Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DRV8323RHRGZT by Texas Instruments is a Motion Control IC with 48 terminals, operating voltage range of 6-60V. Ideal for automotive applications, it offers a max output current of 1A and operates in temperatures from -40 to 125°C.
Median Price
$5.435
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$4.282
100+ parts
$3.752
1k+ parts
$2.120
10k+ parts
-
DigiKey
$5.160
$3.293
$2.987
$2.872
Mouser Electronics
$5.710
$3.660
$3.100
Farnell
$6.416
$4.290
$3.739
Element14
$7.470
$5.170
$5.070
Chip1Stop
$2.550
Nova Conductors
$3.730
Digiode
$4.068
Vyrian
Parana Technologies
$1.715
$2.304
ChromeModa Solutions
$1.927
$1.580
IDEA Electronic Components Group
$1.734
Ampacity Inc.
$2.170
Semicontronic
$2.116
$2.105
Corohmni
$3.392
Advanced Electronics
$3.494
$3.319
Bastille Electronics
$3.544
$3.366
$3.320
Argo Parts USA
Corphita
$3.854
Continental Prestige Electronics
$5.280
$3.530
Lixinc
DigiPath Technology Company
$1.737
A-Z Elektronik GmbH
PLASTIC/EPOXY - This material provides durability and protection for the IC, making it a good choice for long-term use.
YES - Enables easy and efficient installation onto circuit boards, saving time and effort in production processes.
SQUARE - The square shape allows for efficient use of space on the circuit board, making it a good choice for compact designs.
24 V - The 24V supply voltage is suitable for a wide range of applications, making this IC versatile and adaptable.
48 - The high number of terminals allows for complex connections and functionality, making this IC suitable for advanced applications.
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE - This versatile package style offers multiple mounting options and efficient heat dissipation, making it suitable for various applications.
125 °C - With a high operating temperature range, this IC can withstand harsh environments and extended use without overheating.
40 °C - The wide temperature range ensures reliable operation even in extreme cold conditions, making this IC suitable for diverse environments.
Nickel/Palladium/Gold (Ni/Pd/Au) - This terminal finish provides excellent conductivity and corrosion resistance, ensuring the longevity and reliability of the IC.
QUAD - The quad terminal position allows for easy and secure connections, enhancing the overall performance and reliability of the IC.
1 mm - The low seated height makes this IC suitable for compact designs where space is limited, without sacrificing performance.
7 mm - The compact width of 7mm allows for easy integration into various systems, making this IC a versatile choice for different applications.
BRUSHLESS DC MOTOR CONTROLLER - The IC is specifically designed for controlling brushless DC motors, offering precise and efficient motor control capabilities.
6 V - With a low minimum supply voltage, this IC is suitable for applications where power efficiency is crucial and can operate even with limited power sources.
30 - The IC can withstand peak reflow temperatures for up to 30 seconds, ensuring reliable soldering and assembly processes.
260 - The high peak reflow temperature allows for efficient soldering and assembly of the IC, ensuring secure connections and reliable performance.
7 mm - The compact length of 7mm makes this IC suitable for space-constrained designs while still maintaining high performance.
AUTOMOTIVE - Designed to meet automotive standards, this IC is suitable for use in automotive applications where reliability and durability are essential.
1 A - With a maximum output current of 1A, this IC can effectively drive motors and other components, making it a versatile choice for various applications.
NO LEAD - The no-lead terminal form simplifies installation and connection processes, improving the overall efficiency and reliability of the IC.
0.5 mm - With a narrow terminal pitch of 0.5mm, this IC is suitable for high-density applications where space is limited, without compromising performance.
2 - The MSL 2 rating indicates that the IC can withstand moderate exposure to moisture during storage and assembly processes, ensuring its reliability.
60 V - With a high maximum supply voltage, this IC can operate with a wide range of power sources, making it suitable for diverse applications.
Motion Control ICs DRV8323RHRGZT attributes and parameters. Explore more Motion Control ICs devices from Texas Instruments
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
DRV8323RHRGZT Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - DRV832YY 19/Jan/2018
PCN Assembly/Origin - Mult Dev Assembly Mat Chg 26/Apr/2019
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
1N4148WT
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Kec
Micro Commercial Components
LV8413GP-H
LV8413GP-H by Onsemi is a Motion Control IC in a square chip carrier package. Operates at -30 to 85°C with power supplies of 3.3V and 5V. Features BICMOS technology, suitable for applications requiring precise motion control in compact designs.
PDRV8908QPWPRQ1
PDRV8908QPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals, operating at -40 to 125°C. It features a supply voltage range of 3-5.5V and max current of 5mA, suitable for automotive applications as a Brush DC Motor Controller. The compact rectangular package with gull wing terminals makes it ideal for space-constrained designs.
DRV8834RGER
DRV8834RGER by Texas Instruments is a Motion Control IC with 2.2A max output current, operating at -40 to 85°C. Suitable for brush DC motor control applications, it features a package style of CHIP CARRIER and very thin profile, with terminal finish of Ni/Pd/Au.
L6234PD
STMicroelectronics
STMicroelectronics L6234PD is a Motion Control IC with 20 terminals, operating voltage of 7-42V, and max output current of 5A. Ideal for automotive applications due to its BICMOS technology, it's a Brushless DC Motor Controller in small outline package suitable for surface mount assembly.
PDRV8452DDWR
PDRV8452DDWR by Texas Instruments is a Motion Control IC with 44 terminals, operating voltage range of 4.5V to 48V, and max output current of 5A. It is designed for stepper motor control applications, featuring a small outline package and dual terminal position suitable for various motion control systems. With a wide temperature range from -40°C to 125°C, it offers reliable performance in diverse environments.
UC3625DWTR
Unitrode
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Supply Voltage (Vsup): 10 V;
SLA7076MPRT
Allegro MicroSystems
Allegro MicroSystems' SLA7076MPRT is a Motion Control IC with 23 terminals, operating b/w -20 to 85°C. It supports supply voltages of 3-5.5V and output currents up to 1.5A, making it ideal for stepper motor control applications requiring precise motion at varying speeds and loads.
L9942XP1TR
L9942XP1TR by STMicroelectronics is a Motion Control IC with 24 terminals and a supply voltage range of 3-5.3V. It features a max output current of 2.5A, suitable for stepper motor control applications. The package style is small outline with gull wing terminals, making it ideal for compact designs requiring precise motion control.
STK541UC62K-E
STK541UC62K-E by Onsemi is a Motion Control IC with 19 terminals, operating voltage range of 0-450V. It offers max output current of 20A and is ideal for AC motor control applications due to its flange mount package style.
FNA23512A
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 34; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Nominal Supply Voltage (Vsup): 15 V;
LB1830MC-AH
LB1830MC-AH by Onsemi is a Motion Control IC with 10 terminals, operating voltage of 3-9V. It features a max output current of 0.5A and operates b/w -20 to 80°C. Ideal for brush DC motor control applications due to its small outline package and bipolar technology.
MCP8024-H/PT
Microchip Technology
MCP8024-H/PT by Microchip is a Motion Control IC with 48 terminals, operating from -40 to 150 °C. It's a Brushless DC Motor Controller for automotive applications, supporting supply voltage range of 6-28 V and low current consumption of 0.5 mA.
FNB41560
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Qualification: Not Qualified;
L6230QTR
STMicroelectronics' L6230QTR is a Motion Control IC with 32 terminals, suitable for automotive applications. It operates b/w -40 to 150°C, supporting supply voltages from 8V to 52V. This BCDMOS technology chip carrier offers precise control for brushless DC motor controllers.
TLE94103EPXUMA1
Infineon Technologies
BRUSHLESS DC MOTOR CONTROLLER; Moisture Sensitivity Level (MSL): 2A;
DRV8245PQPWPRQ1
DRV8245PQPWPRQ1 by Texas Instruments is a Motion Control IC with 28 terminals and a max output current of 32A. It operates b/w -40 to 125°C, suitable for automotive applications due to AEC-Q100 screening level. The IC features BICMOS technology, GULL WING terminal form, and supports supply voltage range from 4.5V to 35V.
LM629N-6/NOPB
National Semiconductor
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MAX22201ATC+T
Analog Devices
BRUSH DC MOTOR CONTROLLER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
TMC2300-LA-T
Analog Devices' TMC2300-LA-T is a Motion Control IC with 30 terminals, operating voltage range of 2-11V, and output current up to 1.7A. Ideal for stepper motor control applications due to its compact square package shape and low profile design. Operating temperature from -40°C to 125°C makes it suitable for various industrial environments.
IRMCF371TR
International Rectifier
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8301DCA
Texas Instruments' DRV8301DCA is a Motion Control IC with 56 terminals, operating at -40 to 125 °C. It supports supply voltages from 6V to 60V and offers a max output current of 1.7A. Ideal for automotive applications, this IC features a small outline package with gull wing terminals and nickel palladium gold finish.
DRV8701PRGER
DRV8701PRGER by Texas Instruments is a Motion Control IC with 24 terminals in a square package. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 5.9-45V and peak current of 9.5mA, it's ideal for stepper motor control systems.
DRV8871DDARQ1
DRV8871DDARQ1 by Texas Instruments is a Motion Control IC with 8 terminals and a supply voltage range of 6.8V to 45V. It operates in automotive-grade temperatures from -40°C to 125°C, making it suitable for brush DC motor control applications. With a max output current of 3.5A, this IC is designed for compact designs requiring high performance in harsh environments.
DRV8825PWP
DRV8825PWP by Texas Instruments is a motion control IC with 2.5A output current and 24V nominal voltage. Ideal for brush DC motor control, it operates in industrial temperature range (-40 to 85°C) and features small outline package style.
DRV8801AQRMJRQ1
DRV8801AQRMJRQ1 by Texas Instruments is a Motion Control IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 125°C, suitable for automotive applications. This DMOS technology controller has a max output current of 2.8A, making it ideal for brush DC motor control in compact designs.
DRV8412DDWR
DRV8412DDWR by Texas Instruments is a Motion Control IC with 2 functions, operating at a supply voltage range of 12-50V. This IC is ideal for Stepper Motor Controllers, featuring a max output current of 15A and terminal finish of Ni/Pd/Au. With a compact package style and industrial temperature grade, it offers precise control in various applications.
DRV8711DCP
DRV8711DCP by Texas Instruments is a motion control IC with a nominal voltage of 24V. It is a stepper motor controller with a max operating temperature of 85°C, making it suitable for industrial applications. Its compact size and surface mount capability make it easy to integrate into various systems.
DRV8301DCAR
Texas Instruments' DRV8301DCAR is a Motion Control IC with 56 terminals and a supply voltage range of 6-60V. Ideal for automotive applications, it offers a max output current of 1.7A, operating temperatures from -40 to 125°C, and surface-mount compatibility in a small outline package.
DRV8833CPWPR
DRV8833CPWPR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 2.7V to 10.8V, and max output current of 1A. Ideal for brush DC motor control applications in industrial settings due to its compact size and wide temperature range from -40°C to 85°C.
DRV8432DKDR
Texas Instruments' DRV8432DKDR is a Motion Control IC with 2 functions, suitable for Stepper Motor Controllers. It operates at -40 to 85°C, supports a max output current of 15A, and has a nominal voltage of 50V. The package style is small outline with gull wing terminals and measures 15.9mm in length.
DRV8412DDW
Texas Instruments' DRV8412DDW is a Motion Control IC with 44 terminals and 2 functions. It operates b/w -40 to 85 °C, supporting a supply voltage range of 0-50 V. Ideal for industrial applications, it offers a max output current of 15 A and peak reflow temperature of 260 C.
DRV8825PWPR
DRV8825PWPR by Texas Instruments is a Motion Control IC with 2.5A output current and 24V nominal voltage. Ideal for brush DC motor control, it operates in industrial temperature range (-40 to 85°C) and supports surface mount installation.
DRV8701ERGER
DRV8701ERGER by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage of 5.9-45V, and temp range of -40 to 125°C. Ideal for automotive applications, it features a compact square package with nickel/palladium/gold finish and no-lead terminals for precise stepper motor control.
DRV8711DCPR
DRV8711DCPR by Texas Instruments is a motion control IC with a nominal voltage of 24V. It features a small outline package style, dual terminal position, and can operate in industrial temperature grades. This stepper motor controller has a max supply voltage of 52V and is suitable for applications requiring precise motion control in various industries.
DRV8873HPWPRQ1
Texas Instruments' DRV8873HPWPRQ1 is a Motion Control IC with 24 terminals, operating voltage range of 4.5V to 38V, and temp grade for automotive applications. It features a small outline package with heat sink, suitable for brush DC motor control in harsh environments up to 125°C. The IC's nickel palladium gold finish ensures reliable performance in various conditions.
DRV8872DDARQ1
DRV8872DDARQ1 by Texas Instruments is a Motion Control IC with 24V nominal voltage and 3.5A max output current. Ideal for automotive applications, it features AEC-Q100 screening level, -40 to 125°C operating temperature range, and GULL WING terminal form.
DRV8302DCAR
DRV8302DCAR by Texas Instruments is a Motion Control IC with 56 terminals, operating voltage of 6-60V, and max output current of 1.7A. Ideal for automotive applications, it features a temp range of -40 to 125°C and terminal finish in NiPdAu.
DRV8870DDAR
DRV8870DDAR by Texas Instruments is a motion control IC with 8 terminals and a supply voltage range of 6.5V to 45V. It offers a max output current of 3.6A, making it suitable for brush DC motor control applications in automotive environments. With a compact rectangular package style and low profile design, it can operate in temperatures ranging from -40°C to 125°C.
DRV8701ERGET
Texas Instruments DRV8701ERGET is a Motion Control IC with 24 terminals, operating voltage of 5.9-45V, and temp range -40 to 125°C. Ideal for automotive applications as a stepper motor controller due to its compact square package and low supply current of 9.5mA.
DRV8873SPWPRQ1
DRV8873SPWPRQ1 by Texas Instruments is a motion control IC with a nominal voltage of 13.5V and a max operating temperature of 125°C. It is used as a brush DC motor controller in automotive applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved