Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's 78604/4MC is a UL-approved pulse transformer with 1000V isolation voltage, 100uH inductance, and 2:1 turns ratio. It is used in datacom applications for surface mounting, offering dimensions of L9.52xB9.0xH6.35mm and operating temperatures from 0 to 70°C.
Median Price
$1.480
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
Continental Prestige Electronics
$1.450
Argo Parts USA
Advanced Electronics
$1.510
Corohmni
$4.914
Aztec Data Supply Inc.
$6.040
AZTECH Wire
$15.420
Bastille Electronics
Robosynatics
Lucentia Tech
$6.555
$6.070
Having UL approval ensures the product meets safety standards and regulations, making it a reliable and trusted choice.
High isolation voltage of 1000V ensures safe operation and prevents electrical hazards, making it suitable for applications requiring high voltage protection.
With an inductance of 100uH, this transformer can efficiently store and release energy, making it ideal for applications that require smooth power delivery.
The minimum ET product of 4 V-us indicates efficient energy transfer, resulting in minimal energy loss and improved overall performance.
Compact dimensions make this transformer easy to integrate into various electronic devices without taking up much space.
With a wide operating temperature range of 0-70°C, this transformer can function reliably in different environmental conditions.
The matte tin terminal finish ensures good connectivity and corrosion resistance, increasing the longevity of the product.
The surface mount feature enables easy and secure installation of the transformer on PCBs, saving space and simplifying the assembly process.
The 2:1 turns ratio allows for efficient voltage transformation, making this transformer suitable for a wide range of voltage conversion applications.
Pulse & Datacom Transformers 78604/4MC attributes and parameters. Explore more Pulse & Datacom Transformers devices from Murata Manufacturing
Application:
Approvals (V):
Minimum ET Product:
Height:
Isolation Voltage:
JESD-609 Code:
Length:
Manufacturer Series:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
78604/4MC Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
Promax-johnton
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
EU2B-YS3303C
Idec
ROTARY SWITCH;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
North American Philips Discrete Products Div
Transys Electronics
HX1198NLT
Pulse Electronics
HX1198NLT by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1CT turns ratio. It is designed for surface mount applications in pulse and data communication systems. With dimensions of L12.7xB7.11xH5.97 mm, it operates b/w -40°C to 85°C temperature range efficiently.
H5020NLT
H5020NLT by Pulse Electronics is a datacom transformer with 4 functions and windings. It offers an isolation voltage of 1500V and insertion loss of 1dB, suitable for applications like 1000BASE-T. With dimensions of L27.94xB7.54xH8.33 (mm) and surface mounting feature, it operates b/w -40°C to +85°C at frequencies up to 100MHz.
96046213059
Littelfuse
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 12.5 mm; Maximum Operating Temperature: 85 Cel; Length: 14 mm; Minimum Operating Temperature: -40 Cel;
PM-DB2791S+
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Turns Ratio (Np:Ns): 1:2.5; Width: 10.16 mm; Additional Features: HEGHT DIM INCLUDES TERMINAL ALSO;
749020010A
Wuerth Elektronik & Kg
Wurth Elektronik's 749020010A is a Pulse & Datacom Transformer with UL approval and 1500V isolation voltage. It has 4 functions, 1dB insertion loss, and primary inductance of 350uH. Ideal for LAN applications like 1000 BASE-T, it operates b/w -40 to 85°C with dimensions L17.5xB14.20xH6.50mm for surface mounting.
SM91501AL-E
Bourns
Bourns SM91501AL-E is a pulse transformer with 2 functions, 150uH inductance, and 4300V isolation voltage. Ideal for battery management systems, it operates b/w -40 to 125°C and has a turns ratio of 1CT:1CT. Measuring 14.81x11.68x5mm, it's AEC-Q200 approved for automotive applications.
749010013
Wurth Elektronik 749010013 is a Datacom Transformer with 2 primary windings, 22 secondary windings, and an isolation voltage of 1500V. It has dimensions of L12.95xBW7.11xH5.23 mm and operates b/w -40 to 85 °C. Ideal for applications requiring high-frequency data transmission in compact spaces.
TG110-E050N5LF
Halo Electronics
Halo Electronics' TG110-E050N5LF is a DATACOM TRANSFORMER with 1500V isolation voltage, 0.4uH inductance, and 1CT:1CT turns ratio. Ideal for 10/100 BASE-TX and ETHERNET applications, it operates b/w -40 to 85 °C with dimensions of L12.7xB7.11xH6.35 mm for surface mount installation.
TG110-S050N2RL
Halo Electronics' TG110-S050N2RL is a Pulse & Datacom Transformer with 1500V isolation voltage, 1.1dB insertion loss, and 0.4uH inductance. Ideal for 10/100 BASE-TX and Ethernet applications, it operates b/w 0-70°C with dimensions of L12.7xB7.112xH5.08mm for surface mount installation.
PM-DB2776
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 2; Height: 4.699 mm; Width: 10.16 mm;
H5008NL
H5008NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, this transformer operates b/w -40°C to +70°C with dimensions of L15.24xB13.64xH5.47mm and a max frequency of 100000KHz.
1000B-5002XNLT
1000B-5002XNLT by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. It is designed for 10/100/1000 BASE-T applications, with inductance of 350uH and operating temperatures ranging from -55 to 125 °C.
P0584NL
P0584NL by Pulse Electronics is a pulse transformer used for gate drive applications. It has an isolation voltage of 3000 V, inductance of 450 uH, and operates b/w -40 to 125 °C temperature range.
S558-5999-U7-F
Bel Fuse
Bel Fuse's S558-5999-U7-F is a Pulse & Datacom Transformer with 2 primary windings and 22 secondary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for LAN applications supporting 10/100 BASE-T networks, it operates b/w -40 to 85°C with dimensions L12.32xB7.24xH5.72mm for surface mount installation.
DA101JC
Murata Manufacturing
Murata Manufacturing's DA101JC is a Pulse & Datacom Transformer with 2000V isolation voltage, 1000uH inductance, and 15 V-us min ET product. Ideal for data transmission applications, it operates b/w -40 to 85 °C and features surface mounting at dimensions of 9x6.35x9.52 mm.
Q1553-20
Q1553-20 by Pulse Electronics is a through-hole mounted pulse transformer with dimensions of 12.7x8.89x6.35mm. It operates b/w -55°C to 130°C, with a turns ratio of 1:1.41. Ideal for pulse and datacom applications requiring compact size and reliable performance in various temperature conditions.
HX5004NLT
HX5004NLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH primary inductance. It is designed for applications like 1000 BASE-T networks, operates b/w -40°C to 85°C, and has dimensions of L17.53xB12.2xH5.26 mm for surface mount assembly.
H1260T
H1260T by Pulse Electronics is a DATACOM TRANSFORMER with 1500V Isolation Voltage, 350uH Inductance, and 1:1 Turns Ratio. It is designed for 10/100 BASE-T applications, featuring compact dimensions of L12.7xB7.11xH6.0 (mm) and surface mounting feature for easy integration in networking equipment. Operating temperature ranges from 0 to 70°C, making it suitable for various data communication setups.
6158-00
6158-00 by Wurth Elektronik is a DATACOM TRANSFORMER with 1500V isolation voltage. Measuring 26.924mm x 6.858mm x 6.096mm, it's ideal for ATM, 100 BASE-TX, and TP-PMD applications. Featuring a Turns Ratio of 1CT:1CT and THROUGH HOLE MOUNTED design, it comes in TUBE packaging for easy handling.
LP5018ANL
Link-pp Int'l Technology
LP5018ANL by Link-pp Int'l Technology is a pulse & datacom transformer with 4 functions. It has an isolation voltage of 1500 V and primary inductance of 350 uH. This transformer is commonly used in applications such as 10/100 BASE-TX Ethernet.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
78601/2C
Murata Manufacturing's 78601/2C is a pulse transformer with 1000V isolation voltage, 500uH primary inductance, and 10 V-us min ET product. Ideal for datacom applications, it features through-hole mounting, measures 6.35mm (H) x 9mm (W) x 9.52mm (L), and has a turns ratio of 1:1.
78602/16C
78602/16C by Murata Manufacturing is a pulse transformer with an isolation voltage of 1000 V. It has a primary inductance of 4000 uH and a min ET product of 28 V-us. This transformer is commonly used in pulse and datacom applications.
78602/1JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786J; Terminal Finish: Matte Tin (Sn); Additional Features: CENTER TAPPED SECONDARY; Packing Method: TAPE & REEL;
78602/16JC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Turns Ratio (Np:Ns): 1:1:1; Width: 9 mm; Height: 6.35 mm; Inductance (Primary): 3350 uH;
78602/8C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Isolation Voltage: 1000 V; Application: GENERAL PURPOSE; Packing Method: TUBE; Length: 9.52 mm;
78604/4JC
Murata Manufacturing's 78604/4JC is a pulse transformer with 1000V isolation voltage, 65uH primary inductance, and 4 V-us min ET product. Ideal for datacom applications, it is a surface mount transformer with dimensions of 6.35mm x 9mm x 12.7mm and a turns ratio of 2:1.
78602/2JC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TUBE; Isolation Voltage: 1000 V; Inductance (Primary): 380 uH; Length: 12.7 mm;
78601/16JC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: GENERAL PURPOSE; Width: 9 mm; Minimum ET Product: 28 V-us; Length: 12.7 mm;
78602/16MC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Approvals (V): UL; Terminal Finish: Matte Tin (Sn); Application: GENERAL PURPOSE;
78604/3C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; No. of Functions: 1; Length: 9.52 mm; Width: 9 mm; Isolation Voltage: 1000 V;
78601/9C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Width: 9 mm; Turns Ratio (Np:Ns): 1:1; Minimum ET Product: 56 V-us; Height: 6.35 mm;
78604/4M-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Minimum Operating Temperature: 0 Cel; Turns Ratio (Np:Ns): 2:1; No. of Functions: 1;
78604/4
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 786; Inductance (Primary): 100 uH; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel;
78604/1MC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Approvals (V): UL; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: 0 Cel;
78604/1MC
78604/4MC-R
78604/8MC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Approvals (V): UL; Terminal Finish: Matte Tin (Sn); Turns Ratio (Np:Ns): 2:1;
78604/9MC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Approvals (V): UL; Terminal Finish: Matte Tin (Sn); Dimensions: L9.52XB9.0XH6.35 (mm);
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Terminal Finish: Tin/Lead (Sn/Pb); Minimum ET Product: 4 V-us; No. of Functions: 1;
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 786; Terminal Finish: Tin/Lead (Sn/Pb); Application: GENERAL PURPOSE; JESD-609 Code: e0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved