Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
78602/16C by Murata Manufacturing is a pulse transformer with an isolation voltage of 1000 V. It has a primary inductance of 4000 uH and a min ET product of 28 V-us. This transformer is commonly used in pulse and datacom applications.
Median Price
$2.250
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
$1.280
100+ parts
$1.180
1k+ parts
-
10k+ parts
Chip1Stop
$1.910
Element14
$2.150
$1.860
Mouser Electronics
$2.320
$1.610
$1.510
$1.460
DigiKey
$1.900
$1.712
$1.590
Newark
$2.420
$1.810
$1.700
$1.640
Arrow
$1.142
Nova Conductors
$1.480
VNN
Vyrian
Aranea Global
$1.450
$1.392
Argo Parts USA
Continental Prestige Electronics
AZTECH Wire
$9.540
Corohmni
Aztec Data Supply Inc.
This pulse & datacom transformer is designed with a single function, making it suitable for specific applications and ensuring focused performance.
With a high isolation voltage, this transformer can safely handle and transfer signals without any interference or risk of electrical breakdown, ensuring reliable operation in data communication systems.
The primary inductance of 4000 uH ensures efficient energy transfer and precise signal transmission, enabling excellent pulse performance and reducing data loss.
Packaged in a protective tube, this transformer is conveniently stored and delivered, safeguarding it from potential damage during transportation and handling.
This pulse & datacom transformer exhibits a minimum ET product of 28 V-us, indicating a high speed of signal transfer, improved data integrity, and enhanced overall system performance.
With a compact height of 6.35 mm, this transformer efficiently utilizes space on the PCB, allowing for a more streamlined design and facilitating seamless integration into tight electronic configurations.
The transformer's width of 9 mm contributes to its overall compactness, enabling it to be accommodated in space-constrained applications without compromising on functionality.
Designed specifically as a pulse transformer, this product boasts specialized features and characteristics that ensure optimized pulse shaping, accurate signal transmission, and reliable data communication.
The through-hole mounting feature of this transformer simplifies installation and provides secure attachment on the PCB, allowing for robust mechanical support and efficient heat dissipation.
The transformer's length of 9.52 mm is carefully designed, considering the optimal size for integration, thereby providing ease of placement and alignment during assembly.
This transformer offers a balanced turns ratio of 1:1:1, ensuring equal voltage distribution and accurate signal transformation across all connected circuits, making it an ideal choice for precise pulse applications.
Pulse & Datacom Transformers 78602/16C attributes and parameters. Explore more Pulse & Datacom Transformers devices from Murata Manufacturing
Application:
Minimum ET Product:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
78602/16C Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Crimson Semiconductor
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Sensitron Semiconductor
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
SPC TECHNOLOGY/ MULTICOMP
TG110-E050N5LFTR
Halo Electronics
TG110-E050N5LFTR by Halo Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage, 1CT:1CT turns ratio, and dimensions of L12.7xB7.11xH6.35 mm. Ideal for 10/100 BASE-TX applications, it operates b/w -40 to 85°C and features surface mounting method.
H5008NLT
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Dimensions: L15.24XB13.64XH5.72 (mm); JESD-609 Code: e3;
ISRF-0239-D502
Schurter Ag
ISRF-0239-D502 by Schurter Ag is a pulse transformer with an isolation voltage of 3200V and max pulse rise time of 500ns. With primary inductance of 1600uH, it operates b/w -25°C to 100°C. Ideal for datacom applications, this surface mount transformer has dimensions of L22.7xB22.3xH14.0mm.
Q1553-22
Inrcore
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Height: 6.35 mm; Additional Features: STANDARD: MIL-PRF-21038; No. of Functions: 1;
8464
Api Technologies
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 2; Height: 5.84 mm; Dimensions: L28.57XB16.26XH5.84 (mm); Width: 16.26 mm;
HCTSM100304FL-E
Bourns
Bourns HCTSM100304FL-E is a DATACOM TRANSFORMER with 400uH inductance, 4200V isolation voltage, and 1:1.333 turns ratio. Ideal for pulse & datacom applications, it operates b/w -40 to 125°C and features surface mounting at dimensions of 10.8mm x 13.5mm x 7.5mm (WxLxH).
M21038/27-05
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: M21038/27-05; Height: 6.35 mm; Minimum Operating Temperature: -55 Cel; Dimensions: 12.7mm X 8.89mm X 6.35mm;
LP5018ANL
Link-pp Int'l Technology
LP5018ANL by Link-pp Int'l Technology is a pulse & datacom transformer with 4 functions. It has an isolation voltage of 1500 V and primary inductance of 350 uH. This transformer is commonly used in applications such as 10/100 BASE-TX Ethernet.
100B-1003XT
Pulse Electronics
100B-1003XT by Pulse Electronics is a DATACOM TRANSFORMER for 10/100 BASE-TX applications. It features an inductance of 350uH, operates b/w -55 to 125 °C, and has dimensions of L12.7xB6.73xH5.97 mm suitable for surface mount assembly in tape & reel packaging.
IT364
Schaffner Holding Ag
IT364 by Schaffner Holding Ag is a UL approved Pulse Transformer with 3000V isolation voltage and 1700ns max pulse rise time. With primary inductance of 1500uH, it's ideal for datacom applications requiring high isolation and fast pulse response. Dimensions: L50.0xB50.0xH60.0 (mm), operating temp range -25 to 70 °C, turns ratio 1:1.
TM1062TXHUANL
TM1062TXHUANL by Inrcore is a Datacom Transformer with 4.5uH primary inductance, 0.3ns max pulse rise time, and 1:1 turns ratio. Ideal for applications requiring surface mount transformers with a temperature range of -55 to 125°C, such as data communication systems.
H5020NLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: H5020; Terminal Finish: Matte Tin (Sn); Packing Method: TAPE & REEL; Application: 1000 BASE-T;
HX5008NL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5008; Terminal Finish: Matte Tin (Sn); Length: 15.24 mm; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO;
TG1G-E001NZRL
TG1G-E001NZRL by Halo Electronics is a pulse & datacom transformer with 4 functions. It has an isolation voltage of 1500 V and primary inductance of 350 uH. This transformer is used in applications like 10/100 BASE-TX Ethernet, with a temperature range of -40 to 85 °C.
TG110-RP55N5RL
TG110-RP55N5RL by Halo Electronics is a Pulse & Datacom Transformer with 2 primary and secondary windings. It offers an isolation voltage of 1500V, insertion loss of 1.1dB, and inductance of 350uH. Ideal for applications like 10/100 BASE-TX Ethernet due to its compact dimensions (L12.7xB7.11xH6.35 mm) and surface mount feature, operating b/w temperatures of 0-70°C at frequencies up to 100000 KHz.
IT248
The Schaffner Holding Ag IT248 pulse transformer has an isolation voltage of 750V, max pulse rise time of 2200ns, and inductance of 17000uH. Ideal for applications requiring high voltage isolation and fast pulse response in data communication systems.
SD250-3L
Coilcraft
Coilcraft's SD250-3L is a Pulse Transformer with 3750V Isolation Voltage, 1500uH Primary Inductance, and 375V-us Min ET Product. Ideal for BASE/GATE DRIVE applications, it operates b/w -40 to 85°C temperatures and features Tin/Silver terminal finish.
M21038/27-07
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: M21038/27-07; Height: 6.35 mm; Isolation Voltage: 100 V; Length: 12.7 mm;
96046123729
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Height: 11.9 mm; Packing Method: TRAY; Maximum Operating Temperature: 85 Cel; No. of Functions: 1;
TG1G-E001NYLF
TG1G-E001NYLF by Halo Electronics is a DATACOM TRANSFORMER with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for 10/100 BASE-TX and ETHERNET applications, it operates b/w -40 to 85 °C with surface mount feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
78601/2C
Murata Manufacturing
Murata Manufacturing's 78601/2C is a pulse transformer with 1000V isolation voltage, 500uH primary inductance, and 10 V-us min ET product. Ideal for datacom applications, it features through-hole mounting, measures 6.35mm (H) x 9mm (W) x 9.52mm (L), and has a turns ratio of 1:1.
78602/1JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786J; Terminal Finish: Matte Tin (Sn); Additional Features: CENTER TAPPED SECONDARY; Packing Method: TAPE & REEL;
78602/16JC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Turns Ratio (Np:Ns): 1:1:1; Width: 9 mm; Height: 6.35 mm; Inductance (Primary): 3350 uH;
78602/8C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Isolation Voltage: 1000 V; Application: GENERAL PURPOSE; Packing Method: TUBE; Length: 9.52 mm;
78604/4JC
Murata Manufacturing's 78604/4JC is a pulse transformer with 1000V isolation voltage, 65uH primary inductance, and 4 V-us min ET product. Ideal for datacom applications, it is a surface mount transformer with dimensions of 6.35mm x 9mm x 12.7mm and a turns ratio of 2:1.
78604/4MC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Approvals (V): UL; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: 0 Cel;
78602/2JC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TUBE; Isolation Voltage: 1000 V; Inductance (Primary): 380 uH; Length: 12.7 mm;
78601/16JC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: GENERAL PURPOSE; Width: 9 mm; Minimum ET Product: 28 V-us; Length: 12.7 mm;
78602/16MC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Approvals (V): UL; Terminal Finish: Matte Tin (Sn); Application: GENERAL PURPOSE;
78604/3C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; No. of Functions: 1; Length: 9.52 mm; Width: 9 mm; Isolation Voltage: 1000 V;
78601/9C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Width: 9 mm; Turns Ratio (Np:Ns): 1:1; Minimum ET Product: 56 V-us; Height: 6.35 mm;
78602/16JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 1; Maximum Operating Temperature: 85 Cel; Application: GENERAL PURPOSE; Packing Method: TAPE & REEL;
78602/16M-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Height: 6.35 mm; No. of Functions: 1; Width: 8.89 mm;
78602/16
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 786; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel; No. of Functions: 1;
78602/1
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 786; No. of Functions: 1; Turns Ratio (Np:Ns): 1:1:1; Inductance (Primary): 2000 uH;
78602/16MC-R
78602/1MC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Approvals (V): UL; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 70 Cel;
78602/1MC
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 786; Terminal Finish: Tin/Lead (Sn/Pb); Width: 8.89 mm; Height: 6.35 mm;
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 786; Terminal Finish: Tin/Lead (Sn/Pb); Length: 9.52 mm; Height: 6.35 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved