Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 170 W; Maximum Collector Current (IC): 30 A; Transistor Application: POWER CONTROL;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$0.551
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$0.606
Advanced Electronics
$2.295
$2.088
$1.882
Corohmni
$2.514
Component Stockers USA
$99.990
Authorized Procurement Solutions
Insulated Gate Bipolar Transistors (IGBT) GT30J121 attributes and parameters. Explore more Insulated Gate Bipolar Transistors (IGBT) devices from Toshiba
Additional Features:
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Maximum Gate-Emitter Voltage:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Turn Off Time (toff):
Nominal Turn On Time (ton):
GT30J121 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Synsemi
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
FS300R12KE3BOSA1
FS300R12KE3BOSA1 by Infineon is an N-CHANNEL IGBT with 6 elements, max IC of 500A, and toff of 810ns. Ideal for applications requiring high power switching such as industrial motor drives and renewable energy systems due to its max VCE of 1200V and fast ton of 400ns.
APT200GN60J
Advanced Power Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 250 A; Nominal Turn Off Time (toff): 1210 ns; Transistor Element Material: SILICON;
CM200DU-12NFH
Mitsubishi Electric
Mitsubishi Electric's CM200DU-12NFH is a N-CHANNEL IGBT with 2 elements, 7 terminals, and max VCEsat of 2.7V. Ideal for power control applications, it has a max collector current of 200A, operating temp of 150°C, and peak reflow temp of 260°C.
AUIRG4BC30U-S
AUIRG4BC30U-S by Infineon Technologies is an N-CHANNEL IGBT transistor with a max collector-emitter voltage of 600V and a max collector current of 23A. It has a nominal turn-off time of 320ns, making it ideal for power control applications requiring fast switching speeds. The package style is small outline with gull wing terminals, suitable for surface mount configurations in high-power electronics.
STGW80V60DF
STMicroelectronics
STGW80V60DF by STMicroelectronics is an N-CHANNEL IGBT with 469W power dissipation, 600V collector-emitter voltage, and 120A collector current. Ideal for high-power applications requiring efficient switching at up to 175°C operating temperature.
FGA30T65SHD
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 238 W; Maximum Collector Current (IC): 60 A; No. of Terminals: 3;
IKW25N120H3XK
IKW25N120H3XK by Infineon Technologies is an N-CHANNEL IGBT with a max voltage of 1200V and current of 50A. It has a turn-off time of 397ns and turn-on time of 61ns, making it ideal for power control applications. The transistor comes in a rectangular package with through-hole terminals and operates at temperatures up to 175°C.
HGTG18N120BND
HGTG18N120BND by Onsemi is an N-CHANNEL IGBT with 1200V max collector-emitter voltage, suitable for motor control applications. It features a 22ns rise time, 200ns fall time, and 345ns turn off time. The transistor has a max power dissipation of 390W and can handle a collector current of up to 54A.
APT35GT120JU2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 55 A; Additional Features: LOW CONDUCTION LOSS; Case Connection: ISOLATED;
SGS10N60RUFDTU
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 35 W; Maximum Collector Current (IC): 16 A; Nominal Turn Off Time (toff): 284 ns;
FZ400R17KE4HOSA1
FZ400R17KE4HOSA1 by Infineon Technologies is an N-CHANNEL IGBT with a max voltage of 1700V and current of 550A. It has a turn on time of 355ns and turn off time of 930ns, making it ideal for power control applications. The transistor comes in a rectangular package style with built-in diode, suitable for flange mount installations at temperatures up to 150°C.
STGWA40H65DFB2
STGWA40H65DFB2 by STMicroelectronics is an N-CHANNEL IGBT with 650V VCE, 72A IC, and 230W power dissipation. Ideal for power control applications due to its fast turn-off time of 158ns and built-in diode configuration. Operates b/w -55°C to 175°C temperature range in a rectangular package style.
IRGP4650D-EPBF
IRGP4650D-EPBF by Infineon Technologies is an N-CHANNEL IGBT with 42ns rise time, 54ns fall time, and 268W power dissipation. It operates at a max temp of 175°C and has a collector-emitter voltage of 600V. Ideal for high-power applications requiring fast switching capabilities.
IRGB4062DPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 48 A; JESD-609 Code: e3;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 390 W; Maximum Collector Current (IC): 54 A; JESD-30 Code: R-PSFM-T3;
IHW25N120E1XKSA1
IHW25N120E1XKSA1 by Infineon Technologies is an N-CHANNEL IGBT with a max voltage of 1200V and collector current of 50A. It has a turn off time of 1677ns, making it ideal for power control applications. The transistor comes in a rectangular package with through-hole terminals, suitable for flange mount installations.
MIXA60W1200TED
IXYS Corporation
N-CHANNEL; Configuration: BRIDGE, 6 ELEMENTS WITH BUILT-IN DIODE AND THERMISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 290 W; Maximum Collector Current (IC): 85 A; Terminal Form: UNSPECIFIED;
F3L75R12W1H3B27BOMA1
Infineon's F3L75R12W1H3B27BOMA1 IGBT features 1200V max collector-emitter voltage, 45A max collector current, and 385ns nominal turn-off time. Ideal for applications requiring high power switching such as motor drives and renewable energy systems.
IXBH10N170
Littelfuse
IXBH10N170 by Littelfuse is an N-CHANNEL IGBT with VCEsat of 3.8V, IC of 20A, and VCE of 1700V. Ideal for MOTOR CONTROL applications due to its single configuration with built-in diode. Operates b/w -55 to 150 °C with a power dissipation of 140W in a rectangular package style.
APT100GN60B2G
Microsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 625 W; Maximum Collector Current (IC): 229 A; Case Connection: COLLECTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GT30N135SRA,S1E
Toshiba
Insulated Gate Bipolar Transistors;
GT30J121(Q)
GT30J65MRB
GT30N135SRA
GT30J301
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 155 W; Maximum Collector Current (IC): 30 A; Transistor Application: POWER CONTROL;
GT30J341,Q
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 230 W; Maximum Collector Current (IC): 59 A; Maximum Gate-Emitter Voltage: 25 V;
GT30J122(Q)
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Maximum Collector Current (IC): 30 A; Maximum VCEsat: 2.8 V;
GT30J126
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 30 A; Terminal Position: SINGLE; No. of Elements: 1;
GT30J122
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Maximum Collector Current (IC): 30 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
GT30J311
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Collector Current (IC): 30 A; Terminal Form: GULL WING; Additional Features: HIGH SPEED SWITCHING;
GT30J322
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Maximum Collector Current (IC): 30 A; Maximum Fall Time (tf): 400 ns;
GT30J341
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 230 W; Maximum Collector Current (IC): 59 A; Package Body Material: PLASTIC/EPOXY;
GT30J122A(STA1,E,D
GT30J341,STA1E
GT30J324
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 170 W; Maximum Collector Current (IC): 30 A; Package Body Material: PLASTIC/EPOXY;
GT30J110SRA
GT30J101
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 155 W; Maximum Collector Current (IC): 30 A; Nominal Turn On Time (ton): 400 ns;
GT30J110SRA,S1E
GT30J122A
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 120 W; Maximum Collector Current (IC): 30 A; Terminal Form: THROUGH-HOLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved