Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, 2 ELEMENTS; Minimum Breakdown Voltage: 120 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Silicon Surge Protectors P2702AA60 attributes and parameters. Explore more Silicon Surge Protectors devices from Teccor Electronics
Maximum Breakdown Voltage:
Minimum Breakdown Voltage:
Configuration:
JESD-30 Code:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Surface Mount:
Terminal Form:
Terminal Position:
Trigger Device Type:
P2702AA60 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Teccor - Littelfuse Company Overview Teccor Electronics was a manufacturer of semiconductor products for the telecommunications and industrial market segments. The company manufactured two product groups: a line of transient voltage suppressor devices and a line of power switching devices. Tecor Electronics was acquired by Littelfuse in July, 2003. Teccor - Littelfuse Products The types of products manufactured by Teccor - Littelfuse include transient voltage suppressor devices and power switching devices.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
TISP4290M3BJ
TISP4290M3BJ by Texas Instruments is a single silicon surge protector with 32A peak current, 220V voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies due to its thyristor surge protection design.
SMP50-200
STMicroelectronics
SMP50-200 by STMicroelectronics is a single silicon surge protector designed for surface mounting. It features a non-repetitive peak on-state current of 16 A, a repetitive peak reverse voltage of 200 V, and operates b/w -55 °C to 150°C. Ideal for protecting circuits from voltage spikes in compact electronic devices.
NP0900SBMCT3G
NP0900SBMCT3G by Onsemi is a single silicon surge protector with 30A non-repetitive peak on-state current. It has a max DC off-state voltage of 75V and operates b/w -55 to 150 °C. Ideal for applications requiring protection against surges in electronic circuits.
TISP7240F3SL
TISP7240F3SL by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It has a non-repetitive peak on-state current of 7.1A and a max DC off-state voltage of 180V. This thyristor surge protector is ideal for applications requiring UL recognized protection against electrical surges.
SMTPB180
SMTPB180 by STMicroelectronics is a silicon surge protector designed for surface mount applications. It features a rectangular plastic/epoxy package, dual C bend terminals, and is ideal for protecting sensitive electronics from voltage spikes. Its compact size ensures efficient integration in various devices.
TISP4115M3BJ
TISP4115M3BJ by Texas Instruments is a single silicon surge protector with 32A peak current, 90V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection technology.
TISP4400M3LMFR
TISP4400M3LMFR by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, has 400V breakdown voltage, and UL recognized. Ideal for protecting electronic devices from power surges in various applications.
TISP5070H3BJR
TISP5070H3BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max breakdown voltage of 70V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
TISP5115H3BJ
TISP5115H3BJ by Texas Instruments is a single silicon surge protector with 60A peak current, ideal for protecting electronic devices. With a max operating temperature of 150°C and breakdown voltage of 115V, it is suitable for various applications requiring reliable overvoltage protection in compact designs. This surface-mount device features a thyristor surge protector configuration and UL recognition.
P3500SCMCLRP
Littelfuse
P3500SCMCLRP by Littelfuse is a silicon surge protector with a non-repetitive peak on-state current of 30A. It features a max DC off-state voltage of 320V and trigger device type as thyristor, suitable for protecting electronic devices from power surges. This surface-mount device has a small outline package style and operates in temperatures ranging from -40°C to 150°C.
MKP1V130
MKP1V130 by Onsemi is a Silicon Surge Protector with 1.5V max on-state voltage, 125 °C max operating temp, and 140V max breakdown voltage. It is used as a trigger device for surge protection applications in various industries due to its -40°C min operating temp and 100mA max holding current capabilities.
TISP4015L1BJR-S
Bourns
TISP4015L1BJR-S by Bourns is a single silicon surge protector with a non-repetitive peak on-state current of 22A. It features a max DC off-state voltage of 8V and a breakdown voltage of 15V, making it ideal for protecting sensitive electronics from power surges. This surface-mount device in a small outline package is UL recognized and commonly used in applications requiring reliable overvoltage protection.
P3403AC
The Littelfuse P3403AC is a silicon surge protector with 3 elements, 300V repetitive peak reverse voltage, and 50A non-repetitive peak on-state current. It is commonly used as a thyristor surge protector in applications requiring protection against electrical surges.
ST4
Powerex
SILICON SURGE PROTECTOR; Surface Mount: NO; Maximum On-state Voltage: 10 V; Maximum Breakdown Voltage: 18 V; Repetitive Peak Reverse Voltage: 9 V; Minimum Operating Temperature: -55 Cel;
NTVB275NSC-L
NTVB275NSC-L by Onsemi is a silicon surge protector with a max breakdown voltage of 350V. It operates in temperatures ranging from -40 °C to 150°C, making it suitable for various applications requiring protection against voltage surges. This surface-mount device features a dual-terminal configuration and tin finish, ideal for compact electronic designs.
NP1100SAT3G
NP1100SAT3G by Onsemi is a single silicon surge protector with a max DC off-state voltage of 90V and trigger device type as thyristor. It has a max operating temperature of 150 °C and is ideal for applications requiring UL recognized surge protection in small outline packages.
TPI12011NRL
TPI12011NRL by STMicroelectronics is a Silicon Surge Protector with 3 elements in a Delta configuration. It has a Non Repetitive Peak On-state Current of 8A and Max Breakdown Voltage of 160V. Ideal for surface mount applications, this device features Gull Wing terminals in a small outline package shape.
NP2100SET3G
NP2100SET3G by Onsemi is a Silicon Surge Protector with THYRISTOR technology. It has a max operating temp of 150 °C, min operating temp of -40°C, and max breakdown voltage of 240V. Ideal for protecting electronic devices from power surges in various applications.
TISP4240M3BJ
TISP4240M3BJ by Texas Instruments is a single silicon surge protector with 32A peak current, 180V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
TISP2260F3D
TISP2260F3D by Texas Instruments is a Silicon Surge Protector with 4A Non Repetitive Peak On-state Current. It features Delta Connected configuration, 200V DC Off-state Voltage, and UL Recognized standard. Ideal for surge protection in electronic circuits due to its 3-element design and 260V Max Breakdown Voltage.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Teccor Electronics
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved