Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HX5008FNLT by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. It has an insertion loss of 3dB, inductance of 325uH, and operates b/w -40°C to 85°C. This transformer is UL approved and designed for surface mount applications in pulse and data communication systems.
Median Price
$5.540
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Farnell
1+ parts
100+ parts
$4.220
1k+ parts
-
10k+ parts
Chip1Stop
$6.820
$5.720
Mouser Electronics
$7.750
$5.650
$5.350
$5.200
Newark
$8.830
$7.060
$6.380
$6.130
Element14
$12.310
$10.900
DigiKey
$5.762
$5.522
TTI Europe
$4.631
TTI
$5.060
$4.820
Avnet
$4.245
$3.995
Arrow
$4.899
Verical
Future Electronics
$7.020
Master Electronics
$4.920
$4.760
$4.550
Maritex
$6.087
$4.734
$4.285
$4.122
Nova Conductors
$8.271
Chip Stock
Vyrian
Bristol Electronics
IBS Electronics
$5.978
A&K Electronics
Rotakorn
Electro Sonic
$10.440
$9.560
$8.920
NAC Semi
$12.760
Sensible Micro Corp
TME
$4.710
Prism Electronics
Continental Prestige Electronics
$11.480
Microchip USA
$17.550
$17.440
$17.390
$17.330
Perfect Parts
Argo Parts USA
Netroflash
$8.105
$7.857
$7.692
UL approval ensures this product meets safety and quality standards, giving customers peace of mind.
Having 4 functions in one device increases efficiency and saves space in the circuit design.
High isolation voltage helps prevent electrical interference and ensures reliable performance in data communication applications.
Low insertion loss means minimal signal loss during transmission, maintaining high data integrity.
Appropriate inductance level ensures optimal performance and signal quality in pulse and data communication applications.
Tape and reel packaging facilitates automated assembly processes, saving time and reducing manual handling.
Compact size makes it suitable for space-constrained applications and easy integration into circuit layouts.
High operating temperature range allows for reliable performance in various environmental conditions.
Wide temperature range ensures the transformer can operate in extreme cold conditions without compromising functionality.
Matte tin finish with nickel barrier offers excellent solderability and corrosion resistance for long-term durability.
Specifically designed for data communication applications, ensuring compatibility and optimal performance in such systems.
Surface mount design simplifies installation and allows for smaller PCB footprint, ideal for modern electronic devices.
Equal turns ratio provides balanced signal conversion, maintaining signal integrity and quality in pulse and data communication.
Pulse & Datacom Transformers HX5008FNLT attributes and parameters. Explore more Pulse & Datacom Transformers devices from Pulse Electronics
Additional Features:
Application:
Approvals (V):
Height:
Insertion Loss:
Isolation Voltage:
JESD-609 Code:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Inductance (Primary):
Sub-Category:
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
HX5008FNLT Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Devs Location 10/Jan/2022
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Bytesonic Electronics
749010310
Wuerth Elektronik & Kg
Wurth Elektronik 749010310 is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 85°C and features surface mounting at dimensions of 12.7mm x 8.67mm x 4.25mm.
H1086NL
Pulse Electronics
H1086NL by Pulse Electronics is a Datacom Transformer with 1 dB Insertion Loss, 1500 V Isolation Voltage, and 111 Secondary Windings. It is designed for 10/100 BASE-T applications, operates b/w 0-70°C temperatures, and has dimensions of L25.4xB12.83xH5.97 mm for surface mount installation.
ISRA-0239-D502
Schurter Ag
Schurter Ag's ISRA-0239-D502 is a VDE-approved pulse transformer with 3200V isolation voltage, 100ns max pulse rise time, and 2200uH primary inductance. Ideal for datacom applications, it operates b/w -25°C to 100°C, features surface mounting, and has dimensions of L22.7xB22.3xH14.0 (mm).
74020
Pico Electronics
The Pico Electronics 74020 pulse transformer features an isolation voltage of 500V, inductance of 2400uH, and min ET product of 40V-us. Ideal for datacom applications, this through-hole mounted transformer operates b/w -55°C to 130°C with dimensions of L11.43xB11.43xH7.11mm.
TG110-S050N2RL
Halo Electronics
Halo Electronics' TG110-S050N2RL is a Pulse & Datacom Transformer with 1500V isolation voltage, 1.1dB insertion loss, and 0.4uH inductance. Ideal for 10/100 BASE-TX and Ethernet applications, it operates b/w 0-70°C with dimensions of L12.7xB7.112xH5.08mm for surface mount installation.
TG1G-E001NYLF
TG1G-E001NYLF by Halo Electronics is a DATACOM TRANSFORMER with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for 10/100 BASE-TX and ETHERNET applications, it operates b/w -40 to 85 °C with surface mount feature.
HX2019FNL
HX2019FNL by Pulse Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage, 1.2dB insertion loss, and 350uH inductance. Ideal for surface mount applications in data communication systems due to its compact size (12.7mm x 9.09mm x 5.99mm) and operating temperature range (-40°C to 85°C).
P0585NL
Pulse Electronics P0585NL is a Pulse Transformer with 3000V isolation voltage, 450uH inductance, and 92 V-us min ET product. Ideal for GATE DRIVE applications, it operates b/w -40 to 125 °C with dimensions of L20.57xB12.19xH19.05 mm and PCB MOUNT feature.
DCT20EFD-U32S003
TDK
DCT20EFD-U32S003 by TDK is a DATACOM TRANSFORMER with 1000V Isolation Voltage, 10uH Inductance, and 1:10 Turns Ratio. It is designed for surface mount applications in pulse and data communication systems.
H1164NLT
H1164NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1CT:1CT Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for 10/100 BASE-TX applications, operates b/w 0-70°C, and has IEEE approval. Ideal for surface mount installations with dimensions of L28.58xB12.19xH5.84 mm.
78253/55VC
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 78253; Terminal Finish: Tin (Sn); Minimum ET Product: 35 V-us; Dimensions: 9.52mm X 8.89mm X 6.35mm;
78604/3C
Murata Manufacturing
Murata Manufacturing's 78604/3C is a pulse transformer with 1000V isolation voltage, 200uH inductance, and 6V-us min ET product. Ideal for datacom applications, it features a 2:1 turns ratio and through-hole mounting for efficient performance in compact spaces.
CR7983-CLD
Coilcraft
CR7983-CLD by Coilcraft is a Pulse & Datacom Transformer with 5000V isolation voltage, 256uH inductance, and 1:2 turns ratio. Ideal for data communication applications due to its surface mounting feature and nominal input voltage of 5V. Operating temperature ranges from -40°C to 125°C.
1001C
Murata Power Solutions
PULSE TRANSFORMER; Mounting Feature: PCB MOUNT; Maximum Operating Temperature: 70 Cel; Height: 15.75 mm; Turns Ratio (Np:Ns): 1:1; Minimum ET Product: 200 V-us;
100B-1003XNL
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Width: 6.98 mm; Length: 12.95 mm; Dimensions: L12.7XB6.73XH5.97 (mm);
HM5149NL
HM5149NL by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and 1500V isolation voltage. It has primary inductance of 360uH, AEC-Q200 approval, and operates b/w -40 to 125°C. Ideal for surface mount applications in data communication systems.
HX5084NL
Pulse Electronics' HX5084NL is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems due to its compact L15.24xB7.62xH4.14 (mm) dimensions and -40 to 85°C operating temperature range.
HM2102NLT
HM2102NLT by Pulse Electronics is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 4300V. With inductance of 450uH, it operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high voltage isolation.
96046123219
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; Turns Ratio (Np:Ns): 1.2:1; Width: 14 mm; Length: 14.5 mm;
ALAN210001-3J41DT
ALAN210001-3J41DT by Abracon is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for LAN, 10/100/1000 BASE-T, and Ethernet applications. Compact at 6.2mm height, 12.44mm width, and 18.38mm length with surface mount feature for easy installation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HX5008NL
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5008; Terminal Finish: Matte Tin (Sn); Length: 15.24 mm; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO;
HX5008NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, this transformer operates b/w -40°C to 85°C with a frequency range from 1MHz to 100MHz.
HX5008NLT
HX5008NLT by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and operates at frequencies up to 100000 KHz. Ideal for applications like 1000 BASE-T, this transformer is designed for surface mount with dimensions of L15.24xB13.64xH5.47 (mm).
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5008; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Height: 5.72 mm;
HX5020NL
HX5020NL by Pulse Electronics is a 4-function datacom transformer with an isolation voltage of 1500V and insertion loss of 1.2dB. It is designed for applications like 1000BASE-T, operates b/w -40°C to 85°C, and has dimensions of L27.94xB7.54xH8.33mm for surface mount installation.
HX5004NLT
HX5004NLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH primary inductance. It is designed for applications like 1000 BASE-T networks, operates b/w -40°C to 85°C, and has dimensions of L17.53xB12.2xH5.26 mm for surface mount assembly.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5004; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Dimensions: 17.53mm X 12.2mm X 5.51mm;
HX5004NL
HX5004NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, it operates b/w -40°C to 85°C with a frequency range from 1MHz to 100MHz.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5004; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Isolation Voltage: 1500 V;
HX5008FNL
HX5008FNL by Pulse Electronics is a UL-approved datacom transformer with 4 functions and 1500V isolation voltage. It features an insertion loss of 3dB, inductance of 325uH, and operates b/w -40 to 85°C. This surface-mount transformer has dimensions of L17.86xB13.16xH6.12mm, making it ideal for various data communication applications.
HX5020NLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5020NL; Approvals (V): UL; Isolation Voltage: 1500 V; No. of Functions: 4;
HX5084FNLT
HX5084FNLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH inductance. It is designed for surface mount applications in data communication systems, offering a compact size of L15.24xB6.41xH4.14 (mm) and operating temperatures ranging from -40 to 85°C.
HX5084NLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 4.14 mm; Length: 15.24 mm; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: GENERAL PURPOSE; Isolation Voltage: 1500 V; Width: 7.62 mm; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved