Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ALANL100X1-DE12DT by Abracon is a Datacom Transformer with 2 functions, 1500V isolation voltage, and 350uH inductance. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications due to its compact size (12.7x7.11x2.15mm) and surface mount feature. Operating temperature range from -40°C to 85°C ensures reliable performance in various environments.
Median Price
$2.230
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
$1.760
1k+ parts
$1.410
10k+ parts
$1.270
Arrow
$2.236
$1.778
$1.329
-
Mouser Electronics
$2.390
$1.820
$1.630
$1.550
Master Electronics
$1.370
$1.110
Verical
$1.661
$1.465
IBS Electronics
$1.781
$1.711
NAC Semi
$2.470
Vyrian
VNN
Nova Conductors
Ampacity Inc.
$1.260
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Having 2 functions allows for versatile use and compatibility in a variety of applications.
High isolation voltage ensures safe operation and protection against voltage spikes.
The inductance value provides efficient performance and signal transmission.
The TR packing method in 13 Inch size ensures secure packaging for shipping and handling.
Designed for networking applications, making it ideal for LAN, Ethernet, and high-speed data transmission.
With a high maximum operating temperature, this transformer can withstand heat and maintain performance under various conditions.
The low minimum operating temperature allows for reliable operation in cold environments.
Compact height makes it suitable for space-constrained applications.
Narrow width allows for efficient layout and space-saving design in electronic circuitry.
Specifically designed for data communication applications, ensuring optimal performance in data transmission.
Surface mount capability enables easy and secure installation on PCBs, saving time and effort in assembly.
The moderate length provides a balanced size for accommodating the necessary components in a circuit design.
A turns ratio of 1CT:1CT ensures balanced signal transmission and optimal impedance matching.
Pulse & Datacom Transformers ALANL100X1-DE12DT attributes and parameters. Explore more Pulse & Datacom Transformers devices from Abracon
Application:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
ALANL100X1-DE12DT Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Abracon is a trusted supplier of leading-edge and innovative electronic components including Frequency Control, Timing, Power, Magnetics, RF and Antenna solutions. Servicing world-class companies across the data communication, transportation, industrial, medical, consumer, aerospace, and defense industries, Abracon accelerates customers’ time-to-market by providing unmatched product solutions, technical expertise, and service excellence.
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
EU2B-YS303C
Idec
ROTARY SWITCH;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
Taitron Components
Yageo
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
HX5008NLT
Pulse Electronics
HX5008NLT by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and operates at frequencies up to 100000 KHz. Ideal for applications like 1000 BASE-T, this transformer is designed for surface mount with dimensions of L15.24xB13.64xH5.47 (mm).
H5007NL
H5007NL by Pulse Electronics is a 4-function datacom transformer with 1 dB insertion loss and 1500 V isolation voltage. Ideal for 1000 BASE-T applications, it operates b/w 0-70°C with dimensions of L17.53xB12.2xH5.26 mm, featuring a surface mount design and tin/copper terminal finish (Sn/Cu).
PM-DB2791S
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 1; Application: DATA BUS INTERFACE; Length: 10.16 mm;
HX1198FNLT
HX1198FNLT by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and -40 to 85°C operating temperature range. It is ideal for surface mount applications in data communication and pulse transformer circuits.
ALT4532P-181-T05G
TDK
ALT4532P-181-T05G by TDK is a DATACOM TRANSFORMER with inductance of 180uH, suitable for 1000 BASE-T and 2.5/5G BASE-T LAN applications. It operates b/w -40°C to 105°C, with dimensions of 4.5mm x 3.2mm x 2.9mm for surface mount installation.
1013C
Murata Power Solutions
PULSE TRANSFORMER; Mounting Feature: PCB MOUNT; Terminal Finish: Matte Tin (Sn); Packing Method: TUBE; Minimum ET Product: 200 V-us; Turns Ratio (Np:Ns): 1:1:1;
TS21CHF
Bothhand Usa
TS21CHF by Bothhand Usa is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1CT:1CT turns ratio. Ideal for 10/100 BASE applications, it operates b/w 0-70°C and features surface mounting method.
74215
Pico Electronics
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038; Terminal Finish: Tin/Lead (Sn/Pb); Isolation Voltage: 500 V; Dimensions: L13.97XB13.97XH8.38 (mm);
1009
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Length: 15.06 mm; Minimum Operating Temperature: 0 Cel;
Q1553-22
Inrcore
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Height: 6.35 mm; Additional Features: STANDARD: MIL-PRF-21038; No. of Functions: 1;
HX1188NLT
HX1188NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1650V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems due to its compact L12.7xB7.11xH5.97 (mm) dimensions and wide operating temperature range (-40°C to 85°C).
HX5401NL
HX5401NL by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. Ideal for Ethernet applications, it operates b/w -40°C to 85°C. With dimensions of 28.45mm x 17.27mm x 11.18mm, this surface mount transformer has a turns ratio of 1:1 and is designed for data communication systems.
1080
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Dimensions: 15.06mm X 15.06mm X 15.75mm; Maximum Operating Temperature: 70 Cel;
1001
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Width: 15.06 mm; No. of Functions: 1;
TG110-E050N5LF
Halo Electronics
Halo Electronics' TG110-E050N5LF is a DATACOM TRANSFORMER with 1500V isolation voltage, 0.4uH inductance, and 1CT:1CT turns ratio. Ideal for 10/100 BASE-TX and ETHERNET applications, it operates b/w -40 to 85 °C with dimensions of L12.7xB7.11xH6.35 mm for surface mount installation.
PM-DB2745S+
Holt Integrated Circuits
PM-DB2745S+ by Holt Integrated Circuits is a MIL-STD-1553 approved Pulse & Datacom Transformer with 4000Ω impedance, suitable for DATA BUS INTERFACE applications. It operates b/w -55°C to 130°C, has 3 windings, and dimensions of L23.62xB16.0xH3.937 mm, making it ideal for surface mount installations.
DA2318-ALC
Coilcraft
Coilcraft's DA2318-ALC is a pulse transformer with 1500V isolation voltage, 680uH inductance, and 40.8 V-us min ET product. Ideal for gate drive applications, it operates b/w -40 to 125 °C with a frequency range of 50 KHz to 2000 KHz.
749013011A
Wuerth Elektronik & Kg
Wurth Elektronik 749013011A is a Pulse & Datacom Transformer with 1500V isolation voltage, 1.1dB insertion loss, and primary inductance of 350uH. Ideal for applications like 10/100 BASE-TX, AUTOMDIX, and LAN due to its compact dimensions of L12.7xB8.8xH6.35mm and surface mounting feature.
78253/55MVC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 78253; Terminal Finish: Tin (Sn); No. of Functions: 1; Application: GENERAL PURPOSE;
HX6096NLT
HX6096NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1:1 turns ratio, UL approved for ETHERNET applications. It offers 1500V isolation voltage, 1.2dB insertion loss, and inductance of 350uH. With dimensions of L18.2xB12.2xH6.6 mm, it operates b/w -40 to 85°C and supports 0.72A output current in TAPE & REEL packing method for surface mount installation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ALAN210001-3J41DT
Abracon
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: LAN; 10/100/1000 BASE-T; ETHERNET; Inductance (Primary): 350 uH; Width: 12.44 mm; Turns Ratio (Np:Ns): 1CT:1CT;
ALAN-2301
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, 13 INCH; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH;
ALAN-2302
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 13 INCH; Minimum Operating Temperature: -40 Cel; Width: 14.2 mm;
ALANS100X1-1E10LT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; No. of Functions: 2; Inductance (Primary): 350 uH; Width: 11.7 mm;
ALAN-101T
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: ALAN-101; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH; Width: 6.87 mm;
ALANC10001-CDB3DT
ALANC10001-CDB3DT by Abracon is a DATACOM TRANSFORMER with 1500V Isolation Voltage, 200uH Inductance, and 1CT:1CT Turns Ratio. Ideal for 10/100/1000 BASE-T, ETHERNET, and LAN applications due to its compact size and surface mount feature. Operating temperature range from -40°C to 85°C makes it versatile for various environments.
ALANL100X1-DE10KT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: LAN; 10/100 BASE-TX; ETHERNET; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH;
ALANL100X1-DE12KB
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Length: 12.7 mm; No. of Functions: 2; Packing Method: BULK;
ALANL100X1-DE12KT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 2.15 mm; Width: 7.11 mm; Packing Method: TR, 13 INCH; Isolation Voltage: 1500 V;
ALANL100X1-DE62KB
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: LAN; 10/100 BASE-TX; ETHERNET; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH; Turns Ratio (Np:Ns): 1CT:1CT;
ALANL100X1-DED2KB
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel; No. of Functions: 2; Application: LAN; 10/100 BASE-TX; ETHERNET;
ALANL100X1-DE10KB
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Application: LAN; 10/100 BASE-TX; ETHERNET; Width: 7.11 mm; Inductance (Primary): 350 uH;
ALANL100X1-DE10EB
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 2.15 mm; Packing Method: BULK; Width: 7.11 mm; Minimum Operating Temperature: 0 Cel;
ALANL100X1-DE12DB
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Application: LAN; 10/100 BASE-TX; ETHERNET; Height: 2.15 mm; Turns Ratio (Np:Ns): 1CT:1CT;
ALANL100X1-DED2EB
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: LAN; 10/100 BASE-TX; ETHERNET; Height: 2.15 mm; No. of Functions: 2; Minimum Operating Temperature: 0 Cel;
ALANL100X1-DE10DB
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: BULK; Length: 12.7 mm; Width: 7.11 mm;
ALANL100X1-DED2ET
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 7.11 mm; Height: 2.15 mm; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel;
ALANL100X1-DE12JB
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 105 Cel; Height: 2.15 mm; Width: 7.11 mm; Turns Ratio (Np:Ns): 1CT:1CT;
ALANL100X1-DE62DT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 350 uH; Minimum Operating Temperature: -40 Cel; Isolation Voltage: 1500 V; Height: 2.15 mm;
ALANL100X1-DED2JB
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 2; Inductance (Primary): 350 uH; Height: 2.15 mm; Packing Method: BULK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved