Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TXS0102DCTRE4 by Texas Instruments is a 2-bit interface IC with max supply voltage of 5.5V and min operating temp of -40°C. It has 8 terminals, small outline package style, and is ideal for industrial applications requiring 3-state output characteristics.
Median Price
$0.919
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
$0.423
100+ parts
-
1k+ parts
10k+ parts
Digiode
$1.416
Vyrian
Argo Parts USA
$0.410
Continental Prestige Electronics
$0.415
Ampacity Inc.
$1.270
Semicontronic
$1.238
$1.232
Corphita
$1.341
Parana Technologies
$3.659
$4.165
DigiPath Technology Company
$4.029
$3.706
ChromeModa Solutions
$4.111
$3.371
IDEA Electronic Components Group
$3.700
Advanced Electronics
$6.166
$5.857
Corohmni
$11.034
Robosynatics
Lucentia Tech
$0.518
Durable plastic/epoxy material ensures the product is resilient to external factors and provides long-lasting performance.
Surface mount technology allows for easy installation and efficient use of space on the PCB.
Ability to handle high supply voltage ensures stability and reliability in different operating conditions.
Suitable for applications requiring 2-bit processing and data transmission capabilities.
Versatile power supply options make the product compatible with different voltage requirements.
Wide operating temperature range allows the product to function optimally in various environments.
Quality terminal finish enhances conductivity and ensures reliable connections for efficient performance.
Compact width facilitates space-saving design and integration into tight layouts or smaller devices.
Industrial-grade temperature rating ensures the product's reliability and suitability for demanding applications.
Stable nominal supply voltage ensures consistent performance and efficient power consumption.
Other Function Interface ICs TXS0102DCTRE4 attributes and parameters. Explore more Other Function Interface ICs devices from Texas Instruments
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Nominal Supply Voltage-1:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
TXS0102DCTRE4 Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
AT90CAN128-16AU
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
ERJ3GEY0R00V
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
CY8CMBR3110-SX2I
Infineon Technologies
CY8CMBR3110-SX2I by Infineon is a small outline interface IC with 16 terminals, operating at 1.8-5.5V and industrial temperature range (-40 to 85°C). It features CMOS technology, matte tin finish, and gull wing terminal form. Ideal for applications requiring an interface circuit in compact designs.
ADUM160N0BRZ
Analog Devices
ADUM160N0BRZ by Analog Devices is a 16-terminal IC with 6 functions, operating b/w -40 to 125 °C. It has a supply voltage range of 1.7V to 5.5V and is designed for automotive applications requiring interface circuitry in small outline packages.
TXB0108RGYR
TXB0108RGYR by Texas Instruments is an 8-bit interface IC with a max supply voltage of 3.6V and operating temperature range of -40 to 85°C. It features a 20-terminal chip carrier package suitable for industrial applications, offering 3-STATE output characteristics and low supply current of 0.01mA. Ideal for various function interface requirements in electronic systems.
XISOW7741DFMR
XISOW7741DFMR by Texas Instruments is a 20-terminal IC with 4 functions. It operates b/w -40 to 125 °C and has a supply voltage range of 1.71V to 1.89V, making it ideal for automotive applications requiring interface circuitry in compact spaces.
ISO7710DR
ISO7710DR by Texas Instruments is an 8-terminal interface IC with a supply voltage range of 2.25V to 5.5V, suitable for military-grade applications. It features a small outline package style, dual terminal position, and CMOS technology. With a temperature range from -55°C to 125°C, it is ideal for various function interface requirements in harsh environments.
SI8640BB-B-IS1R
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
XISO1212DBQ
Digital I/P Module;
ISO1640QDWRQ1
Texas Instruments' ISO1640QDWRQ1 is an AEC-Q100 compliant interface IC with 2 functions, suitable for automotive applications. It operates b/w -40 to 125 °C with a supply voltage range of 2.25-5.5 V, featuring a small outline package style and dual terminal position.
ADUM1402ARWZ-RL
ADUM1402ARWZ-RL by Analog Devices is a 16-terminal IC with 4 functions, operating b/w -40 to 105°C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages ranging from 2.7V to 5.5V. Ideal for industrial applications requiring small outline packages with dual terminal positions.
TCA39306DCURQ1
TCA39306DCURQ1 by Texas Instruments is an 8-terminal interface IC with a supply voltage range of 0.85V to 5.5V, suitable for applications requiring a temperature range of -40°C to 125°C. It features a plastic/epoxy package body material, surface mount capability, and nickel palladium gold terminal finish, making it ideal for various function interface requirements.
TXS0102DQMR
TXS0102DQMR by Texas Instruments is a 2-bit interface IC with 3-STATE output. It operates b/w -40 to 85°C, supports supply voltages of 1.65-5.5V, and has a terminal pitch of 0.4mm. Ideal for industrial applications requiring small outline, thin profile packages in surface mount technology.
MAX7301AAX+T
Maxim Integrated
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR;
CY8CMBR3002-SX1I
CY8CMBR3002-SX1I by Infineon is an 8-terminal IC with a supply voltage range of 1.8V to 5.5V, operating from -40°C to 85°C. It features a CMOS technology, GULL WING terminals, and is ideal for industrial applications requiring interface circuitry in compact spaces.
MAX4896ETP+T
MAX4896ETP+T by Analog Devices is a BICMOS interface IC with 1 function. It operates at a supply voltage range of 2.7V to 5.5V and has a max output current of 0.1A. This IC is commonly used in industrial applications requiring an interface circuit for other functions.
ADUM5402CRWZRL
ADUM5402CRWZRL by Analog Devices is a 16-terminal interface IC with supply voltage range of 3V to 5.5V. It operates in industrial temperature range (-40°C to 105°C) and has small outline package style for surface mount applications. Ideal for various other function interface circuits requiring reliable performance in harsh environments.
VNI8200XPTR-32
VNI8200XPTR-32 by STMicroelectronics is a 36-terminal interface IC with a supply voltage range of 10.5V to 36V, suitable for automotive applications. It operates b/w -40°C to 125°C, featuring a small outline package style and gull wing terminal form for surface mount assembly. Ideal for various function interface requirements in automotive electronics due to its compact size and wide supply voltage range.
ISO7231CDW
ISO7231CDW by Texas Instruments is a 16-terminal IC with 3 functions, operating b/w -40 to 125 °C. It has a supply voltage range of 3.3V to 5V and is ideal for automotive applications due to its CMOS technology and nickel palladium gold finish. The small outline package measures 10.3mm x 7.5mm with a seated height of 2.65mm, making it suitable for surface mount designs in various electronic systems.
ISO7721DWV
ISO7721DWV by Texas Instruments is a small outline interface IC with 2 channels. It operates at a temperature range of -55 to 125°C and has a max supply voltage of 5.5V. It is commonly used in military applications due to its CMOS technology and gull wing terminal form.
ADUM1301CRWZ-RL
ADUM1301CRWZ-RL by Analog Devices is a 16-terminal IC with 3 functions. It operates b/w -40 to 105°C, supporting EIA-232, EIA-422, and EIA-485 interfaces. This CMOS technology device in a small outline package is ideal for industrial applications requiring reliable signal interface circuits.
SI8660BA-B-IS1
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TXS0104EPWR
TXS0104EPWR by Texas Instruments is a 4-bit interface IC with a max supply voltage of 3.6V. It is used in industrial applications and has a small outline, thin profile package style.
TXS0104ERGYR
TXS0104ERGYR by Texas Instruments is a 4-bit interface IC with max supply voltage of 3.6V and operating temp range of -40 to 85 °C. It's used in industrial applications, featuring surface mount package style and quad terminal position for versatile integration.
TXS0104EPWRG4
TXS0104EPWRG4 by Texas Instruments is a 4-bit interface IC with max supply voltage of 5.5V and min operating temp of -40°C. It's used in industrial applications for signal interfacing due to its small outline package and 3-state output characteristics.
TXS0104EYZTR
TXS0104EYZTR by Texas Instruments is a 4-bit interface IC with 3-STATE output. It operates b/w -40 to 85°C, with supply voltages of 1.65-5.5V. Ideal for industrial applications requiring thin profile and fine pitch grid array packages.
TXS0104ED
TXS0104ED by Texas Instruments is a 4-bit interface IC with 3-STATE output. It operates b/w -40 to 85°C, with supply voltage ranging from 1.65V to 5.5V. Ideal for industrial applications requiring small outline package and surface mount compatibility.
TXS0104EDR
TXS0104EDR by Texas Instruments is a 4-bit interface IC with max supply voltage of 3.6V and operating temp range of -40 to 85°C. It features 3-STATE output characteristics, suitable for industrial applications requiring small outline package style and dual terminal position.
TXS0104ENMNR
TXS0104ENMNR by Texas Instruments is a 4-bit interface IC with 3-STATE output, operating b/w -40 to 85 °C. It has a supply voltage range of 1.65V to 3.6V and comes in a compact rectangular package suitable for industrial applications requiring fine pitch grid array style mounting.
TXS0104EDG4
TXS0104EDG4 by Texas Instruments is a 4-bit interface IC with max supply voltage of 5.5V and min operating temp of -40°C. It's used in industrial applications for signal interfacing due to its small outline package and 3-state output characteristics.
TXS0102DCUR
TXS0102DCUR by Texas Instruments is a 2-bit interface IC with 3-STATE output. It operates b/w -40 to 85 °C and supports supply voltages of 1.65-5.5 V, making it ideal for industrial applications requiring small outline, thin profile packages.
TXS0108EPWRG4
TXS0108EPWRG4 by Texas Instruments is an 8-bit interface IC with 3-STATE output. It operates b/w -40 to 85 °C, with supply voltage ranging from 1.2V to 3.6V. Ideal for industrial applications, it features a small outline package and dual terminal position.
TXS0108EPWR
TXS0108EPWR by Texas Instruments is an 8-bit interface IC with a supply voltage range of 1.2-3.6V, ideal for industrial applications. It features a small outline package with dual terminals and operates b/w -40 to 85°C. With a low supply current of 0.008mA, it offers 3-state output characteristics for versatile usage in various electronic systems.
TXS0108ERGYR
TXS0108ERGYR by Texas Instruments is an 8-bit interface IC with a supply voltage range of 1.2-3.6V, ideal for industrial applications. It features a 3-state output and operates b/w -40 to 85°C, making it suitable for various electronic devices. This chip carrier package has a compact size of 4.5mm x 3.5mm with a low supply current of 0.008mA.
TXS0104EZXUR
TXS0104EZXUR by Texas Instruments is a 4-bit interface IC with 3-STATE output. It operates b/w -40 to 85°C, with supply voltage ranging from 1.65V to 5.5V. Suitable for industrial applications, it features a grid array package style and very thin profile design.
TXS0102QDCURQ1
TXS0102QDCURQ1 by Texas Instruments is a 2-bit interface IC with 3-STATE output. It operates b/w -40 to 125 °C and supports supply voltage range of 1.65V to 3.6V, making it ideal for automotive applications requiring small form factor and low power consumption.
TXS0102DCURG4
TXS0102DCURG4 by Texas Instruments is a 2-bit interface IC with 3-STATE output. It operates b/w -40 to 85 °C and supports supply voltages of 1.65-5.5 V, making it ideal for industrial applications requiring small outline packaging and low power consumption.
TXS0102DCUTG4
TXS0102DCUTG4 by Texas Instruments is a 2-bit interface IC with 3-STATE output, operating at -40 to 85 °C. It has a supply voltage range of 1.65-5.5 V and comes in a small outline package suitable for industrial applications requiring dual terminal positions.
TXS0102DCTR
TXS0102DCTR by Texas Instruments is a 2-bit interface IC with 3-STATE output. It operates b/w -40 to 85 °C and supports supply voltages of 1.65-5.5 V, making it ideal for industrial applications requiring low-profile, small-outline packages in surface-mount configurations.
TXS0104ERGYRG4
TXS0104ERGYRG4 by Texas Instruments is a 4-bit interface IC with 3-STATE output. It operates b/w -40 to 85 °C, suitable for industrial applications. With a package size of 3.5mm x 3.5mm and terminal pitch of 0.5mm, it's ideal for compact electronic designs.
TXS0108ENMER
TXS0108ENMER by Texas Instruments is an 8-bit interface IC with a supply voltage range of 1.4V to 3.6V and operating temperature from -40°C to 85°C. It features a 3-STATE output characteristic, very thin profile package style, and a grid array package shape. Ideal for industrial applications requiring precise signal interfacing in compact spaces.
TXS0108EZXYR
TXS0108EZXYR by Texas Instruments is an 8-bit interface IC with a supply voltage range of 1.2-3.6V, ideal for industrial applications. It features a 3-state output and operates b/w -40 to 85°C, making it suitable for various electronic devices. This IC comes in a compact grid array package with very thin profile and fine pitch terminals for easy surface mounting.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved