Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Pico Electronics 74080 pulse transformer features an isolation voltage of 500V, inductance of 200uH, and min ET product of 12V-us. Ideal for MIL-PRF-21038 approved applications requiring a compact transformer with dimensions L11.43xB11.43xH7.11mm and operating temperatures from -55°C to 130°C.
Median Price
$3.299
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
$3.145
10k+ parts
SOS electronic
$2.343
$1.876
TME
$3.410
$2.380
$2.330
ACDS - Activité Composants Distribution Service
Vyrian
NAC Semi
$4.680
J2 Sourcing AB
Nova Conductors
Advanced Electronics
$3.079
$2.925
AZTECH Wire
$7.788
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
This product meets military standards, ensuring high quality and reliability.
With an isolation voltage of 500V, this transformer provides effective isolation between primary and secondary circuits, enhancing safety and preventing electrical interference.
The inductance value of 200uH helps in maintaining a stable signal transmission and reducing signal distortion.
The minimum ET product of 12V-us indicates efficient energy transfer and performance.
Compact dimensions make this transformer suitable for applications where space is limited.
With a wide operating temperature range from -55°C to 130°C, this transformer can perform reliably in various environmental conditions.
The tin/lead (Sn/Pb) terminal finish provides good solderability and ensures stable electrical connections.
The through-hole mounting feature simplifies installation and enhances the mechanical stability of the transformer.
Being a pulse transformer, it is designed to efficiently transfer high-energy pulses with minimal signal distortion.
With a turns ratio of 3:3:1, this transformer is designed to match impedance and ensure optimal signal transfer in the circuit.
Pulse & Datacom Transformers 74080 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Pico Electronics
Application:
Approvals (V):
Minimum ET Product:
Height:
Isolation Voltage:
JESD-609 Code:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
74080 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5133-00-228-1365, 5133002281365, 5330-14-464-1941, 5330144641941, 5815-00-126-7828, 5815001267828, 6625-15-139-7025, 6625151397025
NIIN
002281365, 144641941, 001267828, 151397025
Founded in 1967 by Mr. Joseph Sweeney and Mr. Henry Spoldi, Pico Electronics was established to improve and reduce the size of transformers and converters - which at the time were quite large. They began developing miniature and ultra-miniature units of high quality and reliability for military specifications and commercial air flight applications. With the new technologies that allow for surface mounting and other installation venues, Pico Electronics has come to be known as "the" resource for 'anything that flies' using a miniature conductor or transformer. Additionally, Pico Electronics became the experts in miniature DC to DC power converters and miniature AC to DC power supplies. Over the years Pico established itself as a leader in high voltage DC to DC output (the high voltage outputs that meet today's modern requirements of up to 10,000 volts DC). Today, Pico Electronics is constantly improving the efficiency of the power source and power factor correction, and is extending their high voltage product line. Pico offers ultra-miniature packages and high power units (up to 300 watts) as well as regulated, programmable, and dual output packages. They are able to accommodate many different input voltages in both the DC range, anywhere from 5 volts DC to 380 volts DC, and in the AC to DC range, having universal AC input. The never-ending drive to push the high voltage envelope - and the reduction of the size and weight from rack type systems into brick and half brick modules - is why Pico Electronics' DC to DC converters, transformers and inductors can be found everywhere - from the single engine aircraft to the international space station to Sojourner (the mobile module that landed on Mars).
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
78604/4MC
Murata Manufacturing
Murata Manufacturing's 78604/4MC is a UL-approved pulse transformer with 1000V isolation voltage, 100uH inductance, and 2:1 turns ratio. It is used in datacom applications for surface mounting, offering dimensions of L9.52xB9.0xH6.35mm and operating temperatures from 0 to 70°C.
1011
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Height: 15.75 mm; Minimum ET Product: 200 V-us;
HM2113ZNL
Pulse Electronics
HM2113ZNL by Pulse Electronics is a DATACOM TRANSFORMER with 1:1 Turns Ratio, 150uH Inductance, and 4300V Isolation Voltage. It operates b/w -40 to 125 °C and has AEC-Q200 approval. Ideal for surface mount applications in data communication systems.
TG110-AEX50N5LF
Halo Electronics
TG110-AEX50N5LF by Halo Electronics is a pulse & datacom transformer with 1 function and an isolation voltage of 1500V. It has an inductance of 350uH and is suitable for applications such as 10/100 BASE-TX Ethernet.
78250MC-R
Murata Manufacturing's 78250MC-R is a DATACOM TRANSFORMER with 1500V Isolation Voltage, 1000uH Inductance, and UL Approval. It is used for RS-232 DATA INTERFACE applications, operates b/w -40 to 85 °C, and has dimensions of L9.0xB9.52xH6.35 mm for surface mount installation.
IT248
Schaffner Holding Ag
The Schaffner Holding Ag IT248 pulse transformer has an isolation voltage of 750V, max pulse rise time of 2200ns, and inductance of 17000uH. Ideal for applications requiring high voltage isolation and fast pulse response in data communication systems.
7490140123B
Wuerth Elektronik & Kg
7490140123B by Wurth Elektronik is a DATACOM TRANSFORMER with 4500V isolation voltage, 350uH inductance, and UL approval. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 85°C and features a compact size of 8.4mm x 14.75mm x 17.1mm for surface mount installation.
78615/16JC-R
Murata Manufacturing's 78615/16JC-R is a pulse transformer with 3700uH inductance, 1000V isolation voltage, and 28 V-us min ET product. It is used for datacom applications due to its surface mounting feature and compact dimensions of L9.52xB9.0xH6.65mm.
1024C
1024C by Murata Manufacturing is a pulse transformer with an isolation voltage of 2000V, inductance of 8800uH, and min ET product of 340V-us. It is used for data communication applications requiring high voltage isolation and precise signal transmission.
H5007NLT
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Application: 1000 BASE-T; Packing Method: TAPE & REEL;
PM-DB2745D
Holt Integrated Circuits
PM-DB2745D by Holt Integrated Circuits is a DATACOM TRANSFORMER with MIL-STD-1553 approval. It has dimensions of L23.62xB16.0xH3.937 mm and operates b/w -55 to 130 °C. Ideal for DATA BUS INTERFACE, it features a turns ratio of 1:2.5 and 1:1.79, making it suitable for through-hole mounting applications.
HX1260FNL
Pulse Electronics' HX1260FNL is a Datacom Transformer with 1500V isolation voltage, 350uH primary inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems, it operates b/w -40°C to 85°C temperatures efficiently.
TGMR-H540V8LF
TGMR-H540V8LF by Halo Electronics is a UL approved pulse transformer with 4500V isolation voltage. Featuring 600uH primary inductance and 25 V-us min ET product, it is ideal for datacom applications. With dimensions of L12.07xB8.64xH8.64 mm, this surface mount transformer operates b/w -40 to 85°C temperature range efficiently.
PT61020EL
Bourns
The Bourns PT61020EL is a DATACOM TRANSFORMER with 4 functions and 1500V isolation voltage. It has primary inductance of 350uH, suitable for LAN, 10/100/1000 BASE-T, and ETHERNET applications. With dimensions of L17.62xB12.2xH6.0 mm, it operates b/w -40 to 85°C temperature range.
749010013
Wurth Elektronik 749010013 is a Datacom Transformer with 2 primary windings, 22 secondary windings, and an isolation voltage of 1500V. It has dimensions of L12.95xBW7.11xH5.23 mm and operates b/w -40 to 85 °C. Ideal for applications requiring high-frequency data transmission in compact spaces.
HX5401NL
HX5401NL by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. Ideal for Ethernet applications, it operates b/w -40°C to 85°C. With dimensions of 28.45mm x 17.27mm x 11.18mm, this surface mount transformer has a turns ratio of 1:1 and is designed for data communication systems.
HX5084FNLT
HX5084FNLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH inductance. It is designed for surface mount applications in data communication systems, offering a compact size of L15.24xB6.41xH4.14 (mm) and operating temperatures ranging from -40 to 85°C.
PM-DB2745S
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Impedance (Primary): 4000 OHMS; Application: DATA BUS INTERFACE; Minimum Operating Frequency: 75 KHz;
1028
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Width: 15.06 mm; No. of Functions: 1;
1024
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Dimensions: 15.06mm X 15.06mm X 15.75mm; Maximum Operating Temperature: 70 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74085
Pico Electronics
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 130 Cel; Length: 11.43 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved