Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn63Pb37); No. of Functions: 1; Dimensions: L12.7XB6.73XH5.97 (mm); JESD-609 Code: e0;
Median Price
$21.175
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$23.860
100+ parts
$18.820
1k+ parts
$18.210
10k+ parts
-
DigiKey
$25.070
$20.501
$18.787
TTI
$18.490
$17.390
$17.020
Arrow
$17.670
$17.320
Ozdisan Elektronik
$22.758
VNN
Vyrian
NAC Semi
$28.480
$26.290
Nova Conductors
Bristol Electronics
NexGen Digital
QIE Inc.
Sunrise Surplus Inc.
Microfarads
Prism Electronics
Flex Direct, LLC
PC Components Company LLC
Extreme Components
South Electronics
EPE Components Inc.
Cyclops Electronics Ltd
Electronics Depot
Benley Electronics
$1.750
Aztec Data Supply Inc.
$2.745
Ampacity Inc.
$14.200
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Continental Prestige Electronics
Eastek
Bastille Electronics
Speed Components Ltd (Excess)
Formix International (Excess)
Pulse & Datacom Transformers 100B-1003X attributes and parameters. Explore more Pulse & Datacom Transformers devices from Inrcore
Application:
Height:
JESD-609 Code:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
100B-1003X Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
For over 70 years, iNRCORE has deployed reliable and intelligent solutions to power the world’s next-generation of systems. We have devoted ourselves to meeting our customers’ most demanding applications, and our products have stood up to the harshest conditions on earth – and beyond. From the frontlines of defense to the frontiers of space exploration, iNRCORE’s power and signal magnetic components are utilized to help save lives, generate powerful connection, and further our knowledge of the cosmos. Our team models itself after our products – Rugged to the Core.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Lite-on Semiconductor
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
LAN8720AI-CP-TR
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
Eic Semiconductor
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
H7028NL
Pulse Electronics
H7028NL by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. It features primary inductance of 120uH, dimensions L13.72xB12.19xH5.71mm, and operates b/w 0-70°C. Ideal for surface mount applications in data communication systems due to its compact size and reliable performance.
ITRF-0249-D101
Schurter Ag
Schurter Ag's ITRF-0249-D101 is a VDE-approved pulse transformer with 3200V isolation voltage, 50ns max pulse rise time, and 1200uH primary inductance. Ideal for datacom applications, it operates b/w -25°C to 100°C temperatures and features dimensions of L18.2xB17.8xH13.0mm for through-hole mounting.
HX6096NL
HX6096NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 1.2dB insertion loss, and primary inductance of 350uH. It is designed for Ethernet applications, operates b/w -40°C to 85°C, and has dimensions of L18.2xB12.2xH6.6mm for surface mount installation in UL approved systems.
TST-9007
Data Device
TST-9007 by Data Device is a DATACOM TRANSFORMER with Impedance of 3000Ω, Isolation Voltage of 100V, and Max Pulse Rise Time of 200ns. Ideal for applications requiring THROUGH HOLE MOUNTED transformers with load resistance of 4Ω and turns ratio options of 1:2.5 or 1:1.79.
M21038/27-07
Pico Electronics
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038/27; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 130 Cel; Width: 8.89 mm;
ALT4532V-201-T001
TDK
TDK's ALT4532V-201-T001 is a DATACOM TRANSFORMER for LAN applications with 200uH inductance. It has AEC-Q200 approval, operates b/w -40 to 105 °C, and features 1CT:1CT turns ratio. Ideal for 10/100/1000 BASE-T networks, it is compact at L4.5xB3.2xH2.9 mm and mounts easily on surfaces.
HX5120NLT
HX5120NLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH primary inductance. It is designed for surface mount applications in data communication systems, offering a compact size of L16.51xB9.14xH2.08 (mm) and operating temperatures ranging from -40 to 85°C.
1017C
Murata Manufacturing
Murata Manufacturing's 1017C is a pulse transformer with 4000V isolation voltage, 800uH primary inductance, and 130 V-us min ET product. It is used for datacom applications due to its through-hole mounting feature and compact dimensions of 15.75mm x 15.06mm x 15.06mm.
SM91514AL-E
Bourns
Bourns SM91514AL-E is a pulse transformer with 300uH primary inductance and 1:1 turns ratio. It offers 4300V isolation voltage, AEC-Q200 approval, and operates b/w -40 to 125°C. Ideal for datacom applications due to its compact size (7.62x6.73x5.72mm) and surface mount feature in TR packing method.
PM-DB2725EX+
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; No. of Functions: 1; Maximum Operating Temperature: 130 Cel; Height: 6.1 mm;
96046322019
Littelfuse
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Packing Method: TRAY; Length: 14 mm; Height: 12.5 mm;
ISRF-0235-D101
ISRF-0235-D101 by Schurter Ag is a pulse transformer with an isolation voltage of 3200V, inductance of 1100uH, and max pulse rise time of 50ns. Ideal for datacom applications, it operates b/w -25°C to 100°C and features surface mounting with dimensions L15.2xB13.0xH11.0mm.
ALT4532M-201-T001
ALT4532M-201-T001 by TDK is a Datacom Transformer with inductance of 200uH, suitable for 10/1000 BASE-T, 100 BASE-TX LAN applications. It operates b/w -40 to 85°C and has dimensions of 4.5mm x 3.2mm x 2.9mm for surface mounting.
Q1553-20
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: Q1553-20; Turns Ratio (Np:Ns): 1:1.41; Isolation Voltage: 100 V; Maximum Operating Temperature: 130 Cel;
78602/8C
Murata Manufacturing's 78602/8C is a pulse transformer with 1000V isolation voltage, 1000uH inductance, and 15 V-us min ET product. Ideal for datacom applications, it features through-hole mounting, measures 6.35mm (H) x 9mm (W) x 9.52mm (L), and has a turns ratio of 1:1:1.
750311564
Wuerth Elektronik & Kg
The Wurth Elektronik 750311564 is a pulse & datacom transformer with 1 function and 2 primary windings. It has an isolation voltage of 1500V, inductance of 9.07uH, and can handle an output current of 3A. This transformer is suitable for applications requiring surface mounting and operates within a temperature range of -40 to 125°C.
TLA-3T107LF
TDK's TLA-3T107LF is a pulse transformer with 4 functions, 130uH primary inductance, and 2000V isolation voltage. Ideal for LAN and 10 BASE-T applications due to its compact size (11.6mm x 6.8mm x 5.9mm) and surface mount feature, operating b/w 0°C to 70°C temperature range.
1000B-5002XNL
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 17.78 mm; Width: 12.45 mm; Dimensions: L17.53XB12.19XH5.72 (mm); Turns Ratio (Np:Ns): 1:1;
1082
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Application: GENERAL PURPOSE; Inductance (Primary): 6100 uH;
HX5008NL
HX5008NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, this transformer operates b/w -40°C to 85°C with a frequency range from 1MHz to 100MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
100B-1003XT
Pulser
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn63Pb37); JESD-609 Code: e0; Height: 5.97 mm; Length: 12.7 mm;
100B-1003XT by Pulse Electronics is a DATACOM TRANSFORMER for 10/100 BASE-TX applications. It features an inductance of 350uH, operates b/w -55 to 125 °C, and has dimensions of L12.7xB6.73xH5.97 mm suitable for surface mount assembly in tape & reel packaging.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN LEAD; Packing Method: TR; Dimensions: L12.7XB6.73XH5.97 (mm); Maximum Operating Temperature: 125 Cel;
100B-1003XNLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); No. of Functions: 1; Packing Method: TR; Dimensions: L12.7XB6.73XH5.97 (mm);
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; No. of Functions: 1; Maximum Operating Temperature: 125 Cel; Width: 6.98 mm;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Height: 5.97 mm; Inductance (Primary): 350 uH; Minimum Operating Temperature: -55 Cel;
100B-1003XNL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Application: 10/100 BASE-T; Minimum Operating Temperature: -55 Cel; Inductance (Primary): 350 uH;
100B-1003XNL by Pulse Electronics is a Datacom Transformer with inductance of 350uH. It is designed for 10/100 BASE-TX applications, operating b/w -55°C to 125°C. This transformer comes in TAPE & REEL packing method and has dimensions of L12.7xB6.73xH5.97 mm, suitable for surface mounting feature.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Width: 6.98 mm; Length: 12.95 mm; Dimensions: L12.7XB6.73XH5.97 (mm);
100B-1003X
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Dimensions: L12.7XB6.73XH5.97 (mm); JESD-609 Code: e0; Packing Method: TAPE & REEL;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN LEAD; Length: 12.7 mm; Width: 6.73 mm; Inductance (Primary): 350 uH;
100B-1001XT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn63Pb37); Maximum Operating Temperature: 125 Cel; Dimensions: L14.81XB11.94XH4.7 (mm); No. of Functions: 1;
100B-1001FX
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Terminal Finish: Tin/Lead (Sn63Pb37); Application: 10/100 BASE-TX; Inductance (Primary): 350 uH;
100B-1001X
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn63Pb37); Height: 5.21 mm; Maximum Operating Temperature: 125 Cel; Dimensions: L14.81XB11.94XH4.7 (mm);
100B-1003FXT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Inductance (Primary): 350 uH; Application: 10/100 BASE-TX; Maximum Operating Temperature: 125 Cel;
100B-1003FXNL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Terminal Finish: MATTE TIN; Width: 6.98 mm; Turns Ratio (Np:Ns): 1:1; 1:1;
100B-1003FNLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Height: 6.22 mm; Length: 12.95 mm;
100B-1003FT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; No. of Functions: 1; Packing Method: TR; Inductance (Primary): 350 uH;
100B-1003NL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Application: 10/100 BASE-TX; Turns Ratio (Np:Ns): 1:1; 1:1; Minimum Operating Temperature: -40 Cel;
100B-1003NLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Packing Method: TR; Inductance (Primary): 350 uH; Turns Ratio (Np:Ns): 1:1; 1:1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved