Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
7490220122 by Wurth Elektronik is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. It has primary inductance of 350uH, suitable for applications like 1000 BASE-T. With a compact size of 8.8mm x 14.7mm x 18.29mm, it operates b/w -40°C to +105°C, making it ideal for various data communication setups.
Median Price
$6.970
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$4.020
100+ parts
-
1k+ parts
10k+ parts
Bürklin Elektronik
$6.260
$5.530
$5.190
Arrow
$6.884
$5.612
$5.501
Mouser Electronics
$5.950
$5.580
DigiKey
$6.980
$5.951
$5.135
RS (Exports)
$7.172
$6.143
Newark
$8.410
$7.390
$6.880
$6.740
Verical
Nova Conductors
$5.935
Vyrian
VNN
Prism Electronics
Corohmni
$1.120
Aztec Data Supply Inc.
$3.610
Allen Electronics Distributors
$5.650
Aranea Global
$5.816
$5.584
Advanced Electronics
$6.054
Continental Prestige Electronics
$6.110
$4.770
$4.380
AZTECH Wire
$13.280
$12.750
$12.500
$12.250
Argo Parts USA
Futuretech Components
Legend Electronics Inc. (Excess)
Speed Components Ltd (Excess)
Formix International (Excess)
Having 4 functions in one transformer allows for efficient and compact design, saving space on the circuit board.
High isolation voltage ensures safety and prevents interference between different circuits, making it reliable for data communication applications.
Optimal inductance value helps in achieving efficient signal conversion and transmission in data communication systems.
TR packing method with 13-inch tape reel facilitates automated assembly processes, saving time and cost during production.
Specifically designed for 1000BASE-T applications, ensuring compatibility and reliable performance in high-speed data transmission.
High maximum operating temperature allows for reliable operation in demanding environments without risk of overheating.
Wide temperature range from -40 to 105°C ensures this transformer can function in varied operating conditions.
Low profile design with a height of 8.8mm allows for compact integration in small electronic devices or PCBs.
The moderate width of 14.7mm offers a balance between space-saving and easy handling during assembly.
Specifically designed for data communication applications, ensuring high-performance and reliable signal transmission.
Surface mountable design simplifies assembly and allows for easy integration into modern circuit board layouts.
The length of 18.29mm provides a standard size for compatibility with various electronic devices and circuit designs.
Equal turns ratio ensures proper signal transformation and eliminates signal distortion, maintaining data integrity.
Pulse & Datacom Transformers 7490220122 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Wurth Elektronik
Additional Features:
Application:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
7490220122 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Secos
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
Good-ark Electronics
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Philips Components
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Yangzhou Yangjie Electronics
BSS138DW-7-F
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
78250MC
C&d Technologies
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 78250; Terminal Finish: Tin (Sn); Width: 8.89 mm; Maximum Operating Temperature: 85 Cel;
750311423
Wuerth Elektronik & Kg
Wurth Elektronik 750311423 is a Datacom Transformer with 2 primary windings, 1500V isolation voltage, and 50uH inductance. It has dimensions of L17.75xB13.46xH12.7 mm and is used for applications requiring a max operating temperature of 125°C, output current of 4A, and output voltage of 5V.
1000B-5002XT
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: 10/100/1000 BASE-T; No. of Functions: 4; Turns Ratio (Np:Ns): 1:1; Maximum Operating Temperature: 125 Cel;
1001C
Murata Power Solutions
PULSE TRANSFORMER; Mounting Feature: PCB MOUNT; Maximum Operating Temperature: 70 Cel; Height: 15.75 mm; Turns Ratio (Np:Ns): 1:1; Minimum ET Product: 200 V-us;
78613/4C
Murata Manufacturing
Murata Manufacturing's 78613/4C is a pulse transformer with 1000V isolation voltage, 67uH inductance, and 4 V-us min ET product. Ideal for datacom applications, it features through-hole mounting, compact dimensions of 6.35mm x 9mm x 9.52mm, and a turns ratio of 1CT:1.
IT242
Schaffner Holding Ag
IT242 by Schaffner Holding Ag is a Pulse Transformer with 2500uH primary inductance, 900ns max pulse rise time, and dimensions of L17.6xB16.7xH11.3 (mm). Ideal for GATE DRIVE applications, it operates b/w -25 to 70 °C with a 1:1:1 turns ratio and through-hole mounting feature.
PA2001NLT
Pulse Electronics
PA2001NLT by Pulse Electronics is a pulse transformer with 2 functions, 1500V isolation voltage, and 12ns max pulse rise time. Ideal for gate drive applications, it operates b/w -40 to 130°C and comes in L6.73xB8.64xH2.49mm dimensions for surface mount assembly.
HM2103NLT
HM2103NLT by Pulse Electronics is a DATACOM TRANSFORMER with 150uH inductance, 4300V isolation voltage, and AEC-Q200 approval. Ideal for surface mount applications in data communication systems due to its compact size and high isolation capabilities.
HX5008NLT
HX5008NLT by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and operates at frequencies up to 100000 KHz. Ideal for applications like 1000 BASE-T, this transformer is designed for surface mount with dimensions of L15.24xB13.64xH5.47 (mm).
PM-DB2745L+
Holt Integrated Circuits
PM-DB2745L+ by Holt Integrated Circuits is a MIL-STD-1553 approved datacom transformer with dimensions of 16.0x16.0x3.973 mm. It operates b/w -55°C to 130°C, has turns ratios of 1:2.5 and 1:1.79, and features matte tin terminal finish for surface mount applications in data bus interfaces.
HX1198NLT
HX1198NLT by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1CT turns ratio. It is designed for surface mount applications in pulse and data communication systems. With dimensions of L12.7xB7.11xH5.97 mm, it operates b/w -40°C to 85°C temperature range efficiently.
HCTSM80305BALE1
Bourns
The Bourns HCTSM80305BALE1 is a pulse transformer with 5000V isolation voltage, 300uH inductance, and 3:5 turns ratio. AEC-Q200 and IEC approved, it operates b/w -40°C to 125°C. Ideal for datacom applications due to its compact size and surface mounting feature.
1002C
Murata Manufacturing's 1002C is a pulse transformer with 2000V isolation voltage, 3000uH primary inductance, and 200 V-us min ET product. Ideal for datacom applications, it features through-hole mounting and a compact size of 15.75mm x 15.06mm x 15.06mm.
749022310
Wurth Elektronik 749022310 is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 150uH inductance. Ideal for 10/100/1000 BASE-T applications, it operates b/w -40°C to 85°C and has dimensions of 16.5mm x 10.3mm x 4.1mm for surface mount installation.
760301304
The Wurth Elektronik 760301304 is a Pulse Transformer with 2500V isolation voltage, 1080uH inductance, and 120 V-us min ET product. Ideal for GATE DRIVE applications, it operates b/w -40 to 125 °C and has a turns ratio of 2.5:1:1.
1028
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Turns Ratio (Np:Ns): 2:1:1; Inductance (Primary): 12000 uH;
ALT4532P-181-T05G
TDK
ALT4532P-181-T05G by TDK is a DATACOM TRANSFORMER with inductance of 180uH, suitable for 1000 BASE-T and 2.5/5G BASE-T LAN applications. It operates b/w -40°C to 105°C, with dimensions of 4.5mm x 3.2mm x 2.9mm for surface mount installation.
ALANS100X1-1E10LT
ALANS100X1-1E10LT by Abracon is a DATACOM TRANSFORMER with 2500V isolation voltage, 350uH inductance, and IEEE approval. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications due to its compact size (5x11.7x14.8mm) and surface mounting feature. Operating temperature range from -55°C to 125°C ensures reliable performance in various environments.
749010013
Wurth Elektronik 749010013 is a Datacom Transformer with 2 primary windings, 22 secondary windings, and an isolation voltage of 1500V. It has dimensions of L12.95xBW7.11xH5.23 mm and operates b/w -40 to 85 °C. Ideal for applications requiring high-frequency data transmission in compact spaces.
SM91501ALO-E
Bourns SM91501ALO-E is a DATACOM TRANSFORMER with 2 functions, 150uH primary inductance, and 4300V isolation voltage. It operates b/w -40 to 125 °C and has a turns ratio of 1:1. Ideal for pulse & datacom applications requiring high isolation and inductance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7490100111A
Wurth Elektronik
7490100111A by Wuerth Elektronik & Kg is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 1500V. It has an insertion loss of 1.1 dB, inductance of 350uH, and operates b/w -40 to 105°C. Primarily used in LAN applications due to its compact dimensions (12.7mm x 8.8mm x 6.35mm) and surface mount feature for easy installation.
749020023A
The Wurth Elektronik 749020023A is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. It has inductance of 350uH, suitable for 10/100/1000 BASE-T applications. With a compact size of 15.1x10x4.25mm and surface mount feature, it operates b/w -40 to +85°C temperature range.
749010012A
749010012A by Wurth Elektronik is a Pulse & Datacom Transformer with 1500V isolation voltage, 350uH inductance, and dimensions of L12.7xB8.8xH6.35 mm. It is used for 10/100 BASE-TX, AUTOMDIX, and LAN applications due to its surface mount feature and 1:1 turns ratio for primary to secondary winding.
749013011A
Wurth Elektronik 749013011A is a Pulse & Datacom Transformer with 1500V isolation voltage, 1.1dB insertion loss, and primary inductance of 350uH. Ideal for applications like 10/100 BASE-TX, AUTOMDIX, and LAN due to its compact dimensions of L12.7xB8.8xH6.35mm and surface mounting feature.
749010012
The Wurth Elektronik 749010012 is a pulse and datacom transformer with UL approval. It has an isolation voltage of 1500 V, insertion loss of 1.1 dB, and primary inductance of 350 uH. This surface mount transformer is suitable for LAN applications such as 10/100 BASE-TX networks.
749020100A
749020100A by Wurth Elektronik is a pulse & datacom transformer with an isolation voltage of 1500V. It has a primary inductance of 350uH and dimensions of L12.7XB8.6XH3.0 (mm). This transformer is suitable for LAN applications, specifically for 10/100/1000 BASE-T networks.
749020111A
Wurth Elektronik's 749020111A is a DATACOM TRANSFORMER with 1:1 Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for applications like 1000 BASE-T Ethernet networks, featuring Tin (Sn) over Copper (Cu) Terminal Finish and Surface mounting Feature.
749020010A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: Tin (Sn) over Copper (Cu); Maximum Operating Temperature: 85 Cel; No. of Functions: 4;
7490100110A
Wurth Elektronik's 7490100110A is a UL-approved transformer with 1500V isolation voltage, 1.1dB insertion loss, and 350uH inductance. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to +85°C and features surface mounting method.
749013021
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749013021; Approvals (V): UL; Terminal Finish: TIN OVER NICKEL; Isolation Voltage: 1500 V;
749020011A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: TIN OVER NICKEL; Dimensions: L17.5XB14.2XH6.0 (mm); JESD-609 Code: e3;
749020010
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749020010; Approvals (V): UL; No. of Functions: 1; Minimum Operating Temperature: 0 Cel;
7490140122B
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Length: 17.1 mm; Application: 10/100 BASE-T; Maximum Operating Temperature: 85 Cel;
7490120110
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: Tin (Sn); Width: 9.27 mm; No. of Functions: 1;
749012011
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749012011; Terminal Finish: TIN SILVER; Minimum Operating Temperature: 0 Cel; Turns Ratio (Np:Ns): 1:1; 1:1;
7490140123B
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Application: 10/100 BASE-T; No. of Functions: 1; Packing Method: TR, 13 INCH;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; CSA; Terminal Finish: TIN COPPER; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH;
7490100161A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 7490100161A; Approvals (V): UL; Terminal Finish: Tin/Copper (Sn/Cu); No. of Functions: 1;
749010310
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH; Maximum Operating Temperature: 85 Cel; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH;
7490220120
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN OVER NICKEL; Maximum Operating Temperature: 105 Cel; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved