Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DP83848YBX/NOPB by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate, operating at temperatures from -40 to 125 °C. It features a 3.3 V supply voltage, quad terminal position, and CMOS technology. Ideal for automotive applications due to its low profile and fine pitch package style.
Median Price
$28.398
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Texas Instruments
1+ parts
100+ parts
$25.243
1k+ parts
$18.561
10k+ parts
-
Nova Conductors
$23.201
Digiode
$26.978
Chip Stock
Rebound Electronics
Vyrian
Anansix
Cyclops Electronics Ltd
Technoshack Inc.
Sensible Micro Corp
Parana Technologies
$13.155
$13.661
ChromeModa Solutions
$14.781
$12.120
IDEA Electronic Components Group
$14.042
$13.303
Continental Prestige Electronics
$22.737
Netroflash
Ampacity Inc.
$24.140
Corphita
$25.558
Corohmni
$28.550
Advanced Electronics
$29.406
$27.936
Semicontronic
$52.540
$51.226
$50.964
Authorized Procurement Solutions
Lixinc
DigiPath Technology Company
$13.327
Futuretech Components
Argo Parts USA
The use of plastic/epoxy material makes the product lightweight and durable, ensuring long-term reliability.
Being surface mountable allows for easy and convenient installation onto circuit boards, saving space in the design.
Operates at a standard power supply voltage of 3.3V, making it widely compatible with various systems and devices.
Capable of operating at high temperatures up to 125°C, making it suitable for demanding industrial applications.
Supports a high data rate of 100000 Mbps, ensuring fast and efficient data transfer for networking purposes.
Network Interfaces DP83848YBX/NOPB attributes and parameters. Explore more Network Interfaces devices from Texas Instruments
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
DP83848YBX/NOPB Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
LM358DT
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
1N4148WS
Bytesonic Electronics
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
Tesla Elektronicke Soucastky
Sangdest Microelectronics (Nanjing)
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
KSZ9031RNXVA
Microchip Technology
Microchip Technology's KSZ9031RNXVA is an Ethernet transceiver with AEC-Q100 screening for industrial use. It features 48 terminals in a square chip carrier package, operating from -40 to 105°C. With a terminal pitch of 0.5mm and no-lead form, it suits telecom applications requiring a 1.2V supply voltage.
AR8033-AL1B-R
Qualcomm
Qualcomm's AR8033-AL1B-R is an Ethernet transceiver with 1000 Mbps data rate, operating at -40 to 85°C. It features a square chip carrier package with 48 terminals and a low supply current of 113.7 mA. Ideal for industrial applications requiring high-speed network interfaces in compact form factors.
DP83848HSQ/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: QCCN; Package Shape: SQUARE;
88E1512PB2-NNP2C000
Marvell Technology
Marvell's 88E1512PB2-NNP2C000 is a CMOS Ethernet transceiver with 56 terminals in a square chip carrier package. Operating b/w 0-70°C, it has a low profile of 1mm and requires 1.8V supply voltage. Ideal for network interfaces, this component suits telecom applications due to its compact size and surface-mount capability.
TJA1057GT/1Z
INTERFACE CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
VSC8514XMK-03
VSC8514XMK-03 by Microchip: 4 Ethernet transceivers, 1000 Mbps data rate, 605 mA max supply current. Ideal for automotive applications with -40 to 125 °C operating temp range. Chip carrier package style, square shape, surface mount design with 138 terminals.
MCP2542FD-H/SN
MCP2542FD-H/SN by Microchip Tech is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C, with 140 mA supply current and 5V nominal voltage. The small outline package has dual terminals and matte tin finish, making it ideal for surface mount designs.
ADM3057EBRWZ-RL
Analog Devices
ADM3057EBRWZ-RL by Analog Devices is a Network Interface IC with 20 terminals, operating b/w -40 to 105°C. It features Gull Wing terminals, 5V supply voltage, and small outline package style. Ideal for industrial applications requiring interface circuitry in compact spaces.
DP83848CVV/NOPB
DP83848CVV/NOPB by Texas Instruments is a 3.3V Ethernet transceiver with 100000 Mbps data rate. It features a quad terminal position, matte tin finish, and operates b/w 0-70°C. Ideal for network interfaces in commercial applications due to its compact flatpack design and fine pitch terminals.
TCAN1042HDRBRQ1
TCAN1042HDRBRQ1 by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates b/w -55 to 125 °C and has a supply voltage of 5 V. This network interface IC is designed for automotive applications, meeting AEC-Q100 standards.
PCA82C251T/YM
PCA82C251T/YM by NXP Semiconductors is a CAN transceiver with 8 terminals, operating from -40 to 125°C. It has a supply voltage of 5V and max current of 78mA, suitable for automotive applications. The package is small outline, surface mountable, with Gull Wing terminals.
TJA1043TKY
NXP Semiconductors' TJA1043TKY is a 14-terminal interface circuit with 5V supply voltage, supporting data rates up to 1 Mbps. AEC-Q100 screened for automotive applications, it features a small outline package with gull wing terminals and nickel palladium gold silver finish.
KSZ8863RLL-TR
Micrel
LAN SWITCHING CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
KSZ8851-32MQLI
KSZ8851-32MQLI by Microchip: Ethernet transceiver with 128 terminals, operates at -40 to 85°C. Package style is flatpack, fine pitch for industrial use in network interfaces. Features CMOS technology and matte tin finish on quad terminal position.
TCAN4550RGYQ1
TCAN4550RGYQ1 by Texas Instruments is an AEC-Q100 compliant interface circuit with 20 terminals in a chip carrier package. It operates b/w -40 to 125°C, making it suitable for automotive applications. With a compact size of 3.5mm width and 4.5mm length, it is ideal for surface mount designs in automotive electronics.
TCAN332DCNT
TCAN332DCNT by Texas Instruments is a network interface IC with 8 terminals, operating temperature range of -40 to 125°C. It features a small outline package style, nickel palladium gold terminal finish, and supports data rates up to 1 Mbps. Ideal for automotive applications requiring a reliable interface circuit with a supply voltage of 3.3V.
ISO1042QDWVRQ1
ISO1042QDWVRQ1 by Texas Instruments is an AEC-Q100 compliant network interface IC with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. Featuring nickel palladium gold finish, it has a terminal pitch of 1.27mm and nominal voltage of 1.8V.
TJA1044GT/1Z
AD9371BBCZ-REEL
AD9371BBCZ-REEL by Analog Devices is a network interface IC with 196 terminals in a grid array package. It operates b/w -40 to 85°C, suitable for industrial telecom applications. Features include a 1.3V supply voltage, tin silver copper terminal finish, and a compact square package shape of 12x12mm².
KSZ8041TLI-S
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DP83848IVVX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
DP83867IRPAPR
DP83867IRPAPR by Texas Instruments is an Ethernet transceiver with 8 transceivers, supporting data rate of 1000000 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a package style of flatpack with gull wing terminals. Ideal for network interfaces requiring high-speed connectivity in harsh environments.
DP83822IRHBR
DP83822IRHBR by Texas Instruments is an Ethernet transceiver with 4 transceivers, supporting data rate of 100000 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage of 1.8 V. Suitable for network interfaces, it comes in a square chip carrier package with 32 terminals and surface mount capability.
DP83848CVVX/NOPB
DP83848CVVX/NOPB by Texas Instruments is a 4-transceiver Ethernet IC with data rate of 100000 Mbps. It operates at 3.3 V, has quad terminals, and CMOS technology. Suitable for network interfaces, it comes in a square flatpack package with matte tin finish and can withstand temperatures from 0 to 70 °C.
DP83848IVV/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
DP83848IVV/NOPB by Texas Instruments is a 3.3V Ethernet transceiver with data rate of 100000 Mbps. It features a flatpack, low profile package style and operates in industrial temperature range (-40 to 85 °C). Ideal for network interfaces, it has 48 terminals and is surface mountable.
DP83867ERGZT
DP83867ERGZT by Texas Instruments is an Ethernet transceiver IC with a data rate of 1 Gbps. It operates in industrial temperature range (-40 to 105°C) and has a no-lead terminal form. The package style is chip carrier with 48 terminals, suitable for network interfaces applications.
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
DP83867IRRGZR
DP83867IRRGZR by Texas Instruments is an Ethernet transceiver with a data rate of 1Gbps. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage of 1.1V. This network interface chip comes in a square package with 48 terminals, suitable for surface mount applications.
DP83867ERGZR
DP83867ERGZR by Texas Instruments is an Ethernet transceiver IC with 1V supply voltage, supporting data rate of 1000000 Mbps. It operates in industrial temperature range (-40 to 105 °C) and comes in a square chip carrier package with 48 terminals for surface mount applications.
DP83867ISRGZR
DP83867ISRGZR by Texas Instruments is an Ethernet transceiver with 1V supply voltage and 1000000 Mbps data rate. It operates in industrial temperature range (-40 to 85 °C) and comes in a square chip carrier package with 48 terminals for surface mount applications.
DP83867IRRGZT
DP83867IRRGZT by Texas Instruments is an Ethernet transceiver with 1.1V supply voltage, 1000000 Mbps data rate, and operates in industrial temperature range. It comes in a square chip carrier package with 48 terminals for surface mount applications. Ideal for high-speed network interfaces requiring reliable performance in harsh environments.
DP83867ISRGZT
DP83867ISRGZT by Texas Instruments is an Ethernet transceiver with a data rate of 1Gbps. It operates in industrial temperature range (-40 to 85°C) and has a terminal pitch of 0.5mm. This network interface IC comes in a square chip carrier package suitable for surface mount applications.
DP83867IRPAPT
DP83867IRPAPT by Texas Instruments is a Network Interface with 4 transceivers, supporting data rate of 1Gbps. It operates in industrial temperature range (-40 to 85°C) and has a low supply current of 73mA. Ideal for Ethernet applications requiring high-speed connectivity in compact spaces.
DP83848IVVX
DP83848IVVX by Texas Instruments is an Ethernet transceiver with 48 terminals in a square package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It features CMOS technology, GULL WING terminal form, and requires a nominal voltage of 3.3V.
DP83640TVV/NOPB
DP83640TVV/NOPB by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate. It operates at 3.3 V, has 48 terminals in a square package, and supports surface mount technology. Ideal for industrial applications requiring reliable network interfaces in a compact form factor.
DP83867CSRGZT
DP83867CSRGZT by Texas Instruments is an Ethernet transceiver with 1V supply voltage, supporting data rate of 1000000 Mbps. It operates b/w 0-70°C, in a square chip carrier package style with 48 terminals. Ideal for network interfaces, it features nickel palladium gold terminal finish and very thin profile design.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved