Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik's 7490100110A is a UL-approved transformer with 1500V isolation voltage, 1.1dB insertion loss, and 350uH inductance. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to +85°C and features surface mounting method.
Median Price
$3.220
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.590
100+ parts
-
1k+ parts
10k+ parts
Bürklin Elektronik
$3.000
$2.000
Mouser Electronics
$3.750
$2.150
Newark
$4.050
$3.520
$3.280
Element14
$346.090
$298.730
$277.210
Farnell
$1.150
DigiKey
$2.042
Nova Conductors
$2.470
Bristol Electronics
$3.648
$1.715
$1.642
Flip Electronics
Chip Stock
Vyrian
VNN
Ampacity Inc.
$0.980
Semicontronic
$0.956
$0.951
Argo Parts USA
$2.465
Netroflash
Aztec Data Supply Inc.
$2.740
Advanced Electronics
$3.853
$3.506
$3.159
Authorized Procurement Solutions
Continental Prestige Electronics
$1.210
Kepictronics
Having UL approval ensures that this product meets high safety and quality standards, making it a reliable choice.
With a high isolation voltage, this transformer provides excellent protection against electrical hazards, making it suitable for sensitive applications.
The low insertion loss of this transformer ensures minimal signal degradation, resulting in efficient data transmission.
The high inductance of the primary winding helps in reducing electromagnetic interference, enhancing the overall performance of the transformer.
The TR packing method offers convenience and protection during handling and shipping, ensuring the transformer arrives in optimal condition.
The compact size of this transformer allows for easy installation in space-constrained environments.
Designed specifically for 10/100 BASE-T applications, this transformer ensures seamless connectivity and reliable data transfer.
With a high maximum operating temperature, this transformer can withstand elevated temperatures without compromising performance.
The low minimum operating temperature ensures that this transformer can function effectively in a wide range of environments.
The terminal finish of tin over nickel provides excellent conductivity and corrosion resistance, ensuring long-term reliability of the transformer.
This transformer is specifically designed for data communication applications, ensuring optimal performance in data transmission.
The surface mounting feature facilitates easy and secure installation of the transformer on PCBs.
The 1:1 turns ratio ensures equal voltage transformation between the primary and secondary windings, maintaining signal integrity and efficiency.
Pulse & Datacom Transformers 7490100110A attributes and parameters. Explore more Pulse & Datacom Transformers devices from Wurth Elektronik
Application:
Approvals (V):
Height:
Insertion Loss:
Isolation Voltage:
JESD-609 Code:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Inductance (Primary):
Sub-Category:
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
7490100110A Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
SS14
Jinan Jingheng Electronics
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
U6982-CLD
Coilcraft
Coilcraft U6982-CLD is a pulse transformer with 1500V isolation voltage, 59uH inductance, and 22 V-us min ET product. Ideal for gate drive applications, it operates b/w -40 to 85°C temperatures and has a turns ratio of 1CT:2.1CT.
Q1553-22
Pulse Electronics
Q1553-22 by Pulse Electronics is a pulse transformer with dimensions of 12.7x8.89x6.35 mm, operating b/w -55°C to 130°C. It features a turns ratio of 1CT:1.41CT and is designed for through-hole mounting applications in pulse and datacom systems.
HCTSM100304FL-E
Bourns
Bourns HCTSM100304FL-E is a DATACOM TRANSFORMER with 400uH inductance, 4200V isolation voltage, and 1:1.333 turns ratio. Ideal for pulse & datacom applications, it operates b/w -40 to 125°C and features surface mounting at dimensions of 10.8mm x 13.5mm x 7.5mm (WxLxH).
TG111-E12NYNLF
Halo Electronics
TG111-E12NYNLF by Halo Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and dimensions of L14.22xB7.62xH8.64 (mm). Ideal for AUTOMDIX and Ethernet applications, it operates b/w -40°C to 85°C temperature range and features a turns ratio of 1CT:1CT for surface mount installation.
TG110-RP55N5RL
TG110-RP55N5RL by Halo Electronics is a Pulse & Datacom Transformer with 2 primary and secondary windings. It offers an isolation voltage of 1500V, insertion loss of 1.1dB, and inductance of 350uH. Ideal for applications like 10/100 BASE-TX Ethernet due to its compact dimensions (L12.7xB7.11xH6.35 mm) and surface mount feature, operating b/w temperatures of 0-70°C at frequencies up to 100000 KHz.
8322
Api Technologies
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; No. of Functions: 1; Height: 31.7246 mm; Minimum Operating Temperature: -40 Cel; Width: 18.6944 mm;
PM-DB2791S+
Holt Integrated Circuits
PM-DB2791S+ by Holt Integrated Circuits is a DATACOM TRANSFORMER with MIL-STD-1553 approval. It has a turns ratio of 1:2.5 and operates b/w -55°C to 130°C. Ideal for DATA BUS INTERFACE applications, it is compact at 10.16mm x 4.699mm x 10.16mm for surface mount installation.
100B-1003XT
100B-1003XT by Pulse Electronics is a DATACOM TRANSFORMER for 10/100 BASE-TX applications. It features an inductance of 350uH, operates b/w -55 to 125 °C, and has dimensions of L12.7xB6.73xH5.97 mm suitable for surface mount assembly in tape & reel packaging.
750311591
Wuerth Elektronik & Kg
The Wurth Elektronik 750311591 is a pulse & datacom transformer with an isolation voltage of 1500 V. It has a primary inductance of 8 uH and can handle an output current of 3 A. This surface mount transformer is suitable for applications requiring high voltage isolation and efficient power transfer.
96046123739
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Width: 23.4 mm; Minimum Operating Temperature: -40 Cel; Isolation Voltage: 1500 V; Length: 27.2 mm;
1002C
Murata Power Solutions
PULSE TRANSFORMER; Mounting Feature: PCB MOUNT; Minimum ET Product: 200 V-us; Packing Method: TUBE; Height: 15.75 mm; Maximum Operating Temperature: 70 Cel;
DA2320-ALB
Coilcraft's DA2320-ALB is a pulse transformer with 1500V isolation voltage, 264uH primary inductance, and 24.5 V-us min ET product. Ideal for gate drive applications, this surface-mount transformer operates b/w -40 to 125°C with a compact size of L6.6xB5.0xH5.4 mm.
ST7033QNL
ST7033QNL by Pulse Electronics is a Datacom Transformer with 1:1:1 Turns Ratio, 1500V Isolation Voltage, and 90uH Primary Inductance. It operates b/w 0-70°C and is ideal for surface mount applications in pulse and data communication systems.
749012011
749012011 by Wurth Elektronik is a Pulse & Datacom Transformer with an Isolation Voltage of 1500V, Insertion Loss of 1dB, and Primary Inductance of 350uH. It is designed for applications in 10/100 BASE-T networks, featuring dimensions of 17.1mm x 14.75mm x 8.4mm and a temperature range from 0°C to 70°C.
H1102NLT
H1102NLT by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage. It has dimensions of L12.7xB7.11xH5.99 mm and operates b/w 0-70°C. Ideal for 10/100 BASE-T and AUTOMDIX applications, it features a 1:1 turns ratio and surface mounting feature.
ITRA-0249-D104
Schurter Ag
Schurter Ag's ITRA-0249-D104 is a pulse transformer with 3200V isolation voltage, 50ns max pulse rise time, and 3500uH primary inductance. Ideal for applications requiring high voltage isolation and fast pulse response, such as data communication systems or power supplies.
750311783
Wurth Elektronik 750311783 is a Datacom Transformer with 1500V isolation voltage, 20uH primary inductance, and 2.5A output current. It is used for applications requiring surface mount transformers with dimensions L32.31xB27.03xH13.69mm, operating b/w -40 to 125°C, and supporting input voltages from 19V to 70V.
96046323309
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 12.5 mm; Isolation Voltage: 1500 V; Maximum Operating Temperature: 85 Cel; Turns Ratio (Np:Ns): 1:1;
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Turns Ratio (Np:Ns): 1:2.5; Width: 10.16 mm; Additional Features: HEGHT DIM INCLUDES TERMINAL ALSO;
ESMIT-4180/C
Sumida
Sumida's ESMIT-4180/C is a DATACOM TRANSFORMER with 125uH inductance, AEC-Q200 approval, and -40 to 105°C operating range. Ideal for pulse & datacom applications due to its compact size (3.5x5.2x7.1mm) and surface mount feature for easy installation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HX1198FNL
Pulse
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Turns Ratio (Np:Ns): 1:1CT; 1:1CT; No. of Functions: 1; Width: 9.09 mm;
7490100111A
Wurth Elektronik
7490100111A by Wuerth Elektronik & Kg is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 1500V. It has an insertion loss of 1.1 dB, inductance of 350uH, and operates b/w -40 to 105°C. Primarily used in LAN applications due to its compact dimensions (12.7mm x 8.8mm x 6.35mm) and surface mount feature for easy installation.
749020023A
The Wurth Elektronik 749020023A is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. It has inductance of 350uH, suitable for 10/100/1000 BASE-T applications. With a compact size of 15.1x10x4.25mm and surface mount feature, it operates b/w -40 to +85°C temperature range.
749010012A
749010012A by Wurth Elektronik is a Pulse & Datacom Transformer with 1500V isolation voltage, 350uH inductance, and dimensions of L12.7xB8.8xH6.35 mm. It is used for 10/100 BASE-TX, AUTOMDIX, and LAN applications due to its surface mount feature and 1:1 turns ratio for primary to secondary winding.
749013011A
Wurth Elektronik 749013011A is a Pulse & Datacom Transformer with 1500V isolation voltage, 1.1dB insertion loss, and primary inductance of 350uH. Ideal for applications like 10/100 BASE-TX, AUTOMDIX, and LAN due to its compact dimensions of L12.7xB8.8xH6.35mm and surface mounting feature.
749010012
The Wurth Elektronik 749010012 is a pulse and datacom transformer with UL approval. It has an isolation voltage of 1500 V, insertion loss of 1.1 dB, and primary inductance of 350 uH. This surface mount transformer is suitable for LAN applications such as 10/100 BASE-TX networks.
749020100A
749020100A by Wurth Elektronik is a pulse & datacom transformer with an isolation voltage of 1500V. It has a primary inductance of 350uH and dimensions of L12.7XB8.6XH3.0 (mm). This transformer is suitable for LAN applications, specifically for 10/100/1000 BASE-T networks.
749020111A
Wurth Elektronik's 749020111A is a DATACOM TRANSFORMER with 1:1 Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for applications like 1000 BASE-T Ethernet networks, featuring Tin (Sn) over Copper (Cu) Terminal Finish and Surface mounting Feature.
749020010A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: Tin (Sn) over Copper (Cu); Maximum Operating Temperature: 85 Cel; No. of Functions: 4;
749013021
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749013021; Approvals (V): UL; Terminal Finish: TIN OVER NICKEL; Isolation Voltage: 1500 V;
749020011A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: TIN OVER NICKEL; Dimensions: L17.5XB14.2XH6.0 (mm); JESD-609 Code: e3;
749020010
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749020010; Approvals (V): UL; No. of Functions: 1; Minimum Operating Temperature: 0 Cel;
7490140122B
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Length: 17.1 mm; Application: 10/100 BASE-T; Maximum Operating Temperature: 85 Cel;
7490120110
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: Tin (Sn); Width: 9.27 mm; No. of Functions: 1;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749012011; Terminal Finish: TIN SILVER; Minimum Operating Temperature: 0 Cel; Turns Ratio (Np:Ns): 1:1; 1:1;
7490140123B
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Application: 10/100 BASE-T; No. of Functions: 1; Packing Method: TR, 13 INCH;
749010013
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; CSA; Terminal Finish: TIN COPPER; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH;
7490100161A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 7490100161A; Approvals (V): UL; Terminal Finish: Tin/Copper (Sn/Cu); No. of Functions: 1;
749010310
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH; Maximum Operating Temperature: 85 Cel; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH;
7490220120
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN OVER NICKEL; Maximum Operating Temperature: 105 Cel; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved