Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
Median Price
$0.449
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Maritex
1+ parts
$0.653
100+ parts
$0.283
1k+ parts
$0.225
10k+ parts
-
Chip Stock
Digiode
Micros sp.j. W. Kędra i J. Lic
$0.245
Anansix
Nova Conductors
Vyrian
VNN
PUI
LittleDiode
Corohmni
$2.603
One Stop Electronics
$16.100
Metaverse IC Inc.
Kepictronics
Authorized Procurement Solutions
GreenTree Electronics
A-Z Elektronik GmbH
Alle Elektronik GmbH
UNI Independent Distributors
Argo Parts USA
Continental Prestige Electronics
Glotronic Ltd.
Corphita
Aranea Global
Perfect Parts
Assy Fe
Triode For Alternating Current (TRIAC) BT138-600E attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Ween Semiconductors
Additional Features:
Case Connection:
Configuration:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Maximum RMS On-state Current:
Reference Standard:
Repetitive Peak Off-state Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
BT138-600E Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
WeEn Semiconductors Co., Ltd was registered as a company on Aug 5, 2015. WeEn’s global footprint has an operational headquarters in Shanghai and wholly owned subsidiaries and centers in Jilin & Hongkong, north east China (Front-End Fabrication) Shanghai and Manchester, UK (Research & Development) , Dongguan(Warehouse and Distribution), and cities throughout the world (Sales Offices and Customer Service Access). In September 2018, WeEn added its new, in-house, reliability and failure analysis laboratory in Nanchang, Jiangxi Province, China. With a heritage of over 50 years in semiconductor development and manufacturing, WeEn as a key player has focused on developing a wide and deep portfolio of industry-leading power products including Silicon Carbide Power Devices, Silicon Controlled Rectifiers and Triacs, standard and fast recovery Power Diodes , TVS and ESD protection Devices and IGBTs and modules. All these products are widely used in the markets for telecommunications, computers, consumer electronics, intelligent home appliances, lighting, automotive and power management applications. WeEn seeks to help our customers achieve improved cost and production efficiency and contribute to the development of global intelligent manufacturing.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
ULN2803A
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BT137-600D,127
BT137-600D,127 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 8A max RMS on-state current. It has a 5mA max DC gate trigger current and operates at up to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
BT136S-600E
Philips Semiconductors
TRIAC; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; Maximum Leakage Current: .5 mA; Maximum RMS On-state Current: 4 A; Minimum Operating Temperature: -40 Cel;
MAC12SMG
MAC12SMG by Onsemi is a single TRIAC with 3 terminals, featuring a max RMS on-state current of 12A and repetitive peak off-state voltage of 600V. Ideal for applications requiring a trigger device with 4 quadrant logic level TRIAC configuration, operating b/w -40 to 110°C.
Z0103MN0
Ween Semiconductors
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
5961-01-333-2236
5961-01-333-2236 by Texas Instruments is a TRIAC with max. DC gate trigger current of 50mA, max. leakage current of 2mA, and max. operating temp of 110°C. It is used as a trigger device in applications requiring a max RMS on-state current of 16A and repetitive peak off-state voltage of 600V.
DTA10E
DTA10E by Onsemi is a TRIAC with 1.4V max on-state voltage, 30mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -40 °C to 150°C, suitable for applications requiring up to 10A RMS on-state current such as lighting controls and motor speed control.
MAC228A8T
MAC228A8T by Onsemi is a single TRIAC with 600V repetitive peak off-state voltage and 8A max RMS on-state current. It operates b/w -40 to 110 °C, suitable for applications requiring 4 quadrant logic level TRIACs in flange mount packages.
BTA225-600BT,127
BTA225-600BT,127 by NXP Semiconductors is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 150 °C and has a max DC gate trigger current of 50mA. Ideal for applications requiring snubberless TRIACs in various electronic circuits.
Q6030LH5TP
Littelfuse
Q6030LH5TP by Littelfuse is a single TRIAC with 600V repetitive peak off-state voltage and 30A max RMS on-state current. It has a plastic/epoxy package body material, -40 to 125 °C operating temperature range, and is ideal for alternating current applications.
MAC08MT1G
TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
MAC8SMG
MAC8SMG by Onsemi is a 4-quadrant logic level TRIAC with max. RMS on-state current of 8A and DC gate trigger voltage of 1.5V. Ideal for AC applications, it operates b/w -40 to 110°C, featuring a plastic/epoxy package body and through-hole terminal form.
BTA12-600CW3G
BTA12-600CW3G by Onsemi is a single TRIAC with 12A RMS on-state current, 600V repetitive peak off-state voltage, and 35mA max DC gate trigger current. It is used in applications requiring snubberless TRIACs for AC power control at temperatures ranging from -40°C to 125°C.
TIC226M
MAC4DLM-001
MAC4DLM-001 by Onsemi is a single TRIAC with 3 terminals, max. RMS on-state current of 4A, and max. DC gate trigger voltage of 1.3V. It operates b/w -40 to 110 °C and is ideal for applications requiring a 600V repetitive peak off-state voltage such as lighting controls and motor speed control systems.
MAC4DHM-001
MAC4DHM-001 by Onsemi is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It operates b/w -40 to 110 °C, with a 5mA max DC gate trigger current. Ideal for applications requiring precise AC power control in various electronic devices.
Z0103MA1AA2
Z0103MA1AA2 by STMicroelectronics is a 4 QUADRANT LOGIC LEVEL TRIAC with 600V repetitive peak off-state voltage. It has a max on-state current of 1A and DC gate trigger current of 5mA. Ideal for applications requiring precise AC power control in industrial equipment and lighting systems.
BTA16-600BW
BTA16-600BW by STMicroelectronics is a single TRIAC with 3 terminals and a max RMS on-state current of 16A. It features a trigger device type of snubberless TRIAC, with a repetitive peak off-state voltage of 600V. This component is commonly used in applications requiring AC power control, such as dimmer switches and motor speed controls.
Z0103MNT1G
Z0103MNT1G by Onsemi is a 4-terminal TRIAC with max. DC gate trigger current of 3mA and max. RMS on-state current of 1A. Ideal for applications requiring a 600V repetitive peak off-state voltage, such as AC power control in consumer electronics or industrial equipment.
Q6025NH6RP
The Littelfuse Q6025NH6RP is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 125°C, making it suitable for various AC applications. With a max DC gate trigger current of 80mA, this device is ideal for controlling power in electronic circuits.
DTC12G-N
DTC12G-N by Onsemi is a TRIAC with 1.5V max on-state voltage, 30mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -40 °C to 125°C, suitable for applications requiring up to 12A RMS on-state current such as lighting controls and motor speed control.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BT136S-600D,118
BT136S-600D,118 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It has a 1.5V max DC gate trigger voltage and operates b/w -40 to 125 °C. Ideal for AC power control applications due to its GULL WING terminal form and small outline package style.
BT136S-600D,118 by Ween Semiconductors is a TRAIC with a maximum operating temperature of 125°C and a repetitive peak off-state voltage of 600V. It has a maximum RMS on-state current of 4A and features a sensitive gate. This device is commonly used in 4 quadrant logic level TRIAC applications.
BT139-600E,127
BT136-600E,127
BT139-600E/DG,127
NXP Semiconductors' BT139-600E/DG,127 is a TRIAC with 16A RMS on-state current, 600V repetitive peak off-state voltage, and 10mA max DC gate trigger current. It operates b/w -40°C to 150°C and finds applications in AC power control circuits for various electronic devices.
TRIAC; Surface Mount: NO; Maximum Holding Current: 45 mA; Maximum RMS On-state Current: 16 A; JESD-609 Code: e3; Maximum Leakage Current: .5 mA;
BT134-600D,127
BT134-600D,127 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It has a 1.5V max DC gate trigger voltage and operates at up to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BT137-600E,127
BT139B-600,118
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BT139B-600,118 by NXP Semiconductors is a single TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. Ideal for applications requiring 4-quadrant logic level TRIACs, it operates b/w -40 to 125°C with a max DC gate trigger voltage of 1.5V.
BT137S-600E,118
BT137S-600E,118 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 8A max RMS on-state current. It has a 10mA max DC gate trigger current and operates b/w -40 to 125 °C. Ideal for applications requiring precise AC power control in various electronic devices.
BT139B-600E,118
BT139B-600E,118 by NXP Semiconductors is a TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. It has a max DC gate trigger current of 10mA and operates b/w -40 to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
BT136-800E,127
BT136-800E,127 by NXP Semiconductors is a TRIAC with 800V repetitive peak off-state voltage and 4A max RMS on-state current. It has a trigger device type of 4 quadrant logic level TRIAC and can operate at temperatures up to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved