Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ISO7741DWR by Texas Instruments is a 4-channel interface IC with CMOS technology. It operates b/w -55 to 125°C, suitable for military-grade applications. With a supply voltage range of 2.25-5.5V and small outline package style, it's ideal for various function interface designs.
Median Price
$2.111
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$1.911
100+ parts
$1.578
1k+ parts
$0.853
10k+ parts
-
Arrow
$2.257
$1.361
$1.094
Chip1Stop
$2.860
$1.650
$1.450
Mouser Electronics
$3.140
$1.940
$1.810
$1.700
DigiKey
$1.965
Verical
Digiode
$1.815
Nova Conductors
$1.983
Cyclops Electronics Ltd
Chip Stock
Vyrian
Sensible Micro Corp
Diverse Electronics
ComSIT Distribution GmbH
Ampacity Inc.
$1.120
Semicontronic
$1.160
$1.131
$1.125
Corphita
$1.720
Continental Prestige Electronics
$1.980
Argo Parts USA
Corohmni
$2.115
Parana Technologies
$2.155
$2.667
Advanced Electronics
$2.178
$2.070
Modulus Dynamics
$2.201
$2.179
$2.113
DigiPath Technology Company
$2.373
$2.183
ChromeModa Solutions
$2.421
$1.985
IDEA Electronic Components Group
Component Stockers USA
$2.800
$1.020
Microchip USA
$13.850
$13.760
GreenTree Electronics
A-Z Elektronik GmbH
Lixinc
Perfect Parts
S.R.D Solutions
Futuretech Components
Authorized Procurement Solutions
Robosynatics
$2.073
$2.030
Lucentia Tech
iodParts Technologies Inc.
Netroflash
$1.943
$1.884
$1.844
This material provides durability and flexibility, making the product suitable for various applications.
This feature allows for easy installation on circuit boards, saving space and simplifying the manufacturing process.
With a high maximum supply voltage, this product can handle a wide range of power requirements, making it versatile.
The multiple functions offered by this IC make it a cost-effective and space-saving solution for complex applications.
The rectangular shape of the package ensures compatibility with standard PCB layouts, enhancing ease of use.
A higher number of terminals provide more connectivity options, increasing the versatility of the IC.
The small outline package style saves space on the PCB, making it ideal for compact designs.
With a low minimum supply voltage, this IC is energy-efficient and suitable for battery-powered devices.
The high maximum operating temperature range ensures reliable performance in harsh environments.
The low minimum operating temperature allows for use in a wide range of temperature conditions.
This terminal finish provides excellent conductivity and corrosion resistance, ensuring long-term reliability.
The dual terminal position offers flexibility in PCB layout, accommodating different design requirements.
The low seated height of the package saves space in compact designs, enhancing the overall efficiency.
The narrow width of the IC makes it suitable for applications where space is limited, without sacrificing functionality.
The high peak reflow temperature tolerance allows for easy and reliable soldering during the manufacturing process.
The compact length of the IC ensures compatibility with various PCB sizes, allowing for flexible design options.
The military-grade temperature rating indicates high reliability and performance in rugged operating conditions.
The four channels provided by this IC offer increased data processing capabilities, making it a versatile solution for multifunctional applications.
The CMOS technology used in this IC offers low power consumption and high noise immunity, ensuring efficient operation.
The gull wing terminal form provides strong mechanical support and easy soldering, enhancing the product's durability.
The nominal supply voltage ensures stable performance and compatibility with standard power sources.
The tight terminal pitch allows for high-density mounting, making this IC suitable for compact designs.
The MSL level 2 rating indicates good moisture resistance, ensuring reliable performance in humid conditions.
This IC is specifically designed for interface circuit applications, providing efficient and reliable connectivity solutions.
Other Function Interface ICs ISO7741DWR attributes and parameters. Explore more Other Function Interface ICs devices from Texas Instruments
Additional Features:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
ISO7741DWR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - ISO7740/ISO7741/ISO7742 06/Aug/2019 ISO774x 04/Apr/2023
PCN Assembly/Origin - Wafer Fab/Assembly 31/Aug/2023
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
Vishay Telefunken
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Eic Semiconductor
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
Pro-an Electronic
FXMAR2102L8X
Fairchild Semiconductor
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: VQCCN; Package Shape: SQUARE;
SN6505ADBVR
SN6505ADBVR by Texas Instruments is a small outline interface IC with 6 terminals, operating b/w -55 to 125°C. It has a max supply voltage of 5.5V and can handle up to 1.5A output current. Ideal for military-grade applications requiring low profile components in compact spaces.
SI8640AB-B-IS1
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Width: 3.9 mm;
LSF0102DCTR
LSF0102DCTR by Texas Instruments is a small outline, low profile interface IC with 2 bits. It operates b/w -40 to 125°C and has a supply voltage range of 1-5.5V. Ideal for automotive applications due to its nickel/palladium/gold terminal finish and open-drain output characteristics.
ADUM1250ARZ-RL7
Analog Devices
ADUM1250ARZ-RL7 by Analog Devices is an 8-terminal IC with a supply voltage range of 3V to 5.5V, operating from -40°C to 105°C. It features a small outline package and CMOS technology, suitable for industrial applications requiring interface circuitry in compact designs.
MAX13035EETE+T
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
SI8641BB-B-ISR
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
MAX14850ASE+T
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ISO7240MDW
ISO7240MDW by Texas Instruments is a 4-channel digital isolator with CMOS technology. It operates b/w -40 to 125 °C and has a supply voltage range of 3.3V to 5V. Ideal for automotive applications, it comes in a small outline package with surface mount capability.
MAX31911AUI+
Digital I/P Module; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: HTSSOP; Package Shape: RECTANGULAR;
MAX14850ASE+
MAX14850ASE+ by Analog Devices is a BICMOS interface IC with 16 terminals, operating b/w -40 to 125 °C. It has a supply voltage range of 3-5.5 V and is designed for automotive applications requiring small outline packages and surface mount technology.
PCA9517DP,118
NXP Semiconductors
PCA9517DP,118 by NXP Semiconductors is a voltage level translator IC with 8 terminals and supply voltages of 3/3.3V. It operates b/w -40 to 85°C, suitable for industrial applications. The small outline package has a max seated height of 1.1mm, making it ideal for space-constrained designs.
MAX14850AEE+T
MAX14850AEE+T by Analog Devices is a BICMOS interface IC with 16 terminals, operating b/w -40 to 125 °C. It has a supply voltage range of 3-5.5 V and is ideal for automotive applications due to its small outline package and matte tin finish.
ADUM5241ARZ-RL7
ADUM5241ARZ-RL7 by Analog Devices is a small outline interface IC with 8 terminals. It operates in an industrial temperature range of -40 to 105°C and has a max supply voltage of 5.5V. This IC is commonly used for other function interface applications.
TXS0104EPWR
TXS0104EPWR by Texas Instruments is a 4-bit interface IC with a max supply voltage of 3.6V. It is used in industrial applications and has a small outline, thin profile package style.
ADUM2401ARWZ
ADUM2401ARWZ by Analog Devices is a small outline interface IC with 16 terminals, operating b/w -40 to 105°C. It has a supply voltage range of 2.7V to 5.5V and uses CMOS technology. Ideal for industrial applications requiring reliable signal isolation in compact designs.
MAX253ESA
MAX253ESA by Maxim Integrated is an 8-terminal IC with a supply voltage range of 4.5V to 5.5V, operating b/w -40°C to 85°C. It features a small outline package style and Gull Wing terminal form, suitable for industrial applications requiring interface circuitry in compact designs.
ADUM1100ARZ-RL7
ADUM1100ARZ-RL7 by Analog Devices is an 8-terminal IC with a supply voltage range of 3V to 5.5V, operating from -40°C to 105°C. It features a small outline package suitable for industrial applications requiring interface circuitry in compact spaces.
ISOW7840FDWER
ISOW7840FDWER by Texas Instruments is a digital isolator with 4 channels, operating at -40 to 125°C. It features a supply voltage range of 3-5.5V and comes in a small outline package suitable for automotive applications. With surface mount capability and Gull Wing terminals, it offers reliable performance in various electronic systems.
ADUM1200ARZ
ADUM1200ARZ by Analog Devices is a dual-function interface IC with 2 functions, operating voltage range of 2.7V to 5.5V, and industrial temperature grade. It comes in a small outline package with 8 terminals for surface mount applications. Ideal for use in various interface circuit applications requiring reliable signal isolation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
ISO7221ADR
ISO7221ADR by Texas Instruments is an 8-terminal interface IC with dual terminal position, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage range of 3.3V to 5V. This CMOS technology IC has a small outline package style and nickel palladium gold terminal finish.
ISO7221CDR
ISO7221CDR by Texas Instruments is a dual-channel interface IC with CMOS technology. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 2.8V to 5V, it features a small outline package and nickel palladium gold terminal finish.
ISO7741DBQR
ISO7741DBQR by Texas Instruments is a 16-terminal interface IC with 4 functions. It operates b/w -55 to 125 °C and supports a supply voltage range of 2.25-5.5 V. Ideal for military-grade applications, it features CMOS technology and GULL WING terminals in a small outline package.
ISO7762FDBQR
ISO7762FDBQR by Texas Instruments is a 16-terminal IC with 6 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 2.25V to 5.5V and uses CMOS technology. This interface circuit in a small outline package is ideal for military-grade applications requiring high reliability and dual terminal positions.
ISO7240MDWRG4
ISO7240MDWRG4 by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and 3.3V nominal voltage. It is used in automotive applications due to its small outline package style, dual terminal position, and wide operating temperature range from -40°C to 125°C.
ISO7741DBQ
ISO7741DBQ by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -55 to 125°C. It has a supply voltage range of 2.25-5.5V and is ideal for military-grade applications requiring interface circuitry in compact spaces.
ISO7721DWVR
ISO7721DWVR by Texas Instruments is a dual-function interface IC with 2 channels. It operates b/w -55 to 125°C, suitable for military-grade applications. With a compact rectangular package style and surface-mount capability, it offers high reliability in various electronic systems.
ISO7741FDW
ISO7741FDW by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -55 to 125 °C. It features a supply voltage range of 2.25-5.5 V and uses CMOS technology. Ideal for military-grade applications requiring interface circuitry in compact spaces.
ISO7762DBQ
ISO7762DBQ by Texas Instruments is a CMOS interface IC with 6 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and comes in a small outline package suitable for military-grade applications. The device features dual terminals with nickel/palladium/gold finish, making it ideal for various other function interface circuits.
ISO7721DW
ISO7721DW by Texas Instruments is a small outline interface IC with 2 channels. It operates at a temperature range of -55 to 125°C and has a max supply voltage of 5.5V. It is commonly used in military applications due to its MILITARY temperature grade.
ISO7231CDWRG4
ISO7231CDWRG4 by Texas Instruments is a 16-terminal IC with 3 functions, operating at -40 to 125°C. It has a CMOS technology, suitable for automotive applications with a supply voltage range of 3.3V to 5V. The package style is small outline, surface mountable and features nickel palladium gold terminal finish.
ISO7741FDBQ
ISO7741FDBQ by Texas Instruments is a 4-channel interface IC with a supply voltage range of 2.25V to 5.5V. It has a small outline package style and is suitable for military-grade applications.
ISO7742DWR
ISO7742DWR by Texas Instruments is a 4-channel interface IC with CMOS technology. It operates b/w -55 to 125 °C and supports supply voltages from 2.25V to 5.5V. With a small outline package style, it's ideal for military-grade applications requiring high reliability in harsh environments.
ISO7231CDWR
ISO7231CDWR by Texas Instruments is a 16-terminal IC with 3 functions, operating at -40 to 125°C. It has a supply voltage range of 3.3V to 5V and is ideal for automotive applications due to its CMOS technology and nickel palladium gold finish. The small outline package makes it suitable for surface mount designs in various interface circuits.
ISO7241CDWR
ISO7241CDWR by Texas Instruments is a 16-terminal digital isolator with 4 functions. It operates b/w -40 to 125°C, suitable for automotive applications. With CMOS technology and nickel palladium gold finish, it supports a supply voltage range of 3.3V to 5V.
ISO7741FQDWQ1
ISO7741FQDWQ1 by Texas Instruments is a CMOS interface IC with 4 functions, suitable for automotive applications. It operates b/w -40 to 125°C, with supply voltage range of 2.25-5.5V. This small outline IC has 16 terminals and meets AEC-Q100 standards for reliability in harsh environments.
ISO7762DBQR
ISO7762DBQR by Texas Instruments is a 16-terminal IC with 6 functions, operating b/w -55 to 125 °C. It features a supply voltage range of 2.25-5.5 V and uses CMOS technology for military-grade applications requiring interface circuitry in compact spaces.
ISO7231CDW
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved