Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8660BC-B-IS1 by Silicon Labs is a digital isolator with 16 terminals, operating voltage range of 2.375V to 5.5V, and AEC-Q100 screening for automotive applications. It features a small outline package style, CMOS technology, and can operate in temperatures ranging from -40°C to 125°C. Ideal for surface mount applications requiring high reliability and noise immunity.
Median Price
$4.495
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Arrow
1+ parts
$3.126
100+ parts
$1.836
1k+ parts
-
10k+ parts
Chip1Stop
$3.680
Mouser Electronics
$5.310
$3.370
$3.110
$3.020
DigiKey
$5.430
$3.638
$3.191
$3.025
RS (Exports)
$5.939
$5.476
$5.361
Verical
Richardson RFPD
$3.290
Digiode
$2.970
Nova Conductors
$3.533
Component Electronics Inc.
$4.620
$3.460
$3.000
Chip Stock
Vyrian
Ampacity Inc.
$1.560
Semicontronic
$1.521
$1.513
Corphita
$2.813
Advanced Electronics
$3.168
$3.010
Continental Prestige Electronics
$3.462
Netroflash
$3.356
$3.285
Argo Parts USA
Aztec Data Supply Inc.
$3.877
Component Stockers USA
$5.020
$3.620
$2.860
Corohmni
$7.774
Lixinc
S.R.D Solutions
Futuretech Components
Perfect Parts
PLASTIC/EPOXY material is durable and lightweight, making the product easy to handle and transport.
Being surface mountable allows for easier and more efficient assembly on PCBs.
Ability to handle a high supply voltage offers flexibility in various applications.
AEC-Q100 certification ensures high reliability and quality suitable for automotive applications.
Rectangular shape enables efficient use of PCB space and easy integration into designs.
Having 16 terminals allows for more connectivity options and versatility in circuit designs.
Small outline package style saves space and enhances the product's portability.
Can operate at a low supply voltage, making it suitable for power-sensitive applications.
High operating temperature range ensures the product can perform reliably in various environmental conditions.
Wide temperature range allows for usage in both extreme cold and hot environments.
Dual terminal position enhances connectivity options and makes installation easier.
Low seated height contributes to compact design and space-saving benefits.
Narrow width facilitates saving space on the PCB and enables denser layout designs.
Optimal length for fitting into various electronic devices without occupying excessive space.
CMOS technology provides low power consumption and high noise immunity, enhancing overall performance.
Gull wing terminal form is suitable for surface mounting, improving the product's assembly capabilities.
Nominal supply voltage of 5V is commonly used in many applications, ensuring compatibility.
With a small terminal pitch, the product allows for high-density mounting, useful in compact devices.
Digital isolator interface IC type ensures electrical isolation for enhanced safety and protection in circuits.
Other Function Interface ICs SI8660BC-B-IS1 attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI8660BC-B-IS1 Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Si86xx/Si84xx 10/Dec/2019
PCN Assembly/Origin - Si82xx/Si84xx/Si86xx 04/Feb/2020
PCN Other - Skyworks Acquisition 9/Jul/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
Sensitron Semiconductor
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
ISO7742FDW
ISO7742FDW by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and uses CMOS technology. Ideal for military-grade applications requiring interface circuitry in compact spaces.
MAX7301AAX-T
Maxim Integrated
MAX7301AAX-T by Maxim Integrated is a 36-terminal IC with supply voltage range of 2.5V to 5.5V, operating from -40°C to 125°C. It features GULL WING terminals and CMOS technology, suitable for automotive applications requiring small outline package with shrink pitch style.
ADUM1400ARWZ
Analog Devices
ADUM1400ARWZ by Analog Devices is a 16-terminal IC with 4 functions, operating b/w -40 to 105°C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages ranging from 2.7V to 5.5V. Ideal for industrial applications requiring small outline packaging and CMOS technology.
LTC6820HMS#3ZZTRPBF
LTC6820HMS#3ZZTRPBF by Analog Devices is a small outline, thin profile interface IC with 16 terminals. It operates at a supply voltage range of 2.7V to 5.5V and has an automotive temperature grade of -40°C to 125°C. This IC is suitable for various applications requiring an interface circuit in the automotive industry.
ISOW7843FDWE
ISOW7843FDWE by Texas Instruments is a digital isolator with 4 channels, operating at -40 to 125°C. It features a supply voltage range of 3-5.5V and comes in a small outline package suitable for automotive applications. With CMOS technology and nickel palladium gold finish, it offers reliable isolation for various interface functions.
CY8CMBR3002-SX1I
Infineon Technologies
CY8CMBR3002-SX1I by Infineon is an 8-terminal IC with a supply voltage range of 1.8V to 5.5V, operating from -40°C to 85°C. It features a CMOS technology, GULL WING terminals, and is ideal for industrial applications requiring interface circuitry in compact spaces.
ISO7720DWV
ISO7720DWV by Texas Instruments is a dual-function interface IC with 2 channels. It operates b/w -55 to 125 °C and has a supply voltage range of 2.25-5.5 V, making it suitable for military-grade applications requiring high reliability in harsh environments. The package style is small outline with gull wing terminals, ideal for surface mount assembly in compact electronic devices.
ADUM3201ARZ-RL7
ADUM3201ARZ-RL7 by Analog Devices is a dual-function interface IC with 8 terminals, operating b/w -40 to 105°C. It has a supply voltage range of 3-5.5V and uses CMOS technology. Ideal for industrial applications requiring small outline packages and surface mount compatibility.
TXS0102DCTR
TXS0102DCTR by Texas Instruments is a 2-bit interface IC with 3-STATE output. It operates b/w -40 to 85 °C and supports supply voltages of 1.65-5.5 V, making it ideal for industrial applications requiring low-profile, small-outline packages in surface-mount configurations.
PM8532B-F3EI
Microsemi
INTERFACE CIRCUIT; Temperature Grade: OTHER; Terminal Form: UNSPECIFIED; Package Shape: SQUARE; JESD-30 Code: S-XXSS-X; Package Body Material: UNSPECIFIED;
TXS0102DCUTG4
TXS0102DCUTG4 by Texas Instruments is a 2-bit interface IC with 3-STATE output, operating at -40 to 85 °C. It has a supply voltage range of 1.65-5.5 V and comes in a small outline package suitable for industrial applications requiring dual terminal positions.
ADUM3160WBRWZ
ADUM3160WBRWZ by Analog Devices is a digital isolator with 16 terminals, operating voltage range of 3-5.5V, and industrial temperature grade. It features CMOS technology, Gull Wing terminal form, and AEC-Q100 screening level. Ideal for applications requiring high reliability in harsh environments like automotive electronics.
SI8645BA-B-IUR
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
SI8641AB-B-IS
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G16;
ADUM5401CRWZRL
ADUM5401CRWZRL by Analog Devices is a small outline interface IC with 16 terminals. It operates b/w -40 to 105°C, suitable for industrial applications. With a supply voltage range of 3-5.5V, it features dual terminal position and matte tin finish for robust performance in various electronic systems.
ADUM1201CRZ-RL7
ADUM1201CRZ-RL7 by Analog Devices is a dual-function interface IC with a supply voltage range of 2.7V to 5.5V, suitable for industrial applications. It comes in a small outline package with 8 terminals and operates b/w -40°C to 105°C. The technology used is CMOS, making it ideal for various interface circuit requirements.
ISO7762FDBQ
ISO7762FDBQ by Texas Instruments is a 16-terminal IC with 6 functions, operating b/w -55 to 125°C. It has a supply voltage range of 2.25-5.5V and uses CMOS technology. This interface circuit in a small outline package is ideal for military-grade applications requiring high reliability and dual terminal positions.
ISO7721DW
ISO7721DW by Texas Instruments is a small outline interface IC with 2 channels. It operates at a temperature range of -55 to 125°C and has a max supply voltage of 5.5V. It is commonly used in military applications due to its MILITARY temperature grade.
ISO7221MDR
ISO7221MDR by Texas Instruments is a dual-channel interface IC with CMOS technology. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 3.3V to 5V and small outline package style, it offers reliable performance in various electronic systems.
ISO7721DR
ISO7721DR by Texas Instruments is a dual-function interface IC with 2 channels. It operates b/w -55 to 125 °C and supports supply voltages from 2.25V to 5.5V. With a small outline package style, it's ideal for military-grade applications requiring reliable signal isolation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8641BB-B-IS1R
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
Silicon Labs
SI8641BB-B-IS1R by Silicon Labs is a 16-terminal digital isolator with 4 functions. It operates b/w -40 to 125°C, with supply voltage ranging from 2.375V to 5.5V. Ideal for applications requiring small outline packages and surface mount technology.
SI8641BB-B-IS1
SI8641BB-B-IS1 by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for surface mount applications in various electronic devices.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
SI8642ED-B-IS
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
SI8621BB-B-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP8,.25;
SI8621BB-B-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
SI8621AB-B-ISR
SI8621AB-B-ISR by Silicon Labs is a digital isolator with 8 terminals, operating voltage range of 2.5V to 5.5V, and AEC-Q100 screening for automotive applications. It features CMOS technology, GULL WING terminal form, and small outline package style suitable for surface mount assembly in various electronic systems. With an extended temperature range from -40°C to 125°C, it offers reliable isolation in harsh environments.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 2.5 V;
SI8620BB-B-ISR
SI8641BD-B-ISR
SI8641BD-B-ISR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and dual terminal position. It is used in applications requiring small outline package style, CMOS technology, and temperature range from -40°C to 125°C.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 4;
SI8631BD-B-IS
SI8631BD-B-IS by Silicon Labs is a 16-terminal digital isolator with 2.5-5.5V supply voltage range, AEC-Q100 screening for automotive applications, and -40 to 125°C operating temperature. It features a small outline package style, CMOS technology, and gull wing terminal form suitable for various interface applications.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
SI8641BA-B-IUR
SI8641BA-B-IUR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for various applications requiring interface isolation and signal transmission in electronic systems.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
SI8641BA-B-IU
SI8641BA-B-IU by Silicon Labs is a digital isolator with 4 functions, operating at -40 to 125 °C. It has a supply voltage range of 2.375V to 5.5V and comes in a small outline package suitable for surface mount applications. Ideal for systems requiring high-speed signal isolation in compact spaces.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Package Equivalence Code: SSOP16,.25;
SI8661BB-B-IS1
Silicon Labs SI8661BB-B-IS1 is a 16-terminal digital isolator with 2.375V to 5.5V supply range, AEC-Q100 screening for automotive applications, and -40°C to 125°C operating temperature. It features CMOS technology, GULL WING terminals, and small outline package ideal for various function interface ICs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved