Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DT04-12PA-BE03 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a polarized, crimped male connector with 12 contacts and UL94V-0 flammability rating.
Median Price
$6.320
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
TE Connectivity
1+ parts
$6.270
100+ parts
$3.760
1k+ parts
$3.140
10k+ parts
-
DigiKey
$6.750
$4.872
$4.422
Mouser Electronics
$4.870
$4.420
Future Electronics
$4.230
$4.070
Verical
VNN
$3.892
Nova Conductors
$3.972
Digiode
$5.956
Vyrian
Electro Sonic
$5.600
$4.020
IBS Electronics
$5.652
$5.442
NAC Semi
$8.660
$7.870
LJR Electronics
Cyclops Electronics Ltd
Argo Parts USA
Continental Prestige Electronics
Netroflash
$3.773
$3.694
Semicontronic
$5.330
$5.197
$5.170
Corphita
$5.643
Aztec Data Supply Inc.
$9.000
Perfect Parts
The compact size of the body allows for easy installation in tight spaces.
Can handle a high voltage, ensuring reliable performance.
Provides excellent insulation properties and durability.
Can withstand high temperatures, suitable for various environments.
Meets safety standards for flammability, ensuring product safety.
Capable of handling high current signals without overheating.
Allows for easy connection to cables, simplifying installation.
Provides a secure and reliable connection for cables.
The receptacle design makes it easy to plug in and secure connections.
Combination Line Connectors DT04-12PA-BE03 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DT04-12PA-BE03 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Mult Devs Alt Material 21/Sep/2021
PCN Assembly/Origin - Molding process chg 30/AUG/2022
PCN Packaging - DT0y - packaging chg 28/JUN/2021
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Goodwork Semiconductor
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
DS18B20U+
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
9-966140-1
TE Connectivity's 9-966140-1 is a Combination Line Connector with 18 contacts, rated at 24V and UL flammability code of 94-HB. With a body length of 1.811" and width of 0.791", it operates b/w -40 to 100°C, suitable for panel mounting applications.
AT04-12PA-BL08
Amphenol
The Amphenol AT04-12PA-BL08 is a Combination Line Connector with 12 contacts, rated at 13A signal current. It has a body size of 2.181" x 1.402" x 1.992", made of POLYETHYLENE for -55 to 125°C applications in cable and panel mounting setups.
DT06-6S-C015
TE Connectivity's DT06-6S-C015 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C, ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief.
1717394-2
TE Connectivity's 1717394-2 is a Combination Line Connector with dimensions of 0.638" x 1.63" x 0.787". Rated for 12V, it has GLASS FILLED POLYPHENYLENE SULFIDE insulator and operates b/w -30 to 105°C. With 24 contacts, it is used in board mounting applications for male connectors with SQ PIN-SKT contact style.
3-1437290-8
TE Connectivity 3-1437290-8 is a Combination Line Connector with Mating Contact Pitch of 0.118", Insulation Resistance of 100MΩ, and Rated Voltage of 250V. Ideal for applications requiring a reliable connector with UL certification, operating in temperatures from -40°C to 125°C.
350809-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: TIN/GOLD (30) OVER NICKEL; Additional Features: MATE-N-LOK; MIL Conformity: NO;
DT04-6P-CE03
TE Connectivity's DT04-6P-CE03 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a male contact style with polarized key.
776087-1
TE Connectivity's 776087-1 is a Combination Line Connector with 0.157" Mating Contact Pitch, suitable for board mounting with Tin Termination Finish. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 105°C, ideal for commercial applications requiring 8A signal current.
12162144B
Aptiv
12162144B by Aptiv is a Combination Line Connector with 4 contacts, rated at 14A signal current. It has a temperature range of -40 to 125°C, suitable for various applications. The connector features female contact gender and round pin-socket style, ideal for cable mounting with an empty shell design.
64319-3211
Molex
Molex 64319-3211 is a waterproof combination line connector with 32 contacts. Made of glass-filled PBT/PET, it has female crimp termination for cable mounting. Ideal for applications requiring reliable and secure electrical connections in harsh environments.
12010717
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
AT04-6P-RD01
The Amphenol AT04-6P-RD01 is a Combination Line Connector with 6 contacts, rated at 13A signal current. Featuring a body size of 0.961" x 0.827" x 1.886", it uses POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a receptacle shell style and male contact gender, suitable for various electronic systems.
DT06-12SB-CE13
TE Connectivity's DT06-12SB-CE13 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and plug body style with strain relief option.
1-480702-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-2; Additional Features: MATE-N-LOK; Mounting Type: CABLE AND PANEL;
ATP04-4P-KIT01
The Amphenol ATP04-4P-KIT01 is a Combination Line Connector with 4 contacts, rated at 25A. It features POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring male contact gender and crimp termination.
AT06-4S-RD01
The Amphenol AT06-4S-RD01 is a combination line connector with 4 contacts, rated for 13A signal current. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. With a body size of 0.862" x 0.717" x 1.244", it's ideal for cable mounting applications requiring female SQ PIN-SKT contacts in a plug shell style.
350779-1
TE Connectivity's 350779-1 is a Combination Line Connector with dimensions of 1.051" x 0.58" x 1.079". It offers Insulation Resistance of 100MΩ, operating b/w -55°C to 105°C. This connector has UL Flammability Code of 94V-0 and is suitable for commercial applications requiring a durable, female contact plug with crimp termination.
AT06-3S-RD01
The Amphenol AT06-3S-RD01 is a combination line connector with 3 contacts, rated for 13A signal current. It features a polyethylene insulator and operates in temperatures ranging from -55°C to 125°C. Ideal for cable mounting applications, this connector has a compact body measuring 0.91" x 0.724" x 1.14".
180916-0
TE Connectivity's 180916-0 is a Combination Line Connector with dimensions of 1.22" x 0.37" x 1.22". Made of POLYAMIDE, it operates b/w -40°C to 105°C and has UL Flammability Code 94V-2. Ideal for cable mounting applications at 115/230VAC, it features a male crimp termination and latching mounting option.
ATM06-12SA-BLK
The Amphenol ATM06-12SA-BLK is a 2-row combination line connector with POLYETHYLENE insulator. It has 12 contacts, rated at 7.5A for signal current, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female contact gender and plug body style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DT04-3P-P007
TE Connectivity's DT04-3P-P007 is a 1.89"x1.732"x.973" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 13A signal current. Operating from -55 to 125°C, it has a UL94V-0 flammability rating and features a polarized design for secure connections in cable mounting applications.
DT04-2P-E005
TE Connectivity's DT04-2P-E005 is a 1.818" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male contact gender and crimp termination with strain relief.
DT04-2P
The TE Connectivity DT04-2P is a combination line connector with 1.708" body length, 250V rated voltage, and GLASS FILLED POLYAMIDE insulator material. It is ideal for applications requiring a durable connector with 13A signal current rating, -55 to 125°C operating temperature range, and UL flammability rating of 94V-0.
DT04-2P-C015
TE Connectivity's DT04-2P-C015 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
DT04-2P-E004
TE Connectivity's DT04-2P-E004 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
DT04-2P-CE03
TE Connectivity's DT04-2P-CE03 is a 1.818" x 0.675" x 0.67" Combination Line Connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a male receptacle connector with strain relief option.
DT04-12PA-L012
TE Connectivity's DT04-12PA-L012 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized male receptacle with strain relief mounting on panels.
DT04-6P
The TE Connectivity DT04-6P is a combination line connector with 6 contacts, rated for 13A signal current and 250V voltage. Featuring nickel termination finish, glass-filled polyamide insulator, and UL94V-0 flammability code, it operates in temperatures from -55 to 125°C. Ideal for commercial applications requiring durable connectors with polarization key and strain relief mounting option.
DT04-3P-P006
TE Connectivity's DT04-3P-P006 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and comes with strain relief option.
DT04-4P-L012
TE Connectivity's DT04-4P-L012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and UL flammability code of 94V-0. Ideal for applications requiring a male contact style, crimp termination type, and panel mounting option with strain relief.
DT04-6P-CL09
TE Connectivity's DT04-6P-CL09 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a 13A signal current, this UL-rated connector features crimp termination and polarization key for secure connections.
DT04-3P
TE Connectivity's DT04-3P is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C. Ideal for applications requiring a polarized, male contact style connector with crimp termination and strain relief mounting option.
Connecteurs Electriques Deutsch
COMBINATION LINE CONNECTOR; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO; Body or Shell Style: RECEPTACLE; Manufacturer Series: DT;
DT04-2P-RT01
TE Connectivity's DT04-2P-RT01 is a 1.555" x 1" x 0.873" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a single receptacle connector with strain relief option.
DT04-3P-E008
TE Connectivity's DT04-3P-E008 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring polarized, UL-certified connectors with strain relief.
DT04-4P-E008
TE Connectivity's DT04-4P-E008 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief.
DT04-4P-C015
TE Connectivity's DT04-4P-C015 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
DT04-6P-CE02
TE Connectivity's DT04-6P-CE02 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and UL flammability code of 94V-0. Ideal for applications requiring a polarized, crimp termination male connector with strain relief mounting option.
DT04-12PA-P021
TE Connectivity's DT04-12PA-P021 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has 12 contacts, rated at 250V and 13A, suitable for applications requiring a temperature range of -55 to 125°C. The connector features UL94V-0 flammability code and polarization key for secure mating.
DT04-4P
The TE Connectivity DT04-4P is a combination line connector with 4 contacts, rated for 13A signal current at 250V. Featuring glass-filled polyamide insulation, it operates b/w -55 to 125°C and offers high durability with 100 cycles. Ideal for commercial applications requiring reliable male crimp termination in cable mounting setups.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved