Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5004; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Dimensions: 17.53mm X 12.2mm X 5.51mm;
Median Price
$8.780
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Farnell
1+ parts
$8.660
100+ parts
$7.000
1k+ parts
-
10k+ parts
Chip1Stop
$8.900
$5.630
$5.120
$4.480
DigiKey
$9.900
$8.040
Mouser Electronics
$7.440
$6.580
Element14
$11.013
$7.386
Newark
$12.470
$9.240
Verical
$7.249
Arrow
$6.253
$6.216
Master Electronics
$6.420
$6.010
$5.810
TTI
$7.150
$6.910
Nova Conductors
$7.601
Bristol Electronics
$8.664
$4.072
$3.725
Ozdisan Elektronik
$11.822
Chip Stock
Rutronik
$6.310
TME
$9.060
IBS Electronics
$9.565
$8.681
$8.513
Dan-Mar Components
Vyrian
ACDS - Activité Composants Distribution Service
Electro Sonic
$6.360
$6.290
Atlantic Semiconductor
Velocity Electronics
ComSIT Distribution GmbH
Semi Source
EMSNET
Prism Electronics
Corohmni
$4.287
Semicontronic
$4.560
$4.446
$4.423
Ampacity Inc.
Aztec Data Supply Inc.
$4.655
Advanced Electronics
$6.855
$6.512
Netroflash
Continental Prestige Electronics
$10.570
Perfect Parts
GreenTree Electronics
Authorized Procurement Solutions
Argo Parts USA
RC Electronics
$7.840
$7.390
$7.240
Kepictronics
Epart123
Speed Components Ltd (Excess)
Pulse & Datacom Transformers HX5004NLT attributes and parameters. Explore more Pulse & Datacom Transformers devices from Pulse Specialty Components
Additional Features:
Application:
Height:
Isolation Voltage:
JESD-609 Code:
Length:
Manufacturer Series:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
HX5004NLT Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Devs Supplier 28/Oct/2021
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
1N4148
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
CRGCQ0805F10R
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203C
Idec
ROTARY SWITCH;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
1019
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Minimum Operating Temperature: 0 Cel; Height: 15.75 mm;
96046323369
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): IEC; Length: 14.5 mm; Height: 13.5 mm; Isolation Voltage: 1875 V;
SM453229-381N7Y
Bourns
Bourns SM453229-381N7Y is a Datacom Transformer with 380uH inductance, 1500V isolation voltage, and 1:1 turns ratio. Ideal for LAN applications supporting 10/100/1000 BASE-T networks. Compact at L4.7xB3.22xH2.9mm, surface mountable with -40 to 85°C operating range.
78613/3JC-R
Murata Manufacturing
Murata Manufacturing's 78613/3JC-R is a pulse transformer with 1000V isolation voltage, 190uH inductance, and 6 V-us min ET product. It is used for datacom applications, featuring surface mounting and dimensions of L9.52xB9.0xH6.65 mm. Operating temperatures range from -40 to 85°C.
78601/2C
Murata Manufacturing's 78601/2C is a pulse transformer with 1000V isolation voltage, 500uH primary inductance, and 10 V-us min ET product. Ideal for datacom applications, it features through-hole mounting, measures 6.35mm (H) x 9mm (W) x 9.52mm (L), and has a turns ratio of 1:1.
PE-68386NL
Pulse Electronics
PE-68386NL by Pulse Electronics is a pulse transformer with 1500V isolation voltage, 785uH primary inductance, and 9.7 V-us min ET product. Ideal for gate drive applications, it operates b/w -40 to 130 °C at a frequency of 50 KHz.
78602/16JC
78602/16JC by Murata Manufacturing is a pulse transformer with an isolation voltage of 1000 V. It has an inductance of 3350 uH and a min ET product of 28 V-us. This surface mount transformer is commonly used in pulse and datacom applications.
PT61018PEL
The Bourns PT61018PEL is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1CT:1CT turns ratio. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications. It operates b/w -40°C to 85°C and features surface mounting method.
PA2002NLT
PA2002NLT by Pulse Electronics is a pulse transformer with 3 functions, 1500V isolation voltage, and 60ns max pulse rise time. Ideal for gate drive applications, it operates b/w -40 to 130°C and has dimensions of L9.02xB8.64xH7.62mm for surface mounting.
750813134
Wuerth Elektronik & Kg
Wurth Elektronik 750813134 is a DATACOM TRANSFORMER with 4500V isolation voltage, 600uH inductance, and 8:1 turns ratio. Ideal for pulse & datacom applications due to its compact L16.5xB18.0xH18.0 (mm) size and through-hole mounting feature. Operating range from -40°C to 125°C makes it versatile for various environments.
DA2320-ALB
Coilcraft
Coilcraft's DA2320-ALB is a pulse transformer with 1500V isolation voltage, 264uH primary inductance, and 24.5 V-us min ET product. Ideal for gate drive applications, this surface-mount transformer operates b/w -40 to 125°C with a compact size of L6.6xB5.0xH5.4 mm.
Q4470-B
Coilcraft's Q4470-B is a DATACOM transformer with 1500V isolation voltage, 400uH inductance, and 27 V-us min ET product. Ideal for RS-232 data interfaces, it operates b/w -40°C to 85°C and comes in tape & reel packing.
750311691
Wurth Elektronik 750311691 is a Datacom Transformer with inductance of 60uH, output current of 0.001A, and max DC unbalance current of 250mA. It operates b/w -40 to 125°C, has dimensions L8.26xB6.6xH5.59mm, and is suitable for applications requiring a turns ratio of 5:1 at frequencies up to 200KHz.
H6062FNL
H6062FNL by Pulse Electronics is a Datacom Transformer with 4 functions and an isolation voltage of 1500V. It has primary inductance of 350uH, operates b/w 0-70°C, and features a compact size of 5.72x15.24x17.5mm. Ideal for surface mount applications in data communication systems due to its 1:1 turns ratio and high isolation capability.
HM5149NLT
HM5149NLT by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. With inductance of 360uH, it operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high performance in a compact form factor.
H2019NLT
H2019NLT by Pulse Electronics is a Datacom Transformer with 2 primary windings and 22 secondary windings. It offers an isolation voltage of 1500V, insertion loss of 1.2dB, and inductance of 350uH. Ideal for applications such as 10/100 BASE-TX and Ethernet, this transformer operates b/w -40°C to +70°C with dimensions of L12.70xB7.11xH5.97mm.
HX1260FNL
Pulse Electronics' HX1260FNL is a Datacom Transformer with 1500V isolation voltage, 350uH primary inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems, it operates b/w -40°C to 85°C temperatures efficiently.
Q1553-20
Q1553-20 by Pulse Electronics is a through-hole mounted pulse transformer with dimensions of 12.7x8.89x6.35mm. It operates b/w -55°C to 130°C, with a turns ratio of 1:1.41. Ideal for pulse and datacom applications requiring compact size and reliable performance in various temperature conditions.
ALAN-2302
Abracon
ALAN-2302 by Abracon is a DATACOM TRANSFORMER with 4 functions and 1650V isolation voltage. It has primary inductance of 350uH, suitable for 100/1000 BASE-T applications. With dimensions of 5.2mm x 14.2mm x 17.5mm, it operates b/w -40°C to +85°C and features a turns ratio of 1CT:1CT for surface mount installation.
760301302
The Wurth Elektronik 760301302 is a Pulse Transformer with an isolation voltage of 2500V, inductance of 750uH, and min ET product of 102 V-us. It is designed for GATE DRIVE applications, operates b/w -40 to 125 °C, and features TIN NICKEL terminal finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HX5008NL
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5008; Terminal Finish: Matte Tin (Sn); Length: 15.24 mm; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO;
HX5008NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, this transformer operates b/w -40°C to 85°C with a frequency range from 1MHz to 100MHz.
HX5008NLT
HX5008NLT by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and operates at frequencies up to 100000 KHz. Ideal for applications like 1000 BASE-T, this transformer is designed for surface mount with dimensions of L15.24xB13.64xH5.47 (mm).
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5008; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Height: 5.72 mm;
HX5020NL
HX5020NL by Pulse Electronics is a 4-function datacom transformer with an isolation voltage of 1500V and insertion loss of 1.2dB. It is designed for applications like 1000BASE-T, operates b/w -40°C to 85°C, and has dimensions of L27.94xB7.54xH8.33mm for surface mount installation.
HX5004NLT
HX5004NLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH primary inductance. It is designed for applications like 1000 BASE-T networks, operates b/w -40°C to 85°C, and has dimensions of L17.53xB12.2xH5.26 mm for surface mount assembly.
HX5004NL
HX5004NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, it operates b/w -40°C to 85°C with a frequency range from 1MHz to 100MHz.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5004; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Isolation Voltage: 1500 V;
HX5008FNL
HX5008FNL by Pulse Electronics is a UL-approved datacom transformer with 4 functions and 1500V isolation voltage. It features an insertion loss of 3dB, inductance of 325uH, and operates b/w -40 to 85°C. This surface-mount transformer has dimensions of L17.86xB13.16xH6.12mm, making it ideal for various data communication applications.
HX5020NLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5020NL; Approvals (V): UL; Isolation Voltage: 1500 V; No. of Functions: 4;
HX5084FNLT
HX5084FNLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH inductance. It is designed for surface mount applications in data communication systems, offering a compact size of L15.24xB6.41xH4.14 (mm) and operating temperatures ranging from -40 to 85°C.
HX5084NLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 4.14 mm; Length: 15.24 mm; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH;
HX5008FNLT
HX5008FNLT by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. It has an insertion loss of 3dB, inductance of 325uH, and operates b/w -40°C to 85°C. This transformer is UL approved and designed for surface mount applications in pulse and data communication systems.
HX5084NL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: GENERAL PURPOSE; Isolation Voltage: 1500 V; Width: 7.62 mm; No. of Functions: 1;
HX5004T
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5004T; Width: 12.2 mm; Minimum Operating Temperature: -40 Cel; Isolation Voltage: 1500 V;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5004; Isolation Voltage: 1500 V; Packing Method: TAPE & REEL; Application: 1000 BASE-T;
HX5004
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5004; Length: 17.53 mm; Height: 5.51 mm; Dimensions: 17.53mm X 12.2mm X 5.51mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved