Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
H5007NL by Pulse Electronics is a 4-function datacom transformer with 1 dB insertion loss and 1500 V isolation voltage. Ideal for 1000 BASE-T applications, it operates b/w 0-70°C with dimensions of L17.53xB12.2xH5.26 mm, featuring a surface mount design and tin/copper terminal finish (Sn/Cu).
Median Price
$7.570
Lifecycle Status
Suppliers In-Stock
64
In-Stock Inventory
1k+
Avnet
1+ parts
$5.415
100+ parts
$4.165
1k+ parts
-
10k+ parts
Sager
$5.500
$5.010
$4.650
Chip1Stop
$5.240
$4.810
$4.460
Mouser Electronics
$8.470
$5.800
DigiKey
$8.930
$7.255
$6.523
Element14
$9.393
$5.888
$5.660
Newark
$9.490
$7.900
$6.480
Farnell
$10.769
$7.636
Arrow
$2.494
$2.419
Verical
$2.136
$2.073
Master Electronics
$4.790
$4.600
$4.580
TTI
$4.860
$4.720
Future Electronics
$8.250
$8.140
DF Sales Co.
$3.000
Nova Conductors
$4.950
TME
$3.250
$3.220
Component Electronics Inc.
$7.690
$5.770
$5.000
Bristol Electronics
$8.550
$4.019
$3.848
Chip Stock
Vyrian
IBS Electronics
$6.387
$6.331
Electro Sonic
$5.450
$5.200
$5.050
Speed Components Ltd
Rebound Electronics
NAC Semi
$16.660
$15.150
Tectiva GmbH
Odintec Ltd.
Prism Electronics
ComSIT Distribution GmbH
ComSIT USA
PC Components Company LLC
SPM Sales
Connector Distribution Corp
Right Parts Inc.
Semi Source
Cogito LLC
Netsource Technology, Inc.
Atlantic Semiconductor
Inventory MP
Elcom Components
Jameco Electronics
LIBRA Elektronik GmbH
Classic Components Corporation
North Shore Components
Zilex Electronics Inc.
Flex Direct, LLC
M&R Communications
EMSNET
LWI Electronics Inc
Semtec, LLC
Contempo Components LLC
Martec Srl
ACDS - Activité Composants Distribution Service
ECAB
Sunrise Surplus Inc.
First Choice Components Inc.
A2Z Electronics, Inc.
Bas Electronics GmbH & Co. KG
Sea View Technologies
Cyclops Electronics Ltd
Corel Iberica Componentes, S.L.
Sensible Micro Corp
Resion
Aztec Data Supply Inc.
$1.992
Benley Electronics
$2.000
Corohmni
$3.076
Semicontronic
$3.320
$3.237
Advanced Electronics
$4.902
$4.657
Netroflash
$4.851
CoreStaff
$7.020
$4.711
$4.645
Continental Prestige Electronics
$7.480
Perfect Parts
Glotronic Ltd.
Metaverse IC Inc.
Authorized Procurement Solutions
S.R.D Solutions
Assy Fe
GreenTree Electronics
ChipstoGo Electronic ltd
Speed Components Ltd (Excess)
Argo Parts USA
Epart123
Futuretech Components
Kepictronics
Cyclops Electronics Ltd (Excess)
Schahn Electronic Components
Computer Components Inc. - USA
Having 4 functions allows this transformer to handle multiple tasks efficiently, making it versatile and cost-effective.
With a high isolation voltage of 1500 V, this transformer ensures excellent electrical safety and reliability in data communication applications.
The low insertion loss of 1 dB ensures minimal signal loss during data transmission, maintaining high quality and integrity of the signals.
Compact dimensions make this transformer suitable for space-constrained applications, providing flexibility in design and installation.
Designed for 1000 BASE-T applications, this transformer is optimized for high-speed Ethernet data transmission, ensuring reliable performance.
With a maximum operating temperature of 70°C, this transformer can operate effectively in various environmental conditions without compromising performance.
The ability to operate at temperatures as low as 0°C ensures reliability and stability in extreme temperature conditions.
Specifically designed as a datacom transformer, this product is tailored to meet the requirements of data communication systems, ensuring optimal performance.
Pulse & Datacom Transformers H5007NL attributes and parameters. Explore more Pulse & Datacom Transformers devices from Pulse Electronics
Additional Features:
Application:
Height:
Insertion Loss:
Isolation Voltage:
JESD-609 Code:
Length:
Mounting Feature:
No. of Functions:
No. of Winding (Primary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Sub-Category:
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
H5007NL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
PIC18F4550-I/PT
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Silicon Standard
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603C104K5RACAUTO
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
Transys Electronics
MMBT2907ALT1G
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SM91501AL-E
Bourns
Bourns SM91501AL-E is a pulse transformer with 2 functions, 150uH inductance, and 4300V isolation voltage. Ideal for battery management systems, it operates b/w -40 to 125°C and has a turns ratio of 1CT:1CT. Measuring 14.81x11.68x5mm, it's AEC-Q200 approved for automotive applications.
H5120NL
Pulse Electronics
H5120NL by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. Measuring L16.51xB9.27xH2.08 (mm), it's ideal for 10/100/1000 BASE-T Ethernet applications, operating b/w 0-70°C. This surface mount transformer has a turns ratio of 1CT:1CT and comes in tube packaging.
M21038/27-07
Inrcore
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038/27E; Minimum Operating Temperature: -55 Cel; Width: 8.89 mm; Application: GENERAL PURPOSE;
78250MVC
C&d Technologies
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 78250; Terminal Finish: Tin (Sn); Maximum Operating Temperature: 85 Cel; Dimensions: 9.52mm X 8.89mm X 6.35mm;
Q4470-B
Coilcraft
Coilcraft's Q4470-B is a DATACOM transformer with 1500V isolation voltage, 400uH inductance, and 27 V-us min ET product. Ideal for RS-232 data interfaces, it operates b/w -40°C to 85°C and comes in tape & reel packing.
749020010A
Wuerth Elektronik & Kg
Wurth Elektronik's 749020010A is a Pulse & Datacom Transformer with UL approval and 1500V isolation voltage. It has 4 functions, 1dB insertion loss, and primary inductance of 350uH. Ideal for LAN applications like 1000 BASE-T, it operates b/w -40 to 85°C with dimensions L17.5xB14.20xH6.50mm for surface mounting.
750311624
Wurth Elektronik 750311624 is a Datacom Transformer with 2 primary windings, 9uH inductance, and 1500V isolation voltage. It operates b/w -40 to 125°C, outputs 15V at max current of 1A. Ideal for surface mount applications requiring high voltage isolation and efficient data transmission.
PM-DB2745L
Holt Integrated Circuits
PM-DB2745L by Holt Integrated Circuits is a pulse and datacom transformer with MIL-STD-1553 approval. It has 1 primary winding and 3 secondary windings, with an impedance of 4000 ohms. This surface mount transformer is commonly used for data bus interface applications.
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038/27; Turns Ratio (Np:Ns): 1CT:1.41CT; Minimum Operating Temperature: -55 Cel; No. of Functions: 1;
H1187NL
H1187NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage. It is designed for Ethernet applications like 10/100 BASE-TX, featuring dimensions of L7.62xB7.0xH6.35 mm and matte tin terminal finish. Operating temperature ranges from 0 to 70°C, suitable for surface mount installation in various electronic devices.
TG110-S050N2LF
Halo Electronics
Halo Electronics' TG110-S050N2LF is a Pulse & Datacom Transformer with 1500V isolation voltage and 0.4uH inductance. Ideal for 10/100 BASE-TX Ethernet applications, it operates b/w 0-70°C and features a compact L12.7xB7.11xH5.08mm surface mount design.
78604/4JC
Murata Manufacturing
Murata Manufacturing's 78604/4JC is a pulse transformer with 1000V isolation voltage, 65uH primary inductance, and 4 V-us min ET product. Ideal for datacom applications, it is a surface mount transformer with dimensions of 6.35mm x 9mm x 12.7mm and a turns ratio of 2:1.
HCTSM100304FL-E
Bourns HCTSM100304FL-E is a DATACOM TRANSFORMER with 400uH inductance, 4200V isolation voltage, and 1:1.333 turns ratio. Ideal for pulse & datacom applications, it operates b/w -40 to 125°C and features surface mounting at dimensions of 10.8mm x 13.5mm x 7.5mm (WxLxH).
100B-1003XNLT
100B-1003XNLT by Pulse Electronics is a DATACOM TRANSFORMER for 10/100 BASE-TX applications. It features an inductance of 350uH, operates b/w -55°C to 125°C, and comes in TAPE & REEL packing. With dimensions of L12.7xB6.73xH5.97 mm, it is designed for SURFACE MOUNT installation.
7490140123B
7490140123B by Wurth Elektronik is a DATACOM TRANSFORMER with 4500V isolation voltage, 350uH inductance, and UL approval. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 85°C and features a compact size of 8.4mm x 14.75mm x 17.1mm for surface mount installation.
HX5008FNLT
HX5008FNLT by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. It has an insertion loss of 3dB, inductance of 325uH, and operates b/w -40°C to 85°C. This transformer is UL approved and designed for surface mount applications in pulse and data communication systems.
Defense Logistics Agency
M21038/27-07 by Defense Logistics Agency is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage. It has dimensions of L12.7xB8.89xH6.35 mm and operates b/w -55°C to 130°C. This through-hole mounted transformer with a turns ratio of 1:1.41 is ideal for datacom applications requiring reliable signal transmission in compact spaces.
LP5018NL
Link-pp Int'l Technology
LP5018NL by Link-pp Int'l Technology is a DATACOM TRANSFORMER with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for 10/100 BASE-TX and ETHERNET applications, it operates b/w 0-70°C with dimensions of L27.81xB12.19xH7.24 mm for surface mount installation.
TG110-E050N5RLTR
TG110-E050N5RLTR by Halo Electronics is a DATACOM TRANSFORMER for 10/100 BASE-TX Ethernet applications. It offers 2 functions with an isolation voltage of 1500V and primary inductance of 350uH. This surface mount transformer operates b/w -40°C to 85°C, measuring L12.7xB7.11xH6.35mm in dimensions.
DA2320-ALC
Coilcraft's DA2320-ALC is a Pulse Transformer with 1500V isolation voltage, 264uH primary inductance, and 24.5 V-us min ET product. Ideal for gate drive applications, it operates b/w -40 to 125 °C with a frequency range of 50 KHz to 2000 KHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RTL8110S-32
Realtek
IP1001
IC Plus
VSC8558XHJ
Microsemi
VSC8658XHJ
DP83865DVH
TI
DP83865DVH by Texas Instruments is an Ethernet transceiver IC with a data rate of 1000 Mbps. It operates at a supply voltage of 1.8V and has a terminal pitch of 0.5mm. This network interface chip is designed for commercial temperature grade applications.
S558-5999-P3-F
Bel Fuse
AR8031
Qualcomm
AR8021
VSC8221XHH
VSC8244XHG
VSC8538XHJ
88E1111
Marvell
H5007NL
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Height: 5.51 mm; Application: 1000 BASE-T;
H5007NLT
H5007NLT by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and operates at frequencies up to 100000KHz. Ideal for applications like 1000BASE-T, this transformer comes in compact dimensions of L17.53xB12.2xH5.26mm for surface mount installation.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Application: 1000 BASE-T; Packing Method: TAPE & REEL;
H5008NL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Width: 13.64 mm; Length: 15.24 mm; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO;
H5008NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, this transformer operates b/w -40°C to +70°C with dimensions of L15.24xB13.64xH5.47mm and a max frequency of 100000KHz.
H5008NLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Application: 1000 BASE-T; Height: 5.47 mm; Isolation Voltage: 1500 V;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Dimensions: L15.24XB13.64XH5.72 (mm); JESD-609 Code: e3;
H5007T
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Winding (Primary): 4; Width: 12.2 mm; No. of Functions: 4; Turns Ratio (Np:Ns): 1:1;
H5007
H5007 by Pulse Electronics is a datacom transformer with 4 functions and 4 primary windings. It has an isolation voltage of 1500V and insertion loss of 1dB. This transformer is used in applications such as 1000BASE-T, with a max operating temperature of 70°C and min operating frequency of 1000kHz.
H5004NLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Turns Ratio (Np:Ns): 1:1; 1:1; 1:1; 1:1; Additional Features: MEETS IEE 802.3; Isolation Voltage: 1500 V; Height: 5.26 mm;
H5004NL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Terminal Finish: Matte Tin (Sn); Width: 12.2 mm; No. of Functions: 4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved