 to 85°C temperatures and features Tin/Silver terminal finish.
74040
Pico Electronics
The Pico Electronics 74040 is a pulse transformer with an isolation voltage of 500V and inductance of 1300uH. It is approved for MIL-PRF-21038 and commonly used in datacom applications.
96046323299
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Minimum Operating Temperature: -40 Cel; Packing Method: TRAY; Width: 14 mm; Length: 14.5 mm;
HM2102NLT
HM2102NLT by Pulse Electronics is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 4300V. With inductance of 450uH, it operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high voltage isolation.
IL-20-0001
Schurter Ag
IL-20-0001 by Schurter Ag is a 1.1W Pulse Transformer with 4000V isolation voltage and 1500ns max pulse rise time. Ideal for datacom applications, it features inductance of 3000uH, operates b/w -25 to 70°C, and has dimensions of L28.0xB23.0xH14.0mm for through-hole mounting.
TG1G-S002NZRL
Halo Electronics
TG1G-S002NZRL by Halo Electronics is a DATACOM TRANSFORMER with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for 10/100 BASE-TX Ethernet applications with operating temperatures from 0 to 70°C. Compact surface mount design measuring 5.84mm x 12.19mm x 17.18mm.
1621
C&d Technologies
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1600; Maximum Operating Temperature: 70 Cel; Turns Ratio (Np:Ns): 1:2; Minimum Operating Temperature: 0 Cel;
HX1188FNL
HX1188FNL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH primary inductance, and dimensions of L12.7xB9.09xH5.99 mm. Ideal for surface mount applications, it operates b/w -40°C to 85°C, making it suitable for various data communication systems.
HX5004NL
HX5004NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, it operates b/w -40°C to 85°C with a frequency range from 1MHz to 100MHz.
PM-DB2791S
Holt Integrated Circuits
PM-DB2791S by Holt Integrated Circuits is a MIL-STD-1553 approved Pulse & Datacom Transformer with dimensions of L15.87xB15.87xH6.35 mm. It operates b/w -55 to 130°C, has a turns ratio of 1:2.5, and uses Tin/Lead terminal finish. Ideal for DATA BUS INTERFACE applications due to its surface mount feature and DATACOM TRANSFORMER type design.
1001C
Murata Power Solutions
PULSE TRANSFORMER; Mounting Feature: PCB MOUNT; Maximum Operating Temperature: 70 Cel; Height: 15.75 mm; Turns Ratio (Np:Ns): 1:1; Minimum ET Product: 200 V-us;
100B-1003XT
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN LEAD; Packing Method: TR; Dimensions: L12.7XB6.73XH5.97 (mm); Maximum Operating Temperature: 125 Cel;
96046323469
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Turns Ratio (Np:Ns): 1:1.414; Height: 12.5 mm; Width: 13.5 mm; Minimum Operating Temperature: -40 Cel;
PE-68386NL
PE-68386NL by Pulse Electronics is a pulse transformer with 1500V isolation voltage, 785uH primary inductance, and 9.7 V-us min ET product. Ideal for gate drive applications, it operates b/w -40 to 130 °C at a frequency of 50 KHz.
ALAN210001-3J41DT
Abracon
78253/55C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 78253; Terminal Finish: Tin (Sn); Minimum ET Product: 35 V-us; Dimensions: 9.52mm X 8.89mm X 6.35mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ALAN-2301
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, 13 INCH; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH;
ALAN-2302
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 13 INCH; Minimum Operating Temperature: -40 Cel; Width: 14.2 mm;
ALANL100X1-DE12DT
ALANL100X1-DE12DT by Abracon is a Datacom Transformer with 2 functions, 1500V isolation voltage, and 350uH inductance. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications due to its compact size (12.7x7.11x2.15mm) and surface mount feature. Operating temperature range from -40°C to 85°C ensures reliable performance in various environments.
ALANS100X1-1E10LT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; No. of Functions: 2; Inductance (Primary): 350 uH; Width: 11.7 mm;
ALAN-101T
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: ALAN-101; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH; Width: 6.87 mm;
ALANC10001-CDB3DT
ALANC10001-CDB3DT by Abracon is a DATACOM TRANSFORMER with 1500V Isolation Voltage, 200uH Inductance, and 1CT:1CT Turns Ratio. Ideal for 10/100/1000 BASE-T, ETHERNET, and LAN applications due to its compact size and surface mount feature. Operating temperature range from -40°C to 85°C makes it versatile for various environments.
ALAN210001-3J60KT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 12.44 mm; Minimum Operating Temperature: -40 Cel; Turns Ratio (Np:Ns): 1CT:1CT; Length: 18.38 mm;
ALAN210001-3J61KT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 18.38 mm; Application: LAN; 10/100/1000 BASE-T; ETHERNET; Inductance (Primary): 350 uH; Maximum Operating Temperature: 125 Cel;
ALAN210001-3JC0KT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: LAN; 10/100/1000 BASE-T; ETHERNET; Packing Method: TR, 13 INCH; Width: 12.44 mm; Turns Ratio (Np:Ns): 1CT:1CT;
ALAN210001-3J41KT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Width: 12.44 mm; Packing Method: TR, 13 INCH; Application: LAN; 10/100/1000 BASE-T; ETHERNET;
ALAN210001-3J41ET
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, 13 INCH; Width: 12.44 mm; Minimum Operating Temperature: 0 Cel; No. of Functions: 4;
ALAN210001-3JC0JT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 350 uH; Width: 12.44 mm; Height: 6.2 mm; Length: 18.38 mm;
ALAN210001-3JC0ET
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 350 uH; Maximum Operating Temperature: 70 Cel; Length: 18.38 mm; Height: 6.2 mm;
ALAN210001-3J61ET
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 6.2 mm; Width: 12.44 mm; Turns Ratio (Np:Ns): 1CT:1CT; Minimum Operating Temperature: 0 Cel;
ALAN210001-3J60DT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Turns Ratio (Np:Ns): 1CT:1CT; Application: LAN; 10/100/1000 BASE-T; ETHERNET; No. of Functions: 4; Width: 12.44 mm;
ALAN210001-3JC0DT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Functions: 4; Turns Ratio (Np:Ns): 1CT:1CT; Length: 18.38 mm;
ALAN210001-3J61DT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, 13 INCH; Isolation Voltage: 1500 V; Length: 18.38 mm; Maximum Operating Temperature: 85 Cel;
ALAN210001-3J61JT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 18.38 mm; Application: LAN; 10/100/1000 BASE-T; ETHERNET; No. of Functions: 4; Isolation Voltage: 1500 V;
ALAN210001-3J60ET
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 4; Turns Ratio (Np:Ns): 1CT:1CT; Length: 18.38 mm; Height: 6.2 mm;
ALAN210001-3J41JT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, 13 INCH; Length: 18.38 mm; Isolation Voltage: 1500 V; Height: 6.2 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved