Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's 78602/2JC is a pulse transformer with 1000V isolation voltage, 380uH primary inductance, and 10 V-us min ET product. It is used for datacom applications requiring surface mounting feature and a compact size of 6.35mm x 9mm x 12.7mm.
Median Price
$2.320
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.720
1k+ parts
$1.600
10k+ parts
$1.540
DigiKey
$1.900
$1.712
$1.590
Nova Conductors
$1.313
-
VNN
Vyrian
Continental Prestige Electronics
$1.250
$1.040
Aranea Global
$1.287
$1.235
Argo Parts USA
AZTECH Wire
$5.802
Perfect Parts
High isolation voltage ensures safe operation and prevents any electrical interference between circuits.
Higher inductance allows for efficient energy transfer and better performance in pulse and data communication applications.
Tube packing provides easy handling and protection during transportation and storage.
A higher minimum ET product indicates better efficiency and capability to handle fast switching speeds in data communication.
Low profile design saves space and allows for compact integration in electronic devices.
Optimal width for surface mounting on PCBs and ensures compatibility with standard board layouts.
Specifically designed for pulse applications, providing accurate signal transmission and efficient energy conversion.
Surface mount capability simplifies the assembly process and allows for easy integration into electronic circuits.
A standard length that offers a balanced size for efficient energy transfer and compatibility with various electronic devices.
Equal turns ratio ensures balanced power distribution and accurate signal transmission in pulse and data communication systems.
Pulse & Datacom Transformers 78602/2JC attributes and parameters. Explore more Pulse & Datacom Transformers devices from Murata Manufacturing
Application:
Minimum ET Product:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
78602/2JC Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Vicor
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
New Jersey Semiconductor Products
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
BAV99
ROHM
DA2320-ALC
Coilcraft
Coilcraft's DA2320-ALC is a Pulse Transformer with 1500V isolation voltage, 264uH primary inductance, and 24.5 V-us min ET product. Ideal for gate drive applications, it operates b/w -40 to 125 °C with a frequency range of 50 KHz to 2000 KHz.
M21038/27-07
Hytronics
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: M21038/27; Approvals (V): MIL-PRF-21038/27E; Application: GENERAL PURPOSE; Width: 8.89 mm;
T4032
Pulse Electronics
T4032 by Pulse Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage, 11900uH inductance, and 1.25CS:1CT turns ratio. It is designed for ISDN applications, featuring dimensions of L13.46xB13.11xH12.07mm and surface mounting feature on TRAY packing method.
PM-DB2725EX
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 130 Cel; Height: 6.1 mm;
7490100161A
Wuerth Elektronik & Kg
Wurth Elektronik's 7490100161A transformer offers 1500V isolation voltage, 1.1dB insertion loss, and 350uH inductance. Ideal for applications like 10/100 BASE-TX, AUTOMDIX, and LAN due to its compact dimensions of L12.7xB8.8xH6.35 (mm) and surface mounting feature. Operating temperature ranges from -40°C to 125°C with a tin/copper terminal finish.
PM-DB2725EX+
Holt Integrated Circuits
PM-DB2725EX+ by Holt Integrated Circuits is a MIL-STD-1553 approved datacom transformer with dimensions of 10.16x10.16x6.1 mm. It operates b/w -55°C to 130°C, has turns ratios of 1:2.5 and 1:1.79, and uses matte tin terminal finish. Ideal for data bus interfaces, it features through-hole mounting for reliable performance in various applications.
78601/16JC
Murata Manufacturing
Murata Manufacturing's 78601/16JC is a pulse transformer with 1000V isolation voltage, 3650uH inductance, and 28 V-us min ET product. It is a surface mount type used for datacom applications due to its compact size and balanced turns ratio of 1:1.
7490220123
Wurth Elektronik 7490220123 is a Pulse & Datacom Transformer with 4 functions and 1500V isolation voltage. Ideal for 1000 BASE-T applications, it has an inductance of 180uH, operates b/w -40 to 105°C, and features a surface mount design.
HX5084NL
Pulse Electronics' HX5084NL is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems due to its compact L15.24xB7.62xH4.14 (mm) dimensions and -40 to 85°C operating temperature range.
H2019NLT
H2019NLT by Pulse Electronics is a Datacom Transformer with 2 primary windings and 22 secondary windings. It offers an isolation voltage of 1500V, insertion loss of 1.2dB, and inductance of 350uH. Ideal for applications such as 10/100 BASE-TX and Ethernet, this transformer operates b/w -40°C to +70°C with dimensions of L12.70xB7.11xH5.97mm.
PM-DB2791S+
PM-DB2791S+ by Holt Integrated Circuits is a DATACOM TRANSFORMER with MIL-STD-1553 approval. It has a turns ratio of 1:2.5 and operates b/w -55°C to 130°C. Ideal for DATA BUS INTERFACE applications, it is compact at 10.16mm x 4.699mm x 10.16mm for surface mount installation.
PM-DB2745D
PM-DB2745D by Holt Integrated Circuits is a DATACOM TRANSFORMER with MIL-STD-1553 approval. It has dimensions of L23.62xB16.0xH3.937 mm and operates b/w -55 to 130 °C. Ideal for DATA BUS INTERFACE, it features a turns ratio of 1:2.5 and 1:1.79, making it suitable for through-hole mounting applications.
78604/3C
Murata Manufacturing's 78604/3C is a pulse transformer with 1000V isolation voltage, 200uH inductance, and 6V-us min ET product. Ideal for datacom applications, it features a 2:1 turns ratio and through-hole mounting for efficient performance in compact spaces.
IL-10-0003
Schurter Ag
IL-10-0003 by Schurter Ag is a pulse transformer with 3500V isolation voltage, 1000ns max pulse rise time, and 1500uH primary inductance. Ideal for datacom applications, it operates b/w -25°C to 70°C temperatures and has a nominal input voltage of 380V.
PM-DB2745S
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Impedance (Primary): 4000 OHMS; Application: DATA BUS INTERFACE; Minimum Operating Frequency: 75 KHz;
PM-DB2745S+
PM-DB2745S+ by Holt Integrated Circuits is a MIL-STD-1553 approved Pulse & Datacom Transformer with 4000Ω impedance, suitable for DATA BUS INTERFACE applications. It operates b/w -55°C to 130°C, has 3 windings, and dimensions of L23.62xB16.0xH3.937 mm, making it ideal for surface mount installations.
77202C
Murata Manufacturing's 77202C is a pulse transformer with 2500V isolation voltage, 1000uH inductance, and 120 V-us min ET product. It is ideal for datacom applications due to its through-hole mounting feature and compact dimensions of 12.3mm x 20.3mm x 25.4mm.
SM51108PEL
Bourns
Bourns SM51108PEL is a Pulse & Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1CT:1CT turns ratio. Ideal for 10/100 BASE-TX, Ethernet, and LAN applications due to its compact L12.8xB6.9xH5.65mm size and surface mounting feature. Operating temperature range from -40°C to 85°C makes it versatile for various environments.
CEP99-102
Sumida
Sumida's CEP99-102 is a pulse transformer with 2 functions and an isolation voltage of 2500 V. It is used in battery management systems, operates b/w -40 to 125 °C, and has dimensions of 10mm x 9mm x 9.2mm.
1082
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Dimensions: 15.06mm X 15.06mm X 15.75mm; Turns Ratio (Np:Ns): 100:1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
78601/2C
Murata Manufacturing's 78601/2C is a pulse transformer with 1000V isolation voltage, 500uH primary inductance, and 10 V-us min ET product. Ideal for datacom applications, it features through-hole mounting, measures 6.35mm (H) x 9mm (W) x 9.52mm (L), and has a turns ratio of 1:1.
78602/16C
78602/16C by Murata Manufacturing is a pulse transformer with an isolation voltage of 1000 V. It has a primary inductance of 4000 uH and a min ET product of 28 V-us. This transformer is commonly used in pulse and datacom applications.
78602/1JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786J; Terminal Finish: Matte Tin (Sn); Additional Features: CENTER TAPPED SECONDARY; Packing Method: TAPE & REEL;
78602/16JC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Turns Ratio (Np:Ns): 1:1:1; Width: 9 mm; Height: 6.35 mm; Inductance (Primary): 3350 uH;
78602/8C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Isolation Voltage: 1000 V; Application: GENERAL PURPOSE; Packing Method: TUBE; Length: 9.52 mm;
78604/4JC
Murata Manufacturing's 78604/4JC is a pulse transformer with 1000V isolation voltage, 65uH primary inductance, and 4 V-us min ET product. Ideal for datacom applications, it is a surface mount transformer with dimensions of 6.35mm x 9mm x 12.7mm and a turns ratio of 2:1.
78604/4MC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Approvals (V): UL; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: 0 Cel;
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: GENERAL PURPOSE; Width: 9 mm; Minimum ET Product: 28 V-us; Length: 12.7 mm;
78602/16MC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Approvals (V): UL; Terminal Finish: Matte Tin (Sn); Application: GENERAL PURPOSE;
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; No. of Functions: 1; Length: 9.52 mm; Width: 9 mm; Isolation Voltage: 1000 V;
78601/9C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Width: 9 mm; Turns Ratio (Np:Ns): 1:1; Minimum ET Product: 56 V-us; Height: 6.35 mm;
78602/2JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 1; Maximum Operating Temperature: 85 Cel; Additional Features: CENTER TAPPED SECONDARY; Isolation Voltage: 1000 V;
78602/2M-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Length: 9.52 mm; Width: 8.89 mm; Minimum ET Product: 10 V-us;
78602/2
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 786; Packing Method: TUBE; Minimum Operating Temperature: 0 Cel; Turns Ratio (Np:Ns): 1:1:1;
78602/2MC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Approvals (V): UL; Terminal Finish: Matte Tin (Sn); Packing Method: TAPE & REEL;
78602/2MC
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Terminal Finish: Tin/Lead (Sn/Pb); Dimensions: 9.52mm X 8.89mm X 6.35mm; Inductance (Primary): 500 uH;
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 786; Terminal Finish: Tin/Lead (Sn/Pb); Isolation Voltage: 1000 V; Minimum ET Product: 10 V-us;
78602/9C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Isolation Voltage: 1000 V; Packing Method: TUBE; Width: 9 mm; Length: 9.52 mm;
78602/2C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Terminal Finish: MATTE TIN; Height: 6.35 mm; Width: 9 mm; Length: 9.52 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved