Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HX5008NLT by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and operates at frequencies up to 100000 KHz. Ideal for applications like 1000 BASE-T, this transformer is designed for surface mount with dimensions of L15.24xB13.64xH5.47 (mm).
Median Price
$6.425
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$5.440
100+ parts
$4.490
1k+ parts
$3.940
10k+ parts
$3.570
Farnell
$6.760
$5.630
-
Mouser Electronics
$7.750
$6.160
$6.090
$5.860
Newark
$8.830
$7.020
$6.850
$6.610
Element14
$19.580
$10.960
DigiKey
$5.762
$5.522
Arrow
$5.723
$5.429
Verical
$6.043
$5.641
TTI
$5.810
Avnet
Future Electronics
$7.490
Bristol Electronics
$6.840
$3.215
$3.078
Nova Conductors
$8.248
Chip Stock
Vyrian
Electro Sonic
$4.960
$4.580
$4.320
Rutronik
$4.280
NAC Semi
$13.620
Sensible Micro Corp
Component Sense
ABC Electronics Ltd.
IBS Electronics
$6.021
Netsource Technology, Inc.
Semi Source
ACDS - Activité Composants Distribution Service
Rebound Electronics
Cyclops Electronics Ltd
Prism Electronics
Elcom Components
Aztec Data Supply Inc.
$3.350
Semicontronic
$3.481
$3.463
Corohmni
$7.690
Advanced Electronics
$7.921
$7.525
Netroflash
Modulus Dynamics
$9.155
$9.063
$8.789
Continental Prestige Electronics
$11.350
Perfect Parts
Authorized Procurement Solutions
RC Electronics
$7.990
$7.300
$7.080
Epart123
Futuretech Components
Kepictronics
GreenTree Electronics
Argo Parts USA
Infinite Electronics LLP (Excess)
S.R.D Solutions
Robosynatics
$0.188
Lucentia Tech
Having IEEE approval ensures that the product meets industry standards and specifications, making it a reliable choice for use in data communication applications.
Having multiple functions allows for versatility in usage, making the product suitable for various applications within the pulse and datacom transformer category.
The high isolation voltage of 1500 V provides enhanced safety and protection in data communication systems where isolation is crucial.
The low insertion loss of 1 dB ensures minimal signal loss during transmission, leading to better overall performance and efficiency of the product.
Compact dimensions make the product suitable for space-constrained applications and ease of installation in various equipment setups.
With a high maximum operating temperature of 85°C, the product can withstand elevated temperatures without compromising performance, ensuring reliability in challenging environments.
The low minimum operating temperature of -40°C allows the product to function optimally even in extreme cold conditions, providing versatility in various operating environments.
The surface mounting feature enables easy and secure installation of the transformer on circuit boards, facilitating streamlined manufacturing processes and efficient integration within electronic systems.
Pulse & Datacom Transformers HX5008NLT attributes and parameters. Explore more Pulse & Datacom Transformers devices from Pulse Electronics
Additional Features:
Application:
Approvals (V):
Height:
Insertion Loss:
Isolation Voltage:
JESD-609 Code:
Length:
Mounting Feature:
No. of Functions:
No. of Winding (Primary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Sub-Category:
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
HX5008NLT Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
Rugao Dachang Electronic
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
ALT4532P-181-T05G
TDK
ALT4532P-181-T05G by TDK is a DATACOM TRANSFORMER with inductance of 180uH, suitable for 1000 BASE-T and 2.5/5G BASE-T LAN applications. It operates b/w -40°C to 105°C, with dimensions of 4.5mm x 3.2mm x 2.9mm for surface mount installation.
96046323309
Littelfuse
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 12.5 mm; Isolation Voltage: 1500 V; Maximum Operating Temperature: 85 Cel; Turns Ratio (Np:Ns): 1:1;
PM-DB2791S
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 1; Application: DATA BUS INTERFACE; Length: 10.16 mm;
96046123729
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Height: 11.9 mm; Packing Method: TRAY; Maximum Operating Temperature: 85 Cel; No. of Functions: 1;
HX0068ANL
Pulse Electronics
HX0068ANL by Pulse Electronics is a datacom transformer with 1500V isolation voltage, 1dB insertion loss, and matte tin terminal finish. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications. Compact at L12.7xB8.81xH2.08 (mm) with surface mounting feature.
IT248
Schaffner Holding Ag
The Schaffner Holding Ag IT248 pulse transformer has an isolation voltage of 750V, max pulse rise time of 2200ns, and inductance of 17000uH. Ideal for applications requiring high voltage isolation and fast pulse response in data communication systems.
750311423
Wuerth Elektronik & Kg
Wurth Elektronik 750311423 is a Datacom Transformer with 2 primary windings, 1500V isolation voltage, and 50uH inductance. It has dimensions of L17.75xB13.46xH12.7 mm and is used for applications requiring a max operating temperature of 125°C, output current of 4A, and output voltage of 5V.
74215
Pico Electronics
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038; Terminal Finish: Tin/Lead (Sn/Pb); Isolation Voltage: 500 V; Dimensions: L13.97XB13.97XH8.38 (mm);
LP5018ANL
Link-pp Int'l Technology
LP5018ANL by Link-pp Int'l Technology is a pulse & datacom transformer with 4 functions. It has an isolation voltage of 1500 V and primary inductance of 350 uH. This transformer is commonly used in applications such as 10/100 BASE-TX Ethernet.
96046123239
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 2; Isolation Voltage: 1875 V; Packing Method: TRAY; Maximum Operating Temperature: 85 Cel;
TM1062TXHUANL
Inrcore
TM1062TXHUANL by Inrcore is a Datacom Transformer with 4.5uH primary inductance, 0.3ns max pulse rise time, and 1:1 turns ratio. Ideal for applications requiring surface mount transformers with a temperature range of -55 to 125°C, such as data communication systems.
78613/3C
Murata Manufacturing
Murata Manufacturing's 78613/3C is a pulse transformer with 1000V isolation voltage, 200uH primary inductance, and 6 V-us min ET product. It is used for datacom applications due to its compact size (6.35mm x 9mm x 9.52mm) and through-hole mounting feature.
96046123219
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; Turns Ratio (Np:Ns): 1.2:1; Width: 14 mm; Length: 14.5 mm;
749020310
Wurth Elektronik 749020310 is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for LAN applications at temperatures ranging from -40 to 85°C. Compact design with dimensions of 17.53mm x 14.6mm x 4.5mm for surface mount installation.
1000B-5001XNL
1000B-5001XNL by Pulse Electronics is a Datacom Transformer with 4 functions, inductance of 350uH, and dimensions L17.53xB12.19xH5.72 (mm). It is used for 10/100/1000 BASE-T applications, operates b/w -55 to 125 °C, and features surface mounting method.
LP5009ANL
LP5009ANL by Link-pp Int'l Technology is a DATACOM TRANSFORMER with dimensions L13.16xB18.59xH6.12 (mm). It operates b/w -40 to 85 °C and has a Turns Ratio of 1CT:1CT for applications in 10/100 BASE-T, ETHERNET, and LAN networks. Ideal for surface mount installations due to its compact size.
HX1198NL
HX1198NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and dimensions of L12.7xB7.11xH5.97 mm. Ideal for surface mount applications in data communication systems, it operates b/w -40°C to 85°C temperatures efficiently with a turns ratio of 1:1CT; 1:1CT.
HCTSM80101AALE1
Bourns
Bourns HCTSM80101AALE1 pulse transformer offers 5000V isolation voltage, 250uH inductance, and 1:1 turns ratio. Ideal for AEC-Q200 approved applications requiring high isolation and temperature range from -40 to 125°C. Suitable for surface mount with dimensions of 6.5x10.8x12.3mm, it is commonly used in datacom systems.
7490100110A
Wurth Elektronik's 7490100110A is a UL-approved transformer with 1500V isolation voltage, 1.1dB insertion loss, and 350uH inductance. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to +85°C and features surface mounting method.
HX5084NL
Pulse Electronics' HX5084NL is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems due to its compact L15.24xB7.62xH4.14 (mm) dimensions and -40 to 85°C operating temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HX5008NL
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5008; Terminal Finish: Matte Tin (Sn); Length: 15.24 mm; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO;
HX5008NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, this transformer operates b/w -40°C to 85°C with a frequency range from 1MHz to 100MHz.
HX5008NLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5008; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Height: 5.72 mm;
HX5020NL
HX5020NL by Pulse Electronics is a 4-function datacom transformer with an isolation voltage of 1500V and insertion loss of 1.2dB. It is designed for applications like 1000BASE-T, operates b/w -40°C to 85°C, and has dimensions of L27.94xB7.54xH8.33mm for surface mount installation.
HX5004NLT
HX5004NLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH primary inductance. It is designed for applications like 1000 BASE-T networks, operates b/w -40°C to 85°C, and has dimensions of L17.53xB12.2xH5.26 mm for surface mount assembly.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5004; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Dimensions: 17.53mm X 12.2mm X 5.51mm;
HX5004NL
HX5004NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, it operates b/w -40°C to 85°C with a frequency range from 1MHz to 100MHz.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5004; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Isolation Voltage: 1500 V;
HX5008FNL
HX5008FNL by Pulse Electronics is a UL-approved datacom transformer with 4 functions and 1500V isolation voltage. It features an insertion loss of 3dB, inductance of 325uH, and operates b/w -40 to 85°C. This surface-mount transformer has dimensions of L17.86xB13.16xH6.12mm, making it ideal for various data communication applications.
HX5020NLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5020NL; Approvals (V): UL; Isolation Voltage: 1500 V; No. of Functions: 4;
HX5084FNLT
HX5084FNLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH inductance. It is designed for surface mount applications in data communication systems, offering a compact size of L15.24xB6.41xH4.14 (mm) and operating temperatures ranging from -40 to 85°C.
HX5084NLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 4.14 mm; Length: 15.24 mm; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH;
HX5008FNLT
HX5008FNLT by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. It has an insertion loss of 3dB, inductance of 325uH, and operates b/w -40°C to 85°C. This transformer is UL approved and designed for surface mount applications in pulse and data communication systems.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: GENERAL PURPOSE; Isolation Voltage: 1500 V; Width: 7.62 mm; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved