Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
INVERTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$0.481
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$0.457
1k+ parts
10k+ parts
-
Mouser Electronics
$0.970
$0.632
$0.479
RS (Exports)
$0.464
$0.347
Freelance Electronics
$0.217
Digiode
Nova Conductors
$0.467
NAC Semi
$0.472
Bristol Electronics
$0.637
$0.236
$0.166
ComSIT Distribution GmbH
Anansix
A2Z Electronics, Inc.
Florida Circuit
Inland Empire Components Inc.
Vyrian
Sea View Technologies
Prism Electronics
Mil-Aero Solutions, Inc.
ACDS - Activité Composants Distribution Service
North Shore Components
Sinequanon
Resion
Component Sense
Q Components
Cogito LLC
EMSNET
Semtec, LLC
Ampacity Inc.
$0.394
Semicontronic
$0.384
$0.382
Corphita
$0.433
Corohmni
Argo Parts USA
$0.453
Continental Prestige Electronics
$0.458
Netroflash
$0.444
$0.434
Advanced Electronics
Component Stockers USA
$0.520
$0.490
$0.440
ChromeModa Solutions
$9.338
$7.657
IDEA Electronic Components Group
$26.765
$24.088
DigiPath Technology Company
$50.329
MKK Technologies
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Microchip USA
Parana Technologies
$32.001
Metaverse IC Inc.
Supply Digital
GreenTree Electronics
Speed Components Ltd (Excess)
ChipTracer
Glotronic Ltd.
Assy Fe
Computer Components Inc. - USA
Cyclops Electronics Ltd (Excess)
iodParts Technologies Inc.
Logic Gates CD74ACT14M attributes and parameters. Explore more Logic Gates devices from Thomson Consumer Electronics
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
Maximum I (ol):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Inputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Power Supplies (V):
Maximum Power Supply Current (ICC):
Propagation Delay At Nominal Supply:
Propagation Delay (tpd):
Qualification:
Schmitt Trigger:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
CD74ACT14M Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-468-5788, 5962014685788
NIIN
014685788
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
EU2B-YS3203F
Idec
ROTARY SWITCH;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Pro-an Electronic
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
HEF4093BT
NXP Semiconductors
HEF4093BT by NXP Semiconductors is a CMOS logic gate with 4 functions and 2 inputs. It has a propagation delay of 185 ns and operates at a nominal voltage of 5V. This small outline package is suitable for automotive applications.
MM74HC14M
Fairchild Semiconductor
INVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
SN74LVC2G08DCUT
SN74LVC2G08DCUT by Texas Instruments is a logic gate with 2 functions and inputs, operating at 1.8V to 5.5V supply voltage. It features a propagation delay of 4.7ns, output characteristics in 3-STATE, and can handle up to 0.01mA power supply current. Ideal for automotive applications due to its temperature grade of -40°C to 125°C and small outline package style.
74HC14N
74HC14N by NXP Semiconductors is a CMOS logic gate with 6 functions, 38 ns propagation delay at 5V. It features Schmitt Trigger technology, operates b/w -40 to 125 °C, and is ideal for automotive applications due to its nickel palladium gold finish.
SN74AHC1G04DCKR
SN74AHC1G04DCKR by Texas Instruments is a CMOS logic gate with 8.5 ns propagation delay, suitable for automotive applications. It operates at a supply voltage range of 2-5.5 V and has a load capacitance of 50 pF. This surface-mount device features a small outline package with dual terminals and can handle up to 8 Amps of current.
SN74AHC14PWRG4
SN74AHC14PWRG4 by Texas Instruments is a CMOS logic gate with 6 functions and a propagation delay of 12 ns at 3.3V. It operates in a temperature range from -40 to 125 °C and is suitable for automotive applications due to its Schmitt Trigger technology and small outline package style.
SN74LVC1G17DCKTE4
SN74LVC1G17DCKTE4 by Texas Instruments is a CMOS logic gate with 5.5 ns propagation delay, suitable for automotive applications. It operates at a nominal voltage of 3.3V and has a load capacitance of 50 pF. With Schmitt Trigger technology, it offers fast response times in a small outline package.
SN74LVC14ADT
SN74LVC14ADT by Texas Instruments is a CMOS logic gate with 6 functions, 8 ns propagation delay, and 1.8V nominal voltage. It is ideal for automotive applications due to its Schmitt Trigger feature, small outline package style, and wide operating temperature range (-40 to 125 °C).
NC7S04M5X-L22090
The Onsemi NC7S04M5X-L22090 is a CMOS logic gate with 35ns propagation delay at 3V. It has a load capacitance of 50pF and can handle a max I (ol) of 2.6A. Ideal for applications requiring fast signal processing in compact spaces, such as consumer electronics and IoT devices.
74LVC1G14GW
Nexperia
INVERTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
CD74ACT14M
CD74ACT14M by Texas Instruments is a CMOS logic gate with 6 functions and 14 terminals. It has a propagation delay of 14.5 ns at 5V, making it ideal for high-speed applications. With Schmitt Trigger technology and a MILITARY temperature grade, it ensures reliable performance in harsh environments.
CD4081BE
Rochester Electronics
AND GATE; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
SN74HC132DR
SN74HC132DR by Texas Instruments is a CMOS logic gate with 4 functions and 2 inputs. It has a propagation delay of 31 ns at 5V, making it suitable for industrial applications requiring fast response times. This small outline package with surface mount capability operates within a temperature range of -40 to 85°C.
CD4011BEX
Intersil
CD4011BEX by Intersil is a CMOS Logic Gates IC with 250 ns Propagation Delay, 50 pF Load Capacitance, and 0.42 Amp I (ol). It operates at -40 to 85 °C and has 14 terminals in an IN-LINE package. Ideal for industrial applications requiring reliable logic gate functions.
SN74HC08DR
SN74HC08DR by Texas Instruments is a logic gate with 4 functions and 2 inputs. It has a propagation delay of 25 ns at 5V, making it suitable for industrial applications requiring fast response times. With a small outline package style and surface mount capability, it is ideal for compact electronic designs.
SN74LVC14AD
SN74LVC14AD by Texas Instruments is a CMOS logic gate with 6 functions, 8 ns propagation delay, and Schmitt Trigger technology. It operates at a supply voltage of 1.8V to 3.6V, making it suitable for automotive applications requiring fast signal processing in compact designs. This small outline package with surface mount capability is ideal for high-speed digital circuits in harsh environments.
NC7SZ04P5X-L22057
The Onsemi NC7SZ04P5X-L22057 is a CMOS Logic Gate with 10ns Propagation Delay, suitable for applications requiring fast signal processing. Operating at 1.8V, it has a load capacitance of 50pF and can handle up to 32A max I (ol). With a small outline package style, it is ideal for compact electronic designs.
JM38510/07006BDA
JM38510/07006BDA by Texas Instruments is a MILITARY-grade TTL Logic Gates with 2 functions and 4 inputs. It has a propagation delay of 9 ns at 5V, making it suitable for high-speed applications requiring fast response times. With a flatpack package style and dual terminal position, it is ideal for military electronics where reliability and performance are crucial.
SN74LVC1G14QDCKRQ1
SN74LVC1G14QDCKRQ1 by Texas Instruments is a CMOS logic gate with Schmitt Trigger feature. It operates at a supply voltage range of 1.65V to 5.5V, with a max power supply current of 0.01mA. This automotive-grade component has a propagation delay of 13ns and is ideal for applications requiring high-speed signal processing in compact designs.
NC7WZ07P6X_NL
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CD74HC14E
General Electric Solid State
INVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
CD74HC14E by Texas Instruments is a CMOS logic gate with 6 functions and 41ns propagation delay at 4.5V. It operates in a temperature range of -55 to 125 °C and has a max power supply current of 0.04mA. Ideal for military-grade applications requiring Schmitt trigger functionality in a compact IN-LINE package.
Thomson Consumer Electronics
INVERTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
Harris Semiconductor
Rca Solid State
CD74HC14M
CD74HC14M by Texas Instruments is a CMOS logic gate with 6 functions, 41ns propagation delay at 4.5V. It operates in temperatures from -55 to 125°C, suitable for military-grade applications requiring Schmitt Trigger technology and a small outline package.
CD74HC14M96
CD74HC14M96 by Texas Instruments is a CMOS logic gate with 6 functions, 41ns propagation delay at 4.5V. It operates in temperature range -55 to 125°C and has a peak reflow temp of 260°C. Ideal for military-grade applications requiring Schmitt trigger functionality.
CD74ACT14M96
CD74ACT14M96 by Texas Instruments is a logic gate with 6 functions and 1 input. It has a propagation delay of 14.5 ns and operates at a nominal voltage of 5V. This component is commonly used in military-grade applications due to its temperature grade and moisture sensitivity level.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved