Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TIM3742-25UL is an N-channel RF Power FET with a 15V DS breakdown voltage, ideal for amplifier applications in the C band. Featuring a max drain current of 20A and a power dissipation of 100W, this transistor operates in depletion mode at up to 175°C ambient temperature.
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
1k+ parts
10k+ parts
Ampacity Inc.
$65.050
Argo Parts USA
Aranea Global
Continental Prestige Electronics
The ceramic and metal-sealed co-fired package body material provides excellent thermal conductivity and helps in dissipating heat efficiently during operation, ensuring reliable performance.
The N-channel configuration offers high efficiency and low on-state resistance, making this FET suitable for various RF power applications.
The single configuration simplifies the circuit design and enhances the overall reliability of the RF power transistor.
Designed specifically for use in amplifiers, ensuring optimal amplification of RF signals with minimal distortion.
Being surface mountable, this RF power FET allows for easy and efficient assembly onto printed circuit boards, saving space and simplifying manufacturing processes.
Suitable for applications requiring operation in the C band frequency range, showcasing its versatility and compatibility with a wide range of RF systems.
With a high maximum power dissipation of 100 W in ambient conditions, this FET can handle high power levels, ensuring reliable performance in demanding applications.
RF Power Field Effect Transistors (FET) TIM3742-25UL attributes and parameters. Explore more RF Power Field Effect Transistors (FET) devices from Toshiba
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Field Effect Transistor Technology:
Highest Frequency Band:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation Ambient:
Qualification:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
TIM3742-25UL Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.75
SB
8541.29.00.80
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
1552200168
Molex
WIRE AND CABLE;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Nexperia
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
PD20015STR-E
STMicroelectronics
PD20015STR-E by STMicroelectronics is an N-channel RF power FET designed for amplifier applications. It features a max drain current of 7 A, a breakdown voltage of 40 V, and operates in the ultra-high frequency band. Its compact flange mount design ensures efficient performance in demanding environments.
DE475-501N44A
IXYS Corporation
DE475-501N44A by IXYS is a N-channel RF Power FET with 500V DS breakdown voltage, suitable for switching applications in the VHF band. It features a max drain current of 48A, operates in enhancement mode, and has a package style of small outline.
934065224112
NXP Semiconductors
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; No. of Elements: 2; Package Body Material: CERAMIC, METAL-SEALED COFIRED; Terminal Position: DUAL;
MRF8HP21130HSR3
Freescale Semiconductor
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; No. of Elements: 2; Operating Mode: ENHANCEMENT MODE; JESD-30 Code: R-CDFP-F4;
PTVA101K02EV-V1-R0
Wolfspeed
PTVA101K02EV-V1-R0 by Wolfspeed is an N-CHANNEL RF Power FET with 105V DS Breakdown Voltage, 17dB Power Gain, and L BAND frequency. It is a COMMON SOURCE amplifier suitable for ENHANCEMENT MODE operation in applications requiring high power amplification in the L Band.
MRF137
M/a-com Technology Solutions
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 100 W; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Transistor Element Material: SILICON;
934061559118
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 2; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Body Material: CERAMIC, METAL-SEALED COFIRED;
SD2918
SD2918 by STMicroelectronics is an N-CHANNEL RF Power FET with 125V DS Breakdown Voltage and 6A Drain Current. It operates in the Ultra High Frequency Band, suitable for high-power applications. With a max power dissipation of 175W and operating temperature up to 200 °C, it is ideal for demanding RF power amplification needs.
A5G23H065NT4
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Package Shape: RECTANGULAR; Transistor Element Material: GALLIUM NITRIDE; Maximum Operating Temperature: 150 Cel;
MRF1513NT1
NXP Semiconductors' MRF1513NT1 is an N-CHANNEL RF Power FET with 40V DS Breakdown Voltage, ideal for AMPLIFIER applications in the ULTRA HIGH FREQUENCY BAND. Featuring a SINGLE configuration, it has a 2A Drain Current and 31.2W Power Dissipation in a PLASTIC/EPOXY package with NO LEAD terminals.
A2V07H525-04NR6
RF Power Field-Effect Transistors; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40;
BLF278,112
The NXP Semiconductors BLF278,112 is an N-CHANNEL RF Power FET with 125V DS Breakdown Voltage and 20dB Power Gain. Commonly used in amplifiers for Very High Frequency applications, it features a max power dissipation of 500W and operates at up to 200°C.
PD85006TR-E
STMicroelectronics PD85006TR-E is an N-CHANNEL RF Power FET with 40V DS Breakdown Voltage and 2A Drain Current. Ideal for AMPLIFIER applications in ULTRA HIGH FREQUENCY BAND, it features a 36.5W Power Dissipation, ENHANCEMENT MODE operation, and GULL WING terminals for surface mounting.
DE375-501N21A
DE375-501N21A by IXYS Corp is a plastic/epoxy N-channel RF Power FET with 500V DS breakdown voltage. It operates in the very high-frequency band and has a max drain current of 25A. Ideal for switching applications.
LET20045C
LET20045C by STMicroelectronics is an N-CHANNEL RF Power FET with 80V DS Breakdown Voltage. It operates in Enhancement Mode for AMPLIFIER applications in L BAND frequency range. With 12A Drain Current and 130W Power Dissipation, it's a high-performance transistor suitable for various RF power amplification needs.
PD55008L
PD55008L by STMicroelectronics is an N-CHANNEL RF Power FET with 40V DS Breakdown Voltage, suitable for AMPLIFIER applications. It operates in ENHANCEMENT MODE at ULTRA HIGH FREQUENCY BAND, with 5A max Drain Current and 45W Power Dissipation. Package style is CHIP CARRIER, ideal for SOURCE connection in various electronic devices.
NE5550979A-T1-A
Renesas Electronics
NE5550979A-T1-A by Renesas Electronics is a N-CHANNEL RF Power FET with 3A max drain current and 25W power dissipation. Ideal for high-frequency applications, it operates up to 150°C, making it suitable for various RF power amplification needs in surface-mount configurations.
PD55015STR-E
STMicroelectronics' PD55015STR-E is an N-CHANNEL RF Power FET with 40V DS Breakdown Voltage and 7A Drain Current. Ideal for AMPLIFIER applications in ULTRA HIGH FREQUENCY BAND, it features a PLASTIC/EPOXY package, SINGLE configuration, and operates in ENHANCEMENT MODE.
MRF6V10010NR4
NXP's MRF6V10010NR4 is a single N-channel RF FET with 100V DS breakdown voltage, ideal for amplifier applications in L Band. It features a plastic/epoxy package, operates in enhancement mode at up to 200°C, and has a moisture sensitivity level of 3.
MRF136Y
Motorola
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Terminal Position: DUAL; Operating Mode: ENHANCEMENT MODE; Package Style (Meter): FLANGE MOUNT;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TIM3742-8UL
Toshiba
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: FLAT; Maximum Operating Temperature: 175 Cel; JESD-30 Code: R-CDFM-F2;
TIM3742-4L-341
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Shape: RECTANGULAR; Operating Mode: DEPLETION MODE; No. of Terminals: 2;
TIM3742-16
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; JESD-30 Code: R-CDFM-F2; Terminal Position: DUAL; Minimum DS Breakdown Voltage: 15 V;
TIM3742-30L
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; JESD-30 Code: R-CDFM-F2; Case Connection: SOURCE; Operating Mode: DEPLETION MODE;
TIM3742-45SL-341
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Position: DUAL; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Minimum DS Breakdown Voltage: 15 V;
TIM3742-16UL
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation Ambient: 75 W; Transistor Application: AMPLIFIER; Case Connection: SOURCE;
TIM3742-4SL
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Shape: RECTANGULAR; No. of Elements: 1; Qualification: Not Qualified;
TIM3438-16SL
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Highest Frequency Band: S BAND; Operating Mode: DEPLETION MODE; Package Style (Meter): FLANGE MOUNT;
TIM3742-30SL
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Style (Meter): FLANGE MOUNT; Highest Frequency Band: C BAND; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
TIM3742-16L
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; JESD-30 Code: R-CDFM-F2; Package Body Material: CERAMIC, METAL-SEALED COFIRED;
TIM3742-30SL-341
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation Ambient: 115 W; Package Body Material: CERAMIC, METAL-SEALED COFIRED; Maximum Drain Current (ID): 20 A;
TIM3742-45SL
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Position: DUAL; Transistor Element Material: GALLIUM ARSENIDE; Maximum Power Dissipation Ambient: 125 W;
TIM3742-16SL-341
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Drain Current (ID): 13 A; Transistor Element Material: GALLIUM ARSENIDE; Package Body Material: CERAMIC, METAL-SEALED COFIRED;
TIM3742-4L
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; No. of Elements: 1; Peak Reflow Temperature (C): 240;
TIM3742-12UL
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Transistor Element Material: GALLIUM ARSENIDE; Package Shape: RECTANGULAR; Minimum DS Breakdown Voltage: 15 V;
TIM3742-35SL
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Terminal Form: FLAT;
TIM3438-12UL
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Highest Frequency Band: S BAND; Package Shape: RECTANGULAR; Package Body Material: CERAMIC, METAL-SEALED COFIRED;
TIM3536-60
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: CERAMIC, METAL-SEALED COFIRED; Minimum DS Breakdown Voltage: 15 V; Highest Frequency Band: S BAND;
TIM3742-16SL
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Style (Meter): FLANGE MOUNT; Terminal Position: DUAL; Qualification: Not Qualified;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved