Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DT06-4S-E004 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C, ideal for cable mounting applications requiring polarized connectors. The compact design measures 1.218" x 0.716" x 0.724", meeting UL standards with a flammability rating of 94V-0.
Median Price
$1.949
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$1.370
100+ parts
-
1k+ parts
10k+ parts
TE Connectivity
$1.880
RS Americas
$2.210
$1.750
$1.550
Mouser Electronics
$2.270
$1.630
$1.310
$1.270
DigiKey
$1.638
$1.462
$1.272
Conrad
$3.532
TTI
$1.380
$1.230
$1.140
Future Electronics
$0.950
Master Electronics
$1.583
$0.985
$0.976
Verical
$2.018
$1.174
$1.152
Vyrian
$0.845
VNN
Nova Conductors
$1.328
Digiode
$2.100
CustomConnectorKits
$2.490
$1.990
IBS Electronics
$2.125
$1.307
$1.294
NAC Semi
$1.840
EMSNET
LIBRA Elektronik GmbH
Electro Sonic
$1.790
$1.210
LJR Electronics
Semicontronic
$0.720
$0.702
$0.698
Continental Prestige Electronics
$1.302
Argo Parts USA
Advanced Electronics
$1.367
$1.298
Modulus Dynamics
$1.475
$1.460
$1.416
Corphita
$1.989
Allen Electronics Distributors
$2.460
$2.340
Aztec Data Supply Inc.
$10.550
Authorized Procurement Solutions
Netroflash
$1.262
$1.235
Robosynatics
Lucentia Tech
$0.438
EMSNET (Excess)
Assy Fe
The compact size of the body makes this connector suitable for applications where space is limited.
The slim width of the connector allows for easy installation in tight spaces.
The shallow depth of the body ensures that it can be easily integrated into various electronic devices.
The high voltage rating makes this connector suitable for use in a wide range of electrical applications.
The use of glass-filled polyamide ensures excellent insulation properties, making this connector safe and reliable.
The dual-row design allows for multiple connections, increasing the versatility of this connector.
The high operating temperature range ensures that this connector can withstand harsh environmental conditions.
The low minimum operating temperature makes this connector suitable for use in extreme cold environments.
The option for an empty shell allows for customization and flexibility in connector configurations.
The versatile design of this connector allows for various types of connections to be made.
The UL 94V-0 flammability rating indicates that this connector meets stringent safety standards.
The polarization key ensures proper alignment and connection of the connector, reducing the risk of errors.
The high current rating makes this connector suitable for handling power-hungry devices.
The UL certification guarantees the quality and safety of this connector.
The multiple contacts allow for complex connections to be made with ease.
The single connector design simplifies installation and maintenance.
The precise row spacing ensures a secure and stable connection between mating contacts.
The cable mounting option provides flexibility in installation and connection methods.
The standardized terminal pitch allows for easy compatibility with other connectors and components.
The high mains connector rating ensures that this connector can handle heavy-duty electrical loads.
The female contact gender makes this connector compatible with a wide range of male connectors.
The plug-style body design makes it easy to connect and disconnect the connector as needed.
The mounting option with strain relief provides added protection and longevity to the connector and attached cables.
Combination Line Connectors DT06-4S-E004 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Total No. of Contacts:
UL Flammability Code:
DT06-4S-E004 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - DT0y- Housing chg 06/APR/2021
PCN Assembly/Origin - Tooling Capacity 29/APR/2022
PCN Packaging - DT0y - packaging chg 28/JUN/2021
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
12047931
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Additional Features: COMPATIBLE CONTACT: 12045773; 12077628;
DF62W-6EP-2.2C
Hirose Electric
COMBINATION LINE CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
DTP04-4P-L012
TE Connectivity's DTP04-4P-L012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C, ideal for panel mounting applications requiring a polarized, UL-certified connector with male contact gender.
350836-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 12; Empty Shell: NO; UL Flammability Code: 94V-0;
1-1564416-1
TE Connectivity 1-1564416-1 is a Combination Line Connector with dimensions 1.673" x 1.852" x 1.567". It has a rated voltage of 60V, UL flammability code of 94V-0, and can handle up to 20A current. Ideal for applications requiring male connectors with polarized polarization key and GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material.
DRC23-40PA-N012
TE Connectivity's DRC23-40PA-N012 is a 4-row combination line connector with dimensions of 1.785" x 3.8". Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications requiring a polarized, soldered male receptacle with UL certification (94V-0).
DTP04-4P-P052
TE Connectivity's DTP04-4P-P052 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C. Ideal for panel mounting applications requiring a polarized male connector with UL certification.
10763414
Aptiv
COMBINATION LINE CONNECTOR;
776200-1
TE Connectivity's 776200-1 is a combination line connector with dimensions of 2.394" x 1.264" x 0.757". It has a max operating temperature of 105°C and a min operating temperature of -40°C. This connector, made of POLYBUTYLENE TEREPHTHALATE, is suitable for board mounting applications and has a rated current of 8A.
ATM04-12PA
Amphenol
The Amphenol ATM04-12PA is a 2-row combination line connector with POLYETHYLENE insulator. It has 12 contacts, rated at 7.5A for signal current, and operates b/w -55°C to 125°C. Ideal for cable mounting applications with multiple mating parts available.
30700-1207
Molex
The Molex 30700-1207 is a Combination Line Connector with dimensions of 1.208" x 0.928" x 1.243". It has 20 contacts, rated for 7A signal current, and operates b/w -40°C to 100°C. Ideal for board mounting applications requiring male SQ PIN-SKT contacts in SYNDIOTACTIC POLYSTYRENE insulator material.
171725-1
TE Connectivity's 171725-1 is a COMBINATION LINE CONNECTOR with dimensions of 1.705" x 0.709" x 1.437". Made of POLYAMIDE66, it has 13 contacts in 2 rows and UL94V-2 flammability rating. Ideal for CABLE mounting, this male connector meets UL standards.
DT04-4P
The TE Connectivity DT04-4P is a combination line connector with 4 contacts, rated for 13A signal current at 250V. Featuring glass-filled polyamide insulation, it operates b/w -55 to 125°C and offers high durability with 100 cycles. Ideal for commercial applications requiring reliable male crimp termination in cable mounting setups.
15300027
Aptiv's 15300027 is a Combination Line Connector with POLYAMIDE66 insulator. It has 2 contacts, female gender, and crimp termination. Used for cable mounting, mating with 15300002 connector shell, ideal for automotive applications.
282189-1
TE Connectivity 282189-1 is a Combination Line Connector with dimensions of 0.937"x.866"x1.476". Rated for 24V, it has POLYAMIDE insulator and operates b/w -30 to 125°C. With 20A signal current, it features polarized housing and female contact gender, suitable for cable mounting applications.
15316895
DTM04-08PA-EE04
TE Connectivity's DTM04-08PA-EE04 is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
2103124-4
TE Connectivity's 2103124-4 is a Combination Line Connector with EMI shielding, male contact gender, and blade pin-skt contact style. It has a body length of 1.78", width of 1.59", and depth of 1.224". Ideal for commercial applications requiring a mains connector rating of 115/230VAC.
54200409
Fci
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Insulator Material: POLYAMIDE; Mixed Contacts: NO;
ATM04-6P
The Amphenol ATM04-6P is a male receptacle combination line connector with 6 contacts, rated for 7.5A signal current. It has a compact body size of 0.756" x 0.937" x 1.72", suitable for cable mounting applications in environments ranging from -55°C to 125°C. Made of polyethylene, it features round pin-socket contact style across two loaded rows.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DT06-3S-C015
TE Connectivity's DT06-3S-C015 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring UL94V-0 flammability code and crimp termination.
DT06-6S
TE Connectivity's DT06-6S is a 6-contact combination line connector with insulation resistance of 1GΩ, rated voltage of 250V, and operating temperature range from -55 to 125°C. Ideal for cable mounting applications in commercial settings due to its durability, polarization key feature, and UL reference standard compliance.
DT06-2S-CE06
TE Connectivity's DT06-2S-CE06 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, 13A signal current rating, and is ideal for cable mounting applications.
DT06-3S
Connecteurs Electriques Deutsch
COMBINATION LINE CONNECTOR; IEC Conformity: NO; DIN Conformance: NO; Manufacturer Series: DT; Body or Shell Style: PLUG; MIL Conformity: NO;
TE Connectivity's DT06-3S is a 3-contact combination line connector with insulation resistance of 1GΩ, rated voltage of 250V, and operating temperature range from -55 to 125°C. Ideal for cable mounting applications, this female connector features nickel termination finish and glass-filled polyamide insulator material.
DT06-2S-E008
TE Connectivity's DT06-2S-E008 is a 1.611" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a crimp termination with strain relief.
DT06-2S-C015
TE Connectivity's DT06-2S-C015 is a 1.118" x 0.591" x 0.621" combination line connector with 250V rated voltage and -55 to 125°C operating temperature range. Featuring glass-filled polyamide insulator, it has 13A signal current rating and UL flammability code of 94V-0. Ideal for cable mounting applications, this polarized connector offers crimp termination and female contact gender.
DT06-6S-CE06
TE Connectivity's DT06-6S-CE06 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT06-2S-CE05
TE Connectivity's DT06-2S-CE05 is a 1.228" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design with 13A signal current capacity. Ideal for cable mounting applications requiring crimp termination.
DT06-2S
TE Connectivity's DT06-2S is a 1.118" combination line connector with insulation resistance of 1000000000 ohm, rated voltage of 250V, and operating temperature range from -55 to 125 °C. It features a glass-filled polyamide insulator and is ideal for commercial applications requiring a durable, polarized female connector with crimp termination.
DT06-12SA-CE06
TE Connectivity's DT06-12SA-CE06 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a polarized design and UL certification.
DT06-2S-EP06
TE Connectivity's DT06-2S-EP06 is a 1.228" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, supports 13A signal current, and uses crimp termination for cable mounting applications.
DT06-12SA-E008
TE Connectivity's DT06-12SA-E008 is a 2-row combination line connector with 12 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT06-12SA-P012
TE Connectivity's DT06-12SA-P012 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT06-4S-E008
TE Connectivity's DT06-4S-E008 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring polarized design and UL flammability rating of 94V-0.
DT06-12SA-C015
TE Connectivity's DT06-12SA-C015 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief.
DT06-2S-P012
TE Connectivity's DT06-2S-P012 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125 °C operating temperatures. It features a polarized design, UL certification, and can handle up to 13A signal current. Ideal for cable mounting applications requiring a female plug contact style with strain relief option.
DT06-12SA
TE Connectivity's DT06-12SA is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring UL certification and polarization key for secure connections.
DT06-3S-E008
TE Connectivity's DT06-3S-E008 is a 1.601" x 0.796" x 0.968" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation at 250V. It features 3 contacts, UL94V-0 flammability rating, and supports up to 13A signal current. Ideal for cable mounting applications requiring crimp termination and polarization keying.
DT06-12SA-CE10
The TE Connectivity DT06-12SA-CE10 is a Combination Line Connector with dimensions of 1.218" x 0.716" x 1.597". It has a rated voltage of 250V, UL Flammability Code of 94V-0, and can handle up to 13A current. Ideal for applications requiring a polarized, female plug connector with strain relief mounting for cables.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved