Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 7490100143 is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in pulse and data communication systems. Dimensions L12.95xB7.11xH5.33 mm, operating temp -40 to 85°C, terminal finish TIN NICKEL.
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Vyrian
ACDS - Activité Composants Distribution Service
Inventory MP
Bristol Electronics
Aztec Data Supply Inc.
$3.360
Corohmni
$4.560
AZTECH Wire
$11.223
Ampacity Inc.
$455.000
Semicontronic
$834.000
$813.150
$808.980
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Perfect Parts
Cyclops Electronics Ltd (Excess)
High isolation voltage provides safety in datacom applications, reducing the risk of electrical hazards.
The inductance value helps in filtering out noise and ensuring stable operation in pulse and datacom applications.
TR packing method ensures the transformer is securely packed and protected during transportation and handling.
With a high maximum operating temperature, this transformer can handle demanding datacom environments without overheating.
The wide temperature range allows this transformer to operate effectively in various temperature conditions, enhancing its versatility.
TIN NICKEL terminal finish provides corrosion resistance and ensures reliable connections for data transmission.
Specifically designed for datacom applications, this transformer is optimized for performance and compatibility in such environments.
Surface mount design makes it easy to integrate this transformer onto circuit boards, simplifying installation and saving space.
The 1:1 turns ratio allows for a direct transfer of signals without amplification or attenuation, ensuring accurate data transmission.
Pulse & Datacom Transformers 7490100143 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Wurth Elektronik
Additional Features:
Application:
Height:
Isolation Voltage:
JESD-609 Code:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
7490100143 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Transistor & Electronic
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
RC0402FR-071KL
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Q1553-20
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: Q1553-20; Turns Ratio (Np:Ns): 1:1.41; Isolation Voltage: 100 V; Maximum Operating Temperature: 130 Cel;
IT245
Schaffner Holding Ag
IT245 by Schaffner Holding Ag is a UL-approved pulse transformer with 750V isolation voltage, 1200 ns max pulse rise time, and 8000 uH primary inductance. Ideal for applications requiring high-frequency data transmission and precise signal isolation in compact spaces. Dimensions: L17.6xB16.7xH11.3 mm, operating temp -25 to 70 °C, freq range 40 kHz to 500 kHz.
749013011A
Wuerth Elektronik & Kg
Wurth Elektronik 749013011A is a Pulse & Datacom Transformer with 1500V isolation voltage, 1.1dB insertion loss, and primary inductance of 350uH. Ideal for applications like 10/100 BASE-TX, AUTOMDIX, and LAN due to its compact dimensions of L12.7xB8.8xH6.35mm and surface mounting feature.
H1164NL
Pulse Electronics
H1164NL by Pulse Electronics is a Datacom Transformer with 1CT:1CT Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is used in 10/100 BASE-TX applications, operates b/w 0-70°C, and has IEEE approval for quality assurance.
ST7033QNL
ST7033QNL by Pulse Electronics is a Datacom Transformer with 1:1:1 Turns Ratio, 1500V Isolation Voltage, and 90uH Primary Inductance. It operates b/w 0-70°C and is ideal for surface mount applications in pulse and data communication systems.
ISRF-0239-D502
Schurter Ag
ISRF-0239-D502 by Schurter Ag is a pulse transformer with an isolation voltage of 3200V and max pulse rise time of 500ns. With primary inductance of 1600uH, it operates b/w -25°C to 100°C. Ideal for datacom applications, this surface mount transformer has dimensions of L22.7xB22.3xH14.0mm.
HDX8008NL
HDX8008NL by Pulse Electronics is a Datacom Transformer with 4 functions and an isolation voltage of 1500V. It has primary inductance of 120uH, operates b/w -40 to 85°C, and features a turns ratio of 1:1. Ideal for surface mount applications in data communication systems due to its compact size and high isolation capabilities.
ALT4532V-201-T001
TDK
TDK's ALT4532V-201-T001 is a DATACOM TRANSFORMER for LAN applications with 200uH inductance. It has AEC-Q200 approval, operates b/w -40 to 105 °C, and features 1CT:1CT turns ratio. Ideal for 10/100/1000 BASE-T networks, it is compact at L4.5xB3.2xH2.9 mm and mounts easily on surfaces.
HM2101NLT
HM2101NLT by Pulse Electronics is a DATACOM TRANSFORMER with 150uH inductance, 4300V isolation voltage, and AEC-Q200 approval. It is ideal for surface mount applications in data communication and pulse transmission systems.
824-00274
E & E Magnetic Products
E & E Magnetic Products' 824-00274 is a Pulse & Datacom Transformer with Isolation Voltage of 1500V, Inductance (Primary) of 350uH, and Dimensions L25.4xB12.7xH5.97 (mm). Ideal for 10/1000 BASE-T applications, it operates b/w -40°C to +85°C temperature range and features Surface mounting method.
TG110-RPE5N5LF
Halo Electronics
TG110-RPE5N5LF by Halo Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage. Measuring L12.7xB7.11xH6.35 (mm), it operates b/w -40 to 85 °C, ideal for 10/100 BASE-TX Ethernet applications. Features matte tin terminal finish and surface mounting feature.
1080
C&d Technologies
1080 by C&d Technologies is a pulse transformer with an isolation voltage of 2000 V and inductance of 29000 uH. It has dimensions of 15.06mm X 15.06mm X 15.75mm and is suitable for applications requiring high voltage isolation and efficient power transfer.
1621
Newport Components
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1600; Application: BUFFER DRIVE; Turns Ratio (Np:Ns): 1:2; Width: 6.86 mm;
96046323269
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Width: 14 mm; No. of Functions: 2; Minimum Operating Temperature: -40 Cel; Length: 14.5 mm;
96046124009
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): IEC; Length: 14.5 mm; Minimum Operating Temperature: -40 Cel; Height: 13.5 mm;
PA0264NLT
PA0264NLT by Pulse Electronics is a Pulse Transformer with 1500V isolation voltage, 1140uH primary inductance, and 12.7 V-us min ET product. Ideal for GATE DRIVE applications, it operates b/w -40 to 130 °C and comes in L8.6xB6.7xH3.6 mm dimensions for surface mount assembly.
IT242
IT242 by Schaffner Holding Ag is a Pulse Transformer with 2500uH primary inductance, 900ns max pulse rise time, and dimensions of L17.6xB16.7xH11.3 (mm). Ideal for GATE DRIVE applications, it operates b/w -25 to 70 °C with a 1:1:1 turns ratio and through-hole mounting feature.
1000B-5001XNL
1000B-5001XNL by Pulse Electronics is a Datacom Transformer with 4 functions, inductance of 350uH, and dimensions L17.53xB12.19xH5.72 (mm). It is used for 10/100/1000 BASE-T applications, operates b/w -55 to 125 °C, and features surface mounting method.
1000B-5002XT
1000B-5002XT by Pulse Electronics is a Datacom Transformer with 4 functions, inductance of 350uH, and dimensions L17.53xB12.19xH5.72 (mm). It is used for 10/100/1000 BASE-T applications, operates b/w -55 to 125 °C, and has a turns ratio of 1:1; 1:1 for surface mount assembly.
78615/16JC-R
Murata Manufacturing
Murata Manufacturing's 78615/16JC-R is a pulse transformer with 3700uH inductance, 1000V isolation voltage, and 28 V-us min ET product. It is used for datacom applications due to its surface mounting feature and compact dimensions of L9.52xB9.0xH6.65mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7490100111A
Wurth Elektronik
7490100111A by Wuerth Elektronik & Kg is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 1500V. It has an insertion loss of 1.1 dB, inductance of 350uH, and operates b/w -40 to 105°C. Primarily used in LAN applications due to its compact dimensions (12.7mm x 8.8mm x 6.35mm) and surface mount feature for easy installation.
749020023A
The Wurth Elektronik 749020023A is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. It has inductance of 350uH, suitable for 10/100/1000 BASE-T applications. With a compact size of 15.1x10x4.25mm and surface mount feature, it operates b/w -40 to +85°C temperature range.
749010012A
749010012A by Wurth Elektronik is a Pulse & Datacom Transformer with 1500V isolation voltage, 350uH inductance, and dimensions of L12.7xB8.8xH6.35 mm. It is used for 10/100 BASE-TX, AUTOMDIX, and LAN applications due to its surface mount feature and 1:1 turns ratio for primary to secondary winding.
749010012
The Wurth Elektronik 749010012 is a pulse and datacom transformer with UL approval. It has an isolation voltage of 1500 V, insertion loss of 1.1 dB, and primary inductance of 350 uH. This surface mount transformer is suitable for LAN applications such as 10/100 BASE-TX networks.
749020100A
749020100A by Wurth Elektronik is a pulse & datacom transformer with an isolation voltage of 1500V. It has a primary inductance of 350uH and dimensions of L12.7XB8.6XH3.0 (mm). This transformer is suitable for LAN applications, specifically for 10/100/1000 BASE-T networks.
749020111A
Wurth Elektronik's 749020111A is a DATACOM TRANSFORMER with 1:1 Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for applications like 1000 BASE-T Ethernet networks, featuring Tin (Sn) over Copper (Cu) Terminal Finish and Surface mounting Feature.
749020010A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: Tin (Sn) over Copper (Cu); Maximum Operating Temperature: 85 Cel; No. of Functions: 4;
7490100110A
Wurth Elektronik's 7490100110A is a UL-approved transformer with 1500V isolation voltage, 1.1dB insertion loss, and 350uH inductance. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to +85°C and features surface mounting method.
749013021
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749013021; Approvals (V): UL; Terminal Finish: TIN OVER NICKEL; Isolation Voltage: 1500 V;
749020011A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: TIN OVER NICKEL; Dimensions: L17.5XB14.2XH6.0 (mm); JESD-609 Code: e3;
749020010
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749020010; Approvals (V): UL; No. of Functions: 1; Minimum Operating Temperature: 0 Cel;
7490140122B
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Length: 17.1 mm; Application: 10/100 BASE-T; Maximum Operating Temperature: 85 Cel;
7490120110
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: Tin (Sn); Width: 9.27 mm; No. of Functions: 1;
749012011
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749012011; Terminal Finish: TIN SILVER; Minimum Operating Temperature: 0 Cel; Turns Ratio (Np:Ns): 1:1; 1:1;
7490140123B
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Application: 10/100 BASE-T; No. of Functions: 1; Packing Method: TR, 13 INCH;
749010013
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; CSA; Terminal Finish: TIN COPPER; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH;
7490100161A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 7490100161A; Approvals (V): UL; Terminal Finish: Tin/Copper (Sn/Cu); No. of Functions: 1;
749010310
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH; Maximum Operating Temperature: 85 Cel; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH;
7490220120
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN OVER NICKEL; Maximum Operating Temperature: 105 Cel; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved